Recent content by crazykushu

My setup is 6.9 kW solar array, with a 6.6 kW inverter. Charging from solar maxed out at 3.3kW, but discharging the battery will exceed 3.3kW, depends on how much power my house was using, I saw 8-9kW sometime during peak, or even 5-6kW continuously. So back to my initial question, why the...

Update: now I'm on 1.9.1. when I checked the app this morning, no matter I'd I set it to back up only, or self powered mode, the battery won't charge at all and stayed at 0%, sad.

So the spec for the discharging rate is 7kW peak / 5kW continuous, and I've noticed that during my grid outage, it serves pretty good and exceeded the 7kW spec for peak usage. However, the charging rate to the powerwall 2 is peaked out at 3.3kW from my solar panel, so any excess is sold back to...

Hopefully by next Monday they will roll out the new firmware.

Once again, my power wall 2 won't charge or discharge, under backup only, or self powered mode.

Update: I changed the setting to backup only, and after 11 o'clock, my power wall stop charging itself and stayed standby at only 80% charge. Seems like the issue is not completely fixed. BTW, I have solar.

As of right now, my power wall 2 is doing the self power mode as usual, seems like they fixed the issue from their end. @trbeals, I noticed that once you changed the setting in your app, it will be synchronized with the battery at the exact whole hour. For example, you changed your settings at...

Just call their customer support.

Unfortunately no, the tech said they would contact me through email and a phone call once they have progressed.

Just on the phone with the techs at Tesla, regarding an issue with the Powerwall 2 does not initiate self-power mode anymore. I noticed this issue after the Tuesday 1.9.0 OTA update, and I attempted to switch between Backup only and Self-power to see if it will trigger the change, nothing...