Separate names with a comma.
I’m not sure my record. Yes, 11.4kWh. I installed in September 2019 and got 1,376 kWh for that month. And October 2019 was 1,613 kWh.
I took it down to 38 but try different pressures. You can feel the difference between 38 and 42 for example.
Where are you? I’m in San Diego and can reach that on some cloudy days. This is yesterday.
Where's the video?
That would be awesome! I'd download your software just for that.
How much data do you need?
I tried it with 245/35R20 PS4's that are at 90%. The back end barely broke loose and only for a few feet. I think I have to be more aggressive...
I measured and so far performance appears to be identical.
When you defeat traction control does it still mimic a limited slip differential?
Have they released the referral rims yet? I have been waiting for them.
It's been doing exceptionally well. Install went smooth, no delays. My friend did it as well and was raving about it last week.
Zero issues with rust and water holding. I'm OP and have had this setup prior to posting here.
Has anyone used this place and got favorable results?
I bent the rim on a brand new bmw 750 the day after I bought it. 163 South exiting University right lane. There's a huge pothole that's till...
I upped the size of my tires (245/35ZR20's on stock rims in this case) which upped the weight handling which theoretically allowed me to lower...
You’re right. It’s in the Beta version of the Stats App and should be released soon.
Stats App has this if you have an iPhone.
Will it match the stock grey rims?
P3D+ 20" stock performance rims
Micheline Pilot Sport 4S
245/35 ZR 20
These are 10mm wider that stock.
Add you names to this spreadsheet: teslamotorsclub tesla model 3 20" gray/sillver wheel swap
Has anyone figured out what they did? I'd modify my car to be quieter if possible.
Regarding Tire Pressure. I dont know how this effects longevity but running these 245/35R20 XL's at 41 is too high. I brought them down to 38...
Finally replaced by tires with 245/35R20's on the stock Performance 20" rims. Here are some pics: I did, see this thread: 245/35/20 on oem 20” wheels?
I did, see this thread: 245/35/20 on oem 20” wheels?
10mm wider. Split that in half since the tire stretches on both sides and you'll only see a 5mm difference on the lip. The 35 in 235/35 is a...
My logic is a bit different. I look at the weight handling vs stock and then make a determination of where the tire pressure needs to be.
It's barely noticeable. One thing I did notice is I'm able to take the car through more extremes. I'm thinking about installing the UP sway bars...
Check these pictures. Michelin Pilot Sport 4S 245/35R20's on the OEM 20" Performance rims. Basically it is perfect--as long as you are okay with a...
There was not enough gap on mine earlier, I had to force it for a few months. After a few months it seems to have gapped there.
Here's a photo.
This is what I do. It works great.
I purchased Michelin Pilot Sport PS4 245/35R20's for my P3D. I'll get them installed on Tuesday. I would have gone with 255's but I'm not sure...
I'd do this without the tint if they also hooked into the dimmer.
I have a stock P3D+ and want a little more stability around corners, especially in the rear. I plan to do Unplug's Front and Rear sway bars. Any...
I need to do the same but will likely upsize my tires and get the 245/35R20's. Though I'm so close to trying 265/30R20's on the stock rims. On...
This thread is about the stock 20" Performance rims.
Can anyone confirm if 265/30R20 will fit? On paper it appears it would. I'm .5" away from the knuckle with the 235/35R20. (This is on stock...
It's harder to mask random noises when there is no engine noise. Have you ever opened the hood of a gas car and rev'd the engine on the same...
I am ready to replace my 235/35R20 tires on the P3D+ OEM Stock 20" Rims. I love the Pilot Sport 4S, so tire brand/model is settled.... Now just...
Just a reminder: Add yourself to the list if you want to swap. WE NEED MORE GREY RIMS! :)
teslamotorsclub tesla model 3 20" gray/sillver wheel swap
X Performance Raven July 2019 build... Everything seems normal.
What cutter do you need?
I wouldn't go wider than 255 or you may hit the knuckle near the top inside.
oLatest release for me shows improvement. The Come To Me does a better job of stopping the car closer and more in line with the direction I want...
I'm planning on going with 255/35 20's very soon. If you've got pics, please post. :)
You could also use a third party app. For example, I drive the 3 so my Tesla app is always on the 3. The X is on Stats. (Most of the time.)
No updates yet... West Coast P3D and X Raven Performance both with FSD. Like @lebinc said, small batch of random cars first, will likely see this...
I added you to the list, someone else on Dallas will trade you. See here: teslamotorsclub tesla model 3 20" gray/sillver wheel swap
What do you say we start a list!
Fill out this form. The idea is to put the major city you are next to so that someone else can browse the list...
This sounds like a great idea because less noise will also hit the frame. Instead of dealing with the noise later on you're dealing with the...
Also HW3 ... no problems.