Recent content by lr1001

Now on my 3rd month of ownership--I still have that same impression. It has not yet faded!

I forgot the first song, but the most appropriate in the right traffic situation is KMFDM-Angst. Its like the car plugs into me like the borg assimilating me into the collective.

I have to admit that I ordered the car online 4 years ago-or there abouts. After all that wait, I waived on getting in line to drive and alpha/beta model. I do not regret the wait. My jaw is dragging a bit on the ground both during and after my comute now a month into ownership. Without any...

The last pic above shows the rear pillar. Once you enter through the boot into the roof, its drops into the space shown above-about 2-3 inches and it drops down right as shown. You are then inside the vehicle and it simply runs under the trim to the floor and along the interior molding right...

Yes, I agree, the shifters could be better spaced. At least they point straight ahead and are level. I probably could move them laterally another inch or two. I originally tried to get them under the lights but the angle and mounting was just not workable. I abandoned that idea for the...

Sure, you can pm me--I think that I have to change some settings. Its actually pretty straight forward and honestly, any local installer will be totally making it up having never seen this beast. I did take my time figuring things out--a measure twice cut once approach. I did put a through...

funny you should ask. It was more challenging. I entered through the passenger side lic plate light. The handle on that side with the trunk switch pops out and give access. I used a dremel to make a small channel, passed the wire and put a small piece of electrical tape over. It worked...

I guess that I paid full price. If you shop the discounted price, be sure you read the fine print. I noticed some the cheaper priced units on ebay were not complete. Then you start to wonder about reconditioned units, etc.

Did the install-9500ci. The frunk comes apart pretty easily. I accessed the front frame behind the nose cone to mount the radar. To do it through the nose piece would not leave a reasonable way to fasten the radar frame down. the laser shifters installed just below the nose piece in front of...