Recent content by AngryCPA

If you really don't care about the extra speed, the Standard Range + will be fine for your needs and is not slow by any means. White seats are actually more comfortable (slightly softer) and don't really seem to stain in my experience.

After having had my glovebox replaced 2x for failing to open, I keep my registration in the center console now. Can’t imagine it would go over well if you got pulled over and told the cop you couldn’t open the glove box!

Using a Spigen case on my 12 Pro Max with the Nomad charger and you basically have to wedge it in, but it works!

I've had my glovebox replaced twice and adjusted one other time due to this issue. Luckily this is something a ranger can fix so if they are available in your area you won't need to take it in. Related: I don't keep my registration in the glovebox anymore

I've done UK 3.0 on 2 different model 3's, its pretty hard to mess up, it flashes pretty quickly, but be careful, if you are sloppy you will get streaks in areas you miss. Be careful not to get it on the glass because it will streak and is very difficult to remove. I learned from my mistakes and...

Just got the car back, it ended up being $117!

I recently got an error about the 12v battery needing to be replaced so I made an appointment with the Santa Ana service center. They are replacing the battery under warranty and quoted me $156 to do an alignment.

Need to get mine aligned too, im also in OC. Keep us posted where you end up going.

Primacys were 236wh/mi lifetime when they were replaced. Since switching to PS4S, averaging about 270wh/mi. Aeros with covers off. To be fair, i replaced the tires at the beginning of quarantine, so most of the driving on the PS4S has been at higher speeds.

All 4 of mine were below the wear bars at 20k miles and had to be replaced (LR RWD). Rotated 2 or 3 times.

Check out this link, will explain it better than I can. There are probably better resources out there, but this will give you a basic idea.

The hubcentric rings are on the inside. If there is a gap between the center of the wheel and the hub the result can be vibration at various speeds which seems to be your issue. The wheels do look good! Hopefully you figure out the vibration.

Did the wheels require hubcentric rings? Sounds like they may not be the right size or missing. Have you noticed any improvements to your economy/acceleration with the new wheels?

PM’ed

Damn, I love your floors! :) GLWS!