Ulmo
Active Member From Vienna Woods, Aptos, California
Latest activity Postings About
-
-
Ulmo reacted to arnolddeleon's post in the thread 04.08.2024 - Solar output... Ooops, I forgot :) with
Like.
I actually was looking at the solar output data to see how visible the eclipse was in the production data. Of course, it helps that is... -
Ulmo reacted to JKennedy442's post in the thread 04.08.2024 - Solar output... Ooops, I forgot :) with Like.
I was in 97% in upstate NY I believe, so mine was pretty much 0 for a bit there:
-
Ulmo reacted to furuike's post in the thread 04.08.2024 - Solar output... Ooops, I forgot :) with Like.
I live in totality zone. Production dropped to 0.0kW, no fooling.
-
Ulmo reacted to charlesj's post in the thread 04.08.2024 - Solar output... Ooops, I forgot :) with Like.
I am in the same boat, forgot it affected my area even a bit. Almost a 2 hour even dip.
-
Ulmo reacted to dho112's post in the thread 04.08.2024 - Solar output... Ooops, I forgot :) with Like.
Baby Shark! Lol!
-
Ulmo reacted to Matt-FL's post in the thread 04.08.2024 - Solar output... Ooops, I forgot :) with Like.
Skycam footage (not terribly exciting, but you can see the sun dim around 3:07 - peak - from the partial eclipse over Florida).
-
Ulmo replied to the thread 04.08.2024 - Solar output... Ooops, I forgot :).What's mine? 11:00 was >2.4 and 11:10 was ~2.4, just looking at these screenshots. ~2.4 seems like the dip (note the rounding was...
-
-
Ulmo reacted to dho112's post in the thread 04.08.2024 - Solar output... Ooops, I forgot :) with Like.
So this afternoon I was looking at my solar performance (So happy with the TeslaPowerwall and solar setup!) In the morning I was...
-
I suspect that the Tesla firmware only records an out of bounds error. FWIW: if it were me, I would not design the circuit to stick...
-
Ulmo replied to the thread Powerwall Reset During Grid Outage.Mine sure did. My two PW2's used to be able to handle a 6kW electric dryer starting without a glitch, and now they definitely cannot...
-
So, the hot hub is one of the backed up loads? Are these loads new after the PW's were installed? If so, the overload explanation...
-
I've had my Powerwalls reset when an excessive draw occured (i.e. heat pump tried to start). I know you said you cisconned the highg...
-
Ulmo replied to the thread Powerwall Reset During Grid Outage.That doesn't seem anywhere near right. 250VACrms is the nominal voltage, and 125VACrms the nominal split voltage. I've seen our actual...
-
Ulmo replied to the thread Powerwall Reset During Grid Outage.I see your load go up at 2:20PM to 8kW. What's your PW max output? Mine used to be more resilient, but now when I put a huge load like...
-
PW2 has 948 cells, and 21700 cells and if 20wh per cell that is 18,960wh per powerwall. 13,500/18,960=70%, so looks like tesla pw...
-
-
Loading…
-
Loading…
