sorka's latest activity

This location was years over due.

My 2015' purchase agreement just says "supercharging capable". Nowhere on any document that I have does it say free unlimited...

Right. Typo. I think I used closed everywhere else where power is flowing.

Here is my custom SMT tab that covers all the parameters I like to see..

So while asleep, my main pack amps are 0.4. DC-IN is 144 watts @ 5 amps and DC out is 68.5 watts. Powertrain pump2 is circulating at...

With the MCU2 upgrade, your contactors would stay open and your 12v battery would stay topped off and no longer cycle.

I cheated and let teslafi do it for me.

That script is no longer working for anyone.

You just answered my question in the thread I started: Gave me quite a shock when I disconnected the 12v battery after the MCU2 upgrade...

I already have SMT installed. Let me run out and check. It says battery pump 1 and 2 are at 0%. I can still hear the faint whirling...

How can I tell the pump speed? So at 75% it seemed to have instantly stopped but it turns out the pumps are still running but just...

So as an experiment, I charged to 80% at the new supercharger in Merced today. I drove home and parked it at 76%. I'd normally never let...

Mine starts at 80KW at 27%. Certainly nowhere near high 80s let alone high 90s...not even for a second.

I'm not seeing anything as low as a starting 85KW with 20% SOC in the fleet graphs.

No. I said the initial upgrade gave me a 9.6% increase in power. The software I'm on now dropped amps from 1525 to 1500 resulting in...