Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register

Search results

  1. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Of course! 😅 Just happened to have a local client with an Ultra Red who wanted to do spacers for the time being, so it was an opportunity for some side by side shots. -Danny
  2. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    I've had many different suspension setups on many different cars in my past... but trust me when I tell you, this car's adaptive dampers pairs so impressively with lowering springs. The suspension feels like OEM in both "standard" and "sport" mode. I believe many will be happy to hear this...
  3. MODEL+

    Aftermarket Wheels on Model 3

    I definitely will now that it's lowered. Your camber is nice and even, which is nice to see. Thanks for the chart - I may possibly be wrong about the F/R camber differences this time around. -Danny
  4. MODEL+

    Aftermarket Wheels on Model 3

    Although, we haven't tossed our car on the alignment rack yet, I'm pretty certain the rear is running more negative camber than the front. Aside from the obvious new springs / strut change to the new car, I believe the other components are carried over from previous. Typically this rear negative...
  5. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    It's Matte (non-glossy). -Danny
  6. MODEL+

    Aftermarket Wheels on Model 3

    Love the Advan GT's! The orange hub ring and FN lugs is a nice touch too. Details, details. 👏 -Danny
  7. MODEL+

    Aftermarket Wheels on Model 3

    That is correct. Highland M3P now comes with 20x9 +34 / 20x10 +45 on 235/275 setup. I believe this is to accommodate the now more powerful rear motor. And let's be honest, 235 all-around on these cars is way under-tire'd. That was mainly chosen to maximize range over putting power down and...
  8. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Yes, of course! Here you go: Lowering Springs + Spacer Kit available here: https://modelplusstudio.com/blogs/journal/model-3-performance-highland-spacers-14-17mm-on-tesla-factory-20-warp-wheels-lowered Thanks, Danny
  9. MODEL+

    Spacers for new Model 3 Performance

    Hello, Yes, we do! Will require lowering to gain natural negative camber. https://modelplusstudio.com/blogs/journal/model-3-performance-highland-spacers-14-17mm-on-tesla-factory-20-warp-wheels-lowered -Danny
  10. MODEL+

    Vendor 19-20" Volk Racing TE37 (Plug & Play) - RAYS Authorized Dealer

    Any 60 degree taper lug nuts will fit. Here is our selection of aftermarket lug nuts that will play well with Tesla's. Regards, Danny
  11. MODEL+

    Aftermarket Wheels on Model 3

    The primary factory for the rear to be less flush than the front is due to the rear having more static negative camber from factory. If this is a matter of OCD for all corners to be the equal flushness then I suggest installing adjustable rear camber arms to match the camber to the front. This...
  12. MODEL+

    Aftermarket Wheels on Model 3

    Matte to go with the trim. Photographs terribly but slick in-person. Agreed. And this is top of the line finishing too! The gloss black that RAYS uses is more like a piano finish with a lot of depth. Should fit like Gen.1 M3P without issues. We will validate it this weekend with these: -Danny
  13. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Wow!! 😱 stunning. -Danny
  14. MODEL+

    Model S Aftermarket Wheel Fitment/Offset Discussion

    255 on 10.5" wide is considered very stretched. I personally don't recommend it. -Danny
  15. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    That rear 3/4 view is everything! Pic from today to stay on topic: -Danny
  16. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    There is no additional R&D. They're simply springs carried over from previous M3P. They just happened to pair really well with the new adaptive Bilstein dampers on Highland M3P. Feel free to message me. Let's work something out! Thanks, Danny
  17. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    The gas-lighting in this thread is wild! 🤪 -Danny
  18. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Are you saying I'm not low enough? 🤪 -Danny
  19. MODEL+

    Vendor Tesla Model 3 Highland - Fitment Gallery - System Motorsports

    This may be the first performance highland on TE's! Looks great👏 Thanks for your support. -Danny
  20. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Thanks! I'm sure you know, but stance is everything. AST 40mm lowering springs flushed out with H&R spacers. I'm going to put together a kit on the website soon. This setup is perfect for those who wants a tidy OEM+ setup. Oh and lowering springs pair extremely well with the adaptive dampers...
  21. MODEL+

    Model 3 Performance/Ludicrous Waiting Room

    She went under the knife this weekend 😊. -Danny
  22. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    She went under the knife this weekend. 😊 -Danny
  23. MODEL+

    Vendor Volk Racing / Gram Lights / ADVAN Racing Wheels - Authorized Dealer

    Thank you for your kind words and support @TCHC ! Car looks great. Enjoy the wheels, knowing you're one of the few with a set of 57DR's in special Admiral Blue! Regards, Danny
  24. MODEL+

    Model 3 Performance/Ludicrous Waiting Room

    Stock suspension is pretty soft and floaty tbh. But suspension feel is totally a subjective and relative matter. -Danny
  25. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    That's sharp man! -Danny
  26. MODEL+

    Model S Aftermarket Wheel Fitment/Offset Discussion

    Yes, they will fit. 20" is the largest diameter RAYS makes them. Message me when you're ready for a set! Thanks, Danny
  27. MODEL+

    Best Aggressive Wheel Offsets?

