Recent content by thetuk

Interesting. Mine is opposite, driver side is bigger. SC says dashboard can’t be adjusted and doors can’t be adjusted without creating unflushed exterior door and panel surfaces. I will just have to live with it.

On the interior pictures, I am not sure what the issue is? My 2023 MYLR looks like that too but my concern was the uneven gaps between the door panel and dashboard on both sides. The driver side gap is wider than the passenger side. I have an appointment next week and will see what they say.

Would you mind enlightening me how to redo the ground connection properly? Yes, I use Bryant Nema outlet.

Thank you for the input. Im most concerned if the current install will cause electrical and fire hazards? Also I do not think inspection/permit is required for this install. PS I did not upgrade the panel.

So this is electrically correct install and redo is not necessary?

I just had Nema 14-50 outlet installed by an Electrician. When I swapped out the cover plate, I noticed the Green wire was abit strange, not sure why it was not run all the way to the outlet in one piece. I am no electrical expert and would appreciate your input. If it was not installed and...

I just had Nema 14-50 outlet installed by an Electrician. When I swapped out the cover plate, I noticed the Green wire was abit strange, not sure why it was not run all the way to the outlet in one piece. I am no electrical expert and would appreciate your input. If it was not installed and...

at 101 miles, they should cover it under what they call "rectification period" as long as they determine the scratching is pre-existing.

I decided not to take it to body shop. They touched up the corner one and for the small clear coat bubbles, I decided not to do anything. I have heard stories about cars coming back from body shop looking worse. Hopefully I made the right decision and these two spots will not get worse overtime.

Glad this thread is revived. I just noticed the dashboard off center yesterday after having owned it for 2 weeks. I have an appointment with SC on Wed and will bring this up with a tech. There have not been any issues and exterior door panels line up well so I am a bit hesitant to have SC...

Make sure you do not use too long screws that might go through the OEM plate holder and risk damaging the paint.

Wondering if you can share an update? Hope everything went well.

Found this on Tesla website what is considered normal operating sounds.....not sure if the "booming noise" falls under "While Parked" "Clicking, Clunking, or Thumping Sound From Floor of Vehicle" https://www.tesla.com/ownersmanual/modely/en_us/GUID-AA58ED67-9C93-4EE6-8B19-9FDABE018787.html

You measured panel gaps at two totally different locations and expected them to have the same gap dimensions? Am I missing something here? How about the gaps of both tail lights?

After you try to add a bank, on the screen where you select a bank, scroll to the very top and look for search bar. In the search bar, put in "random" letters such as ZZZZZZZ, now the system won't find any bank with those random letters and it will give prompt you to manually add ACH...