appleguru

Latest activity Postings About

• • A

    appleguru replied to the thread HDMI interface to the touchscreen.

    I have one… it’s sadly not so easy.

    Oct 27, 2023
  • A

    appleguru replied to the thread Electrician installed wall connector using Romex 8/3 + 60A breaker.

    Let me be explicit: If you have #6 NM-B wire for your EVSE: -If your wiring is not run through insulation and your state allows for the...

    Oct 9, 2023
  • A

    appleguru replied to the thread Electrician installed wall connector using Romex 8/3 + 60A breaker.

    I just want to clarify that NM-B in the US and NMD-90 in canada are very similar in terms of both ratings and physical construction...

    Oct 7, 2023
  • A

    appleguru reacted to SageBrush's post in the thread Electrician installed wall connector using Romex 8/3 + 60A breaker with Disagree.

    You have provided evidence that you are not an electrician, and can misinterpret the NEC with the best of them

    Oct 7, 2023
  • A

    appleguru reacted to SageBrush's post in the thread Electrician installed wall connector using Romex 8/3 + 60A breaker with Like.

    I'm reasonably sure (but not 100% positive) that the round up rule for a branch circuit breaker references the wire ampacity, not the...

    Oct 7, 2023
  • A

    appleguru reacted to Rocky_H's post in the thread Electrician installed wall connector using Romex 8/3 + 60A breaker with Disagree.

    No, you made the same mistake of misunderstanding the round up rule as way too many electricians do. It's explained really well in this...

    Oct 7, 2023
  • A

    appleguru reacted to davewill's post in the thread Electrician installed wall connector using Romex 8/3 + 60A breaker with Like.

    Not what the dude said. He merely said you could use the 60a breaker. He didn't say you could charge at 48a on#6 NM-B.

    Oct 7, 2023
  • A

    appleguru replied to the thread Electrician installed wall connector using Romex 8/3 + 60A breaker.

    I did not make that mistake. Re-read my posts… I merely said that a 60A breaker is the correct size 99% of the time for #6 NM-B, which...

    Oct 7, 2023
  • A

    appleguru replied to the thread Electrician installed wall connector using Romex 8/3 + 60A breaker.

    Given that I’ve already provided proof of exactly this above… I’m in.

    Oct 7, 2023
  • A

    appleguru replied to the thread Electrician installed wall connector using Romex 8/3 + 60A breaker.

    How do you read it? And of course they do. The NEC itself is merely a guideline. In the US, it is up to each state (and in some case...

    Oct 7, 2023
  • A

    appleguru reacted to SageBrush's post in the thread Electrician installed wall connector using Romex 8/3 + 60A breaker with Disagree.

    I don't read it that way *at all*; and in fact, states do not have the right to set provisions more lax than than the NEC

    Oct 7, 2023
  • A

    appleguru replied to the thread Electrician installed wall connector using Romex 8/3 + 60A breaker.

    There is no problem running romex in conduit, nor does such an installation need a de-rating as a result of running it in conduit (and...

    Oct 7, 2023
  • A

    appleguru replied to the thread Electrician installed wall connector using Romex 8/3 + 60A breaker.

    It’s more complicated than that even, as some states amend the NEC to change the rules, for example here in MA. The 2020 NEC (NFPA 70)...

    Oct 7, 2023
  • A

    appleguru replied to the thread Purchased Tesla 2017 Model S 90D, Received 60D.

    You should under no circumstances accept $3000. if I were you, I would get a quote from tesla to install a 90kWh pack and demand that...

    Sep 9, 2023

  Show older items
• Loading…
• Loading…