23adrock's latest activity

Like I said as long as they follow the proper shutdown procedure for the Tesla then it’s the same as any. pages 1-17 here...

Installation should be straight forward. If I can do it, and the local shop cannot, you should tell the owner of the shop to pivot to...

I did it with zero experience so I’m sure a shop would have no problems as long as they follow the proper shutdown/disconnect sequence...

Yesterday I completed my install. I would say the "hardest" part was the jack nut. I used a step up drill bit and made micro...

For sure, was just detailing the lazy man’s method lol

Glad to hear!

As stated above, the important thing is to give the amp as much power as you can without clipping. That way you don’t starve it. The...

Sent you a PM

Great. You feel the bass presence, and that low bass is no longer nonexistent. Plus you can tune it to your liking.

You can see a photo of the T-taps I used on page 2. For most wires I used blue taps (14-16 AWG) and for the power/ground I used yellow...

Looks good, that amp is huge! I hope you don’t run into the can’t maintain power issue. It’s a pain.

Yeah I mean the wavelength of low bass is going to be a little different but I agree it wouldn’t seem to make a difference in this case...

I believe it is because the subs are on the opposite sides of the car so the sound waves would cancel each other out? I guess it would...

Wanted to post this to settle the ‘keep the stock sub connected or not’ debate

Yeah I had to loosen that nut to rotate my mounting bracket into position too