Recent content by vypr

This is the one specifically for the Model 3 and BlackVue BlendMount Dashcam Aluminum Rearview Mirror Mount,Specialty Series,BBV-4014,BlackVue DR900S/DR750S

I have mine raised a bit higher, but low enough that the housing for the autopilot camera doesn't block the view

I ordered these molex connector and header https://www.mouser.com/ProductDetail/molex/43645-0400/?qs=UeCeOHRHQeYNxHEFIKuxFQ%3d%3d&countrycode=US&currencycode=USD https://www.mouser.com/ProductDetail/molex/43030-0038/?qs=iR2ablhfrmH0DHKONOVAeg%3d%3d&countrycode=US&currencycode=USD When you say...

I just re-wired all my wiring using this video as a guide and cleaned everything up and made sure my wires are no longer in the way of the airbags

this was the relay module I purchased https://www.amazon.com/gp/product/B00EQB8O7K/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1

oops, I posted the same video twice, this one is the correct one for removing the panel

Hi ranova This video will show you how to remove the panel and this one will show you how to remove the center console trim

I finally got around to finishing this. I had tried 2 weekends ago and was doing only the passenger side but couldn't fit the battery through, also ended up tweaking my shoulder so I gave up that attempt. I tried again today and opened it from the driver side and it worked like a charm and just...

Thanks for all the info, hopefully I'll have some time this weekend to give a shot at this

Oh ok, I assume you need to remove some of the trim around the center console before removing that panel? Also are there any retention clips that I need to be aware of? Thanks again.

Hi @K-MTG, I'm thinking about putting my B-124 under the center console as well and adding a relay switch to toggle the dashcam on and off, do you have some more pics or instructions on removing the paneling around the center console to get to that bottom area?