Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Search results

  1. J

    Manual firmware update (for new charge port)

    Which port did yiu use to connect to car? On driver side or unplugged autopilot behind glovebox? .103 is autopilot IP. If you connect via other port, you may be causing IP conflict.
  2. J

    Manual firmware update (for new charge port)

    The issue is you have subnet mask 255.255.255.255. Do NOT use DHCP (What's the point?). Use manual address and set subnet mask as seen in @mmccord screenshot: 255.255.255.0
  3. J

    Manual firmware update (for new charge port)

    @iamhtoo as per https://data.hackinn.com/ppt/BlackHat-USA-2018/us-18-Liu-Over-The-Air-How-We-Remotely-Compromised-The-Gateway-Bcm-And-Autopilot-Ecus-Of-Tesla-Cars-wp.pdf (page 8) The command port supports many commands, such as install, auth, system, gostaged and m3-factory-deploy. Some...
  4. J

    Manual firmware update (for new charge port)

    This one.
  5. J

    Manual firmware update (for new charge port)

    Europe. But after plugging in city charger, then home charger works without warnings and chargee port pulses green :) Tesla really likes restarting, connecting /disconnecting, retries and whatnot.
  6. J

    Manual firmware update (for new charge port)

    Alright, I have issie with my home charger. Itncharges at 48kmh, but says limited charging. Tried another charger, no issues. Was at 24A 66kmh and no warnings. Thanks again.
  7. J

    Manual firmware update (for new charge port)

    Hey, progress! Had to unplug and reconnect charging port while Tesla is on. Now it unlocks and charges! Albeit limited charging, saying charge cable may not be inserted correctly. km per hour climbs up slowly. Now at 23kmh (slow) on 3phase power line. Will have to see if charger issues or...
  8. J

    Manual firmware update (for new charge port)

    Failed. Reason= gateway_failure. See image.
  9. J

    Manual firmware update (for new charge port)

    > A e you able to open and unlock the charge port from the MCU screen by clicking the charge icon? Port canbe opened/closed, yes. Screen shows "Charge Port Open" - so communication happens. But no, port is not unlocked. If unlocked via physical emergency switch on the back, it shows RED...
  10. J

    Manual firmware update (for new charge port)

    Car is not plugged. We had some progress. 1. Restarted car with disconnecting battery. Charge port was disconnected. 2. Connected battery, car turned on. 3. Connected charge port. Tesla didnt say it will shutdown (it did when turning car on with port plugged in) 4. Launched update with...
  11. J

    Manual firmware update (for new charge port)

    I'm currently at home. As I understand, the Tesla has shutdown before update even started. Unplugging charger port returns things to normal - car won't shutdown. I will have to retry that tomorrow - it is exactly midnight in Latvia. By the way, do you happen to know command that will reset all...
  12. J

    Manual firmware update (for new charge port)

    kdday. Managed to connect to that port. Verified with wireshark that broadcast packets come in from 192.168.90.100. Was able to telnet into 192.168.90.100 25956 and issue factory-redeploy, at same time conmnnected cable back to AP Screen turned blue. Then screen turned off and went black...
  13. J

    Manual firmware update (for new charge port)

    Didn't hope of that fast and precise reply. Thanks. Will see if i'll wait for that cable or patch my own.
  14. J

    Manual firmware update (for new charge port)

    Bought brand new charge port for P100D year 2017. Part number: 1061353-00-F. The old one is mechanically damaged, albeit charging works but in limited mode. When charge port physically changed: The car says "Software upgrade required". Port will not unlock Doesn't charge if opened via...