Recent content by downshift00

Bump

PMed

PM'ed

As the title says, Unplugged rear sway bar for 3 Performance. See pics. $230 shipped within the continental U.S. Was on my old 2018 P before I removed it when I sold the car.

So I just emailed them. 10mm is the max they do for slip on spacers. Any bigger has studs on them. Ya i guess 7 turns might be fine in the streets. They charge $85 a pair for the 10mm. I'd rather just go with bolt on big spacers than pay 170 for 10mm when I have 8mm for 20bux that still allow...

Oh nice. What do they charge for those? Why not just go to the 14mm instead of 10mm since that can be used with the ET lugs?

I heard it was 7.5 minimum or was it 8.5? i forget. When I say lip, I mean the hub lip to mimic the continuation of the hub. Normally, 5mm spacers don't have a hub lip. The stock wheel mating surface is carved out 2.5mm for the 70.5 mm lip before it goes to 64.1mm. The 8mm spacers were 20bux...

They

So I did testing with the 8mm and 10mm spacer with stock and ET shank lugs from amazon that had those splines. 8mm spacer - normal lugs 7 turns so not enough to use 10mm spacer - ET lugs 12.5 turns, obviously didnt try regular lugs So none of these spacers had a lip. Even though the 10mm...

Here you go https://www.amazon.com/dp/B08L75GQS3?psc=1&smid=A12BDL2AJ0LRAA&ref_=chk_typ_imgToDp

LOL ya I noticed that after I bought them. Ooops.. I canceled... I thought they were M14. I still have my current ET lugs that I use. Those will have to do for now.

They seemed about the narrowest. Are they more narrow than the ones I have now? I will find out tomorrow LOL. I wanted to try them because the spline part is narrower and easier to get into wheel holes that are not as wide.

Ya like P3D-R said, measure the hole of the wheel first. These are the ones I currently have 20PC BLACK 14X1.5 THREAD EXTENDED (ET) STYLE CLOSE END WHEEL LUG NUT 3/4'' HEX | eBay. I bought these and they will be arriving tomorrow...

I just was using a small 5mm spacer and tried those ET shanks a couple years back and they worked. I am going to be trying the 8mm and 10mm spacer tomorrow with those same lugs.

Ya, they are closed ended. They haven't bottomed out. I have about 37mm from open end to top of the lug.