    No spacers and get a set of after wheels that fits flush. This is coming from someone who sells spacers… The common issue is not all aftermarket wheels will have deep enough pockets on the backpad to support those bolt-on style spacers. -Danny
  28. MODEL+

    Model 3 Performance/Ludicrous Waiting Room

    Unless I get the exact same tires and collect enough mileage on both setups, there’s no way to tell for certain. My guess is range will decrease slightly since you’re still gaining 40mm in total contact patch. But I’m talking marginal differences. Worthy trade-off to increased front end grip...
  29. MODEL+

    Model 3 Performance/Ludicrous Waiting Room

    Ding ding ding! The front end grip is much improved now with a 265 front (albeit way sticker compound). Braking performance as well! For efficiency, I would do a 235 on 18x8.5 setup to lower rolling resistance. -Danny
  30. MODEL+

    Vendor BC Forged - Fully Forged Lightweight Wheels / Bespoke P&P / Quick Build TImes / MANY Designs - Authorized Dealer

    I like the way you think. We've spec'd a few sets like that for MSP. Now I'm visualizing what color option would be best against that new Lunar Silver 🤔 -Danny
  31. MODEL+

    Model 3 Performance/Ludicrous Waiting Room

    265/35/19 Bridgestone RE-71RS. We chose this aggressive 200TW summer tire primarily for autocross / track use. Street setups can use Michelin PS4S in the same sizing. Side by side - 235 / 265 / 275 Perfectly flush even without lowering the car! -Danny
  32. MODEL+

    Model 3 Performance/Ludicrous Waiting Room

    Yes, of course. 18-20" - Satin Black, Anthracite, Brushed Clear, and Motorsport Gold. -Danny
  33. MODEL+

    Model 3 Performance/Ludicrous Waiting Room

    Staggered 20" --> Square 19" - Fully Forged + Weight Savings Regards, Danny
  34. MODEL+

    Vendor APEX VS-5RS & SM-10RS - The LIGHTEST Plug & Play Fully-Forged Wheels for Tesla - Authorized Dealer

    Motorsport Gold APEX VS-5RS on our Ultra Red 2024 Model 3 Performance (Highland) Factory Wheels + Tires Weight 20x9 - 235/35/20 - 48.8lbs 20x10 - 275/30/20 - 53.4lbs APEX VS-5RS + Bridgestone RE-71RS Weight 19x9.5 - 265/35/19 - 48lbs Resulting in unpsrung weight savings front and rear...
  35. MODEL+

    Aftermarket Wheels on Model 3

    Yes. We offer direct plug and play spec - 18x9.5 +27. -Danny
  36. MODEL+

    Vendor BC Forged - Fully Forged Lightweight Wheels / Bespoke P&P / Quick Build TImes / MANY Designs - Authorized Dealer

    Can you see the new KL51? It shares some design features as KL01 (Rim flange and I-Beam spokes scalloping.) -Danny
  37. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Sneak peak via GOLDEN hour today. 🌄 -Danny
  38. MODEL+

    Vendor BC Forged - Fully Forged Lightweight Wheels / Bespoke P&P / Quick Build TImes / MANY Designs - Authorized Dealer

    Congrats and great choice! 👏 If Luna Silver was available for new M3P, I would've chosen that as well. Let me know when you're ready for a set of BC's. It takes 3-4 weeks, but you already know the drill by now. ☺️ Thanks, Danny
  39. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    I don't know why, but the blue HITS on this new M3P! -Danny
  40. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Yup! Tinted 18% now. -Danny
  41. MODEL+

    Vendor BC Forged - Fully Forged Lightweight Wheels / Bespoke P&P / Quick Build TImes / MANY Designs - Authorized Dealer

    That's correct! OEM tires carry-over setup. Many inquires for this setup. Did you take delivery of your new M3P?! -Danny
  42. MODEL+

    Model S Aftermarket Wheel Fitment/Offset Discussion

    21" BC Forged EH185 completed for our client's 2023 Model S Plaid in Dublin, CA. 21x10.5 Square Fitment / Gloss Brushed Black / Deepest Concave Mounted with 295/30/21's all-around! Complexity in design, simplicity in execution...
  43. MODEL+

    Vendor BC Forged - Fully Forged Lightweight Wheels / Bespoke P&P / Quick Build TImes / MANY Designs - Authorized Dealer

    Follow-up for this set mounted with 295/30/21's all-around! Complexity in design, simplicity in execution. https://modelplusstudio.com/products/bc-forged-bespoke-wheel-program?variant=43470734590126 We can build these for any Tesla applications in a variety of color combinations. BC Forged...
  44. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    Yes, correct. -Danny
  45. MODEL+

    Show off your aftermarket Model X wheels...

    You should be fine running square 22x9.5 +45 on 265/35/22 all-around. We have clients on 21x10.5 +34 setups with no issues. You'll actually have 2mm more inner clearance on yours. Running hub-centric rings is totally fine. And agreed on material of the rings makes a big difference for removal...
  46. MODEL+

    Vendor Wheel Spacers / Lug Nuts / Hub-Centric Rings for Tesla

    Moderate Flush Kit for 2024 Model 3 Performance 5/14mm - Easy to install - Perfect for stock height. https://modelplusstudio.com/products/model-3-performance-uberturbine-wheels-spacer-kit?variant=43843706519726 Danny - [email protected]
  47. MODEL+

    Pic of your Model 3.......RIGHT NOW! [model 3 pictures thread]

    If nothing else, do 5/14mm spacer kit. Perfect OEM+ look -Danny