Recent content by Tranceporter

H&R lowering springs 28659-1 Had these on my Model 3 2021 Refresh Long Range AWD for 4000 miles. £150 plus postage. Attached a pic of how the car looked when lowered. I also have a set of spacers, but since I do not have the exact size at hand, I have not posted the details here. DM me if...

No rubbing with the diffuser. I do get some rubbing on the front splitter at speed or 20mph zones. I did not change the lugs. 5mm spacer is pretty thin anyway.

Nice one. I ended up swapping my 19" v2 with the pre-refresh 20". Also added Maxton front lip and rear diffuser with H&R springs. I have 15mm spacers on the rear and 5mm on the front. Pretty pleased with the results.

Have you thought about doing an A/B test by swapping the wheels from your mates car to yours? Would be a quick test to see if the vibes go away. I feel they might. And if they do, then you have proof to show to Tesla Edinburgh.

As I suggested earlier, Ask them to swap alloys and tyres like forlike from another car, and let you do a quick test drive. If you feel that the vibes are gone, then ask them for a replacement set (or keep the one they have swapped from the other car)

My problem was fixed by swapping from 19" new style sports to 2020 (pre refresh) 20" performance alloys. But I think the real issue in my case was the 19" Hankook run flats which caused the vibration. Now I have no vibration whatsoever. So if you guys are facing this issue, the simplest...

No, I ended up swapping 20" performance alloys instead, That added a bit of offset as is. I have got 5mm spacers with me, going to try that soon.

If you have a forum member living close to you and have pre-refresh alloy wheels (19 or 20") without the run flats, I think you should try swapping his alloys onto yours and see if the problem goes away. By all means buy him a drink or pay him for his time, but it would be hell lot cheaper...

Ok all installed and charging. Installation took couple of hours. I have zero knowledge about electrical stuff, so I will post a pic of the electric meter unit and the SyncEV wall charger.

I had a Whatsapp video call with their sales director and he basically stated that their chargers are similar to Zappi and do not need earthing rod. Pluys it was cheaper. They are a smaller company. Give them a shout and see how you like it. Having it installed today, so wil post pics once done.

Not the same, but I have iphone 11 pro max for sale. I thought I would reply here since you did not reply to my conversation in the past.

Looks much better one lowered I must say! Very cool! Curious to see how the 2021 LR looks since the alloys wheels have the new flat look

Yes. Also think they are run flats which might be leading to more vibrations. The Michelin T0 are not run flat (I am told), so I presume they do a better job at soaking some vibrations

As an update, a member on M3 facebook group was selling his 20" pre-refresh performance. I swapped them today, and he vibrations have mostly gone away. So either my alloys came bent from the factory, or the Michelins on the 20's are better than the hankooks. That being said, the vibrations still...

So I swapped my new style 19” with old style performance 20” with 15mm spacers and 20mm in the rear. I forgot that the 20” come with 245 tyres and 19” come with 235 tyres, so that 10mm extra right there. So ordered a new set of 5mm spacers for the fronts, and going to swap the 15mm to the rear...