Separate names with a comma.
Are you running OEM footwell lights? If you’re using abstract ocean or upgraded LEDs, maybe it’s too much. The foot wells are very sensitive.
That actually looks really good on the grey wheels!
Midnight silver metallic with matte PPF right? I don’t think they make colored PPF?
Thanks for follow up. Good call on Katzkin to make it right for you.
Interested in purchasing the light if still available. PM’ed!
WOW! Looks amazing.
Very helpful post. Thanks for the write up. Out of curiosity, did you consider Titan 7 T-S5? Similar style to the VS08.
take off the door panels and secure everything behind there with tape. I had a similar noise in the front passenger door. The place where the...
Interested but aren't original, new tires 9/32?
The fitment looks on point. Do the screws go into factory holes or you had to drill into the bumper?
Do you have one without blue tint but still has defroster?
Does Reus run power to the 12v battery in the front? Any issues so far with 12v system?
Interested in how these compare to MPP....
Signature Glass does good work, but their ceramic film has a brown-ish tint. If you're picky about the shade of tint, then I suggest getting a...
You have FSD I'm assuming?
yes, my page is exactly the same as the screenshot above stating the 4.4 to 3.9. 2019 p3d+
content: "Improve your 0-60 mph acceleration from 4.4 seconds to 3.9 seconds with an over-the-air update."
content: "Forbedr din acceleration fra...
Thanks for the screenshot, made it easy to find. My P3D+ source looks exactly the same as your screenshot.
What page did you find this on?
checked source- no mention of that
for what it's worth, my P3D+ w/o FSD mentions the 2k acceleration boost under upgrades in my account
Awesome, let us know how it goes. Interested in doing this as well. Are you getting the foot sensor as well?
Haven't used them but I heard calibred customs does it
Y if you need a do-it-all car. Like you said, first MY cars will probably have issues. IMO 3 looks better but not as practical.
How much for full vehicle PPF on a model 3?
9/2019 build had this issue. fixed thanks to
Thanks for the tip! I just adjusted my fender using your method and it is perfect now. 10mm bolt was exactly right. Took less than 5 minutes. No...
please dm me pricing on 20" monoblock for m3p
Sounds like a relatively easy fix. Might try it myself. How do you access the bolt you mentioned? Take out wheel well liner?
FS: Model X All-Weather Floor Mats 7 seater
Trunk (large floor mat for use when 3rd row down)
3rd row floor mat
2nd row floor mat
8/31 order black/black p3d+, vin in source today 9/20
Out of curiosity, what ended up happening? Did Xpel warranty this? Thinking of getting full body xpel
Do you work for TapTes?
That is a good deal. They usually have a bunch of teslas in the shop so you can take a look at their work.
I got my XPEL at protective film solutions in costa mesa. quality was pretty good. got XPEL tint as well. i think extreme autowerks is one of the...
I found that leaving it in the garage and using the app to check status (effectively waking up the car) often causes these issues. Were you able...
My car spent a significant amount of time in service for this issue. It would go off at night in my garage for no reason several times. Did alot...
Thinking of doing that... the gap between the front door and falcon wing is pretty big. I can almost see the stickers on the pillar. Only concern...
I recommend looking into the panel where the trunk close button is. I had rattles similar to others and finally found that the clips holding that...
I think in 4 years it'll be mid to low 50% range. As a reference, another thread for X leases at launch looked like this for 36 months:
curious about this as well.
Hmmm... service advisor told me about that "fix" for rattles but mobile ranger said that is a drain for water. Anyone know what the true story is?
Impressive looks clean! Looking forward to your write up
looks good, also interested how you wired power to this
Costa Mesa SC is crazy busy. Their center is way too small and understaffed. Unfortunately, from my experience, if you want an update it would...
My service advisor said that the rectangular plastic piece on the liftgate above the latch has been a source of rattles for people. I taped mine...
My car rattles and squeaks in a lot of places mostly front a pillars, rear liftgate, joints of falcon wing doors. Going to get an audio upgrade...
I've been to both Buena Park and Costa Mesa SC... I would say management/team at Costa Mesa is better.
That's crazy! Which service center is this? Really surprised they are doing this especially since your car is basically brand new.