Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Search results

  1. kev1n

    Tesla Model 3 MPP Upper Control Arms

    thanks, i thought i posted it under parts
  2. kev1n

    Tesla Model 3 MPP Upper Control Arms

    MPP Corkscrew Model 3 Front Upper Control Arms Front Camber arms used for 3k miles, comes with everything in the photo $1000
  3. kev1n

    INGENEXT BONUS MODULE - FOR TESLA MODEL 3

    I have the following bonus module for sale, comes with these features. check out their site for the full description. $400 https://ingenext.ca/products/bonus-module-tm3 BONUS FEATURES The Bonus Module gives you access to a lot of cool features on your Tesla Model 3. It doesn't improve...
  4. kev1n

    Blackvue DR900S with Blendmount vs TeslaCam

    I have a friend that mounted his on the bottom center. the view is decent but not great. there really isnt anywhere to mount it on the rear without it being noticeable. on my model s, i had it mounted at the top (same as @whitex)
  5. kev1n

    Blackvue DR900S with Blendmount vs TeslaCam

    i currently only have the front installed but it is dual ch. i never really tested the drain. according to my stats app, my cars total phantom drain is 50 miles/month. if you have any number to compare it to? i would recommend getting one, the quality and wide view beats teslacam by far
  6. kev1n

    Blackvue DR900S with Blendmount vs TeslaCam

    see my first original post for the view. you do see some of the dash but you get a lot of the left and right side which is important to me
  7. kev1n

    Blackvue DR900S with Blendmount vs TeslaCam

    some pictures of the mount and how its mounted
  8. kev1n

    RX350 Retrofit kit for Pre-Facelift Model S

    great for anyone looking to upgrade the existing low beams
  9. kev1n

    RX350 Retrofit kit for Pre-Facelift Model S

    RX350 is one of the best in terms of projectors. if you are going through the hassle of taking the head lights apart already. i dont think having to drill 2 extra holes is much more work
  10. kev1n

    RX350 Retrofit kit for Pre-Facelift Model S

    iirc, 2 holes line up, you will have to drill 2 additional ones
  11. kev1n

    RX350 Retrofit kit for Pre-Facelift Model S

    RX350 low beam projector with mini H1 shield and polished OEM clear lens OSRAM CBB low beam bulbs new Morimoto D1S to D2S igniter adapter new $500 obo for the above (headlights will cost extra if you want them) I also have OEM Headlights, they have XPEL Ultimate Plus PPF on them since the car...
  12. kev1n

    BRIXTON FORGED RF7 TESLA MODEL 3

    satin black
  13. kev1n

    BRIXTON FORGED RF7 TESLA MODEL 3

    my guess would be no as both front bumpers have different shape, the Y is more rounded but you can check with UP
  14. kev1n

    Pricing My 2018 Model 3 Performance

    nope, it use to be an option to buy with/without AP
  15. kev1n

    Model S suspension type

    yes
  16. kev1n

    M3P Spacer Question

    if you are running this on stock wheels, i dont see whats the point of adding 8mm. it is still going to look roughly the same the difference between P and non-P 3 is about 3mm, your 8mm will be like adding a 5mm to a non-P 3
  17. kev1n

    Refreshed S Now Has Smaller Battery Pack Capacity - Reduced ~104kWh to 100kWh

    there is a reason why they went away with the numeric naming structure. they have been about reducing costs so this shouldnt be a surprise
  18. kev1n

    Dry Carbon Fiber Vinyl that matches OEM trim/spoiler

    reviving my old thread.. has anything better come on to the market now after 3 years? haha
  19. kev1n

    Model S Aftermarket Wheel Fitment/Offset Discussion

    no issues with fitting but you should read my comments above i made in a previous reply why people are afraid/shops dont recommend it you're measuring it backwards, a +22 will sit more outward than OEM, you're adding 22mm, not subtracting it
  20. kev1n

    Model S Aftermarket Wheel Fitment/Offset Discussion

    you cannot see clearly in pictures. most people go with a conservative front because if you dont know what you are doing, its possible to damage your fenders. example: if you are lowered and go up a drive way and you turn your wheel, it will smack your fender you have to watch out for the x10...
  21. kev1n

    Model S Aftermarket Wheel Fitment/Offset Discussion

    20x10 +30 on 255/35/20 front and rear if you run a 9 in front, you will want to be around +20 offset or it will look sunken in you can run a wider rear with higher offset as well
  22. kev1n

    sparks while tapping into 12v

    yes for your safety, the HV is connected to 12V
  23. kev1n

    sparks while tapping into 12v

    did you disengage the HV battery from under the passenger rear seat?
  24. kev1n

    Another subwoofer option - NVX Audio

    i saw that post, mine was not shifted out of place(already tried adjusting it and flipping the bracket around). my guess is they shipped it with the wrong bracket. their customer support seems like total crap. emailed them twice already with no response at all so i decided to bend/drill a new...
  25. kev1n

    Another subwoofer option - NVX Audio

    anyone else have an issue with the bracket that attaches the sub to the car? mine was way off, had to drill a new hole and bend the bracket to make it fit..
  26. kev1n

    Model 3 Performance Changes [in suspension and tires]

    you may want to consider the SR/LR if comfort is your concern.
  27. kev1n

    2012-2016 Model S Pre-Facelift Headlight RX350 Retrofit

    I have the following project that was never finished, looking to see if anyone would want to pick up the project or I can finish it if I can get a buyer. Ideally looking for a local buyer, located in San Francisco Bay Area RX350 low beam projector with mini H1 shield and polished OEM clear...
  28. kev1n

    Another subwoofer option - NVX Audio

    has anyone tried to source out a Y harness for the amp instead of tapping it?
  29. kev1n

    BRIXTON FORGED RF7 TESLA MODEL 3

    still for sale
  30. kev1n

    In-car Hotspot?

    correct
  31. kev1n

    PPF job after picking up

    depends how much you paid. you really get what you pay for the trunk can be done in one piece from an experienced shop all those ugly edges/corners can be better
  32. kev1n

    BRIXTON FORGED RF7 TESLA MODEL 3

    $3600 obo
  33. kev1n

    Unplugged Performance Super Performance Springs Tesla Model 3

    they came off my performance model
  34. kev1n

    MY Old Console VS New Console

    the old console is better, the whole wireless charging pad looks out of place. its usefulness is debatable and i believe its more of a gimmick than function because with all the new smart phones out these days, they last a full day or more. i never charge my phone in the car and would prefer to...
  35. kev1n

    Unplugged Performance Super Performance Springs Tesla Model 3

    the model 3 i bought came with them so i have no idea how it feels compared to stock. i went air so these are for sale. feels like other lowered cars ive had in the past. there were no noises.
  36. kev1n

    BRIXTON FORGED RF7 TESLA MODEL 3

    will entertain local offers

About Us

Formed in 2006, Tesla Motors Club (TMC) was the first independent online Tesla community. Today it remains the largest and most dynamic community of Tesla enthusiasts. Learn more.

Do you value your experience at TMC? Consider becoming a Supporting Member of Tesla Motors Club. As a thank you for your contribution, you'll get nearly no ads in the Community and Groups sections. Additional perks are available depending on the level of contribution. Please visit the Account Upgrades page for more details.


SUPPORT TMC
Top