Separate names with a comma.
It is called "RUN A NEW SERVICE" to achieve a new 200 amp panel. Cannot imagine a 100 amp panel unless the house has not been upgraded since the...
NOT regret a second 200 amp panel.
Short answer: run another 200 amp feed in. You will regret it...JIMO.
No regrets...$134,500 plus about $11,000 in full wrap, interior and exterior Ceramic Pro. Not to mention the +9% state tax....wow, that is a lot...
Mine will be coming off and probably only be used to go into Canada. I am glad I have it, but like @RossRAllen am not totally convinced the...
I wanted the clean look of no frame. The less hanging on the front end the better.
OK...last week pulled over by Wa State Trooper in Lynnwood just as I entered the I-405 Southbound. Rolled down the right front window and sat...
Almost never. Just to show someone how it works. It is slower than getting in and moving it myself.
Unfortunately, although I have set the reverse tilt and hit "SAVE" at least five times it refuses to accept the reverse tilt change. Sigh
Yes...please let us know about the hex screw adjustment. My SC has it noted on my file, but they referred to the white lines on the display as...
I smell driver negligence...little more. Some things are explained by Occam's Razor.
When all else fails: READ THE MANUAL. Thanks
Interesting...will the reverse tilt setting get saved into my profile? It has been very embarrassing to not park straight.
@Birdcar...depending on time of day...maybe offer him a cup of coffee and ask him if he would be willing to discuss the criteria he uses when...
Mine has a similar problem. I have not been able to figure it out, but back up better using side mirrors which is difficult as I have the outside...
That is different, but still 20 minutes travel (to go both directions), 10 minutes to scope and discuss, and about $1.50 per mile for a truck plus...
My goodness we have a different set of values. $200 is not out of line for a registered and insured contractor. Factor in travel time to and...
@ericwol quote: This hyper alert stuff is bull crap. It seams like it an excuse to harass people. Seattle Police has a bad history of shooting...
Are you sure you should use the word "accused" which is judgmental and non-information gathering? Does not sound like typical police...
The unfortunate result of more airflow due to restrictions within the seat itself...would be more noise...and it is already noisy, at least to me.
Good news indeed. Now maybe Tesla will pay for it!?!? [The tinting]...otherwise, hey put in a new windshield.
Keeps you awake @Bwgan and eliminates boredom. Sigh
My MX P90D came in at $1700 per year. Higher than I thought it would be but the coverage is greater due to my exposure. You insure for what you...
Ah, but there is a state law in Washington State against unsecured loads...and strictly enforced. This is a long section: RCW 46.61.655 Dropping...
Oh gosh...there goes the Xpel and Ceramic Pro???? I hope not.
EXACTLY! I too can see the scratched area. Timing not great as I will have to do a semi-hurried road trip. Don't want to make it in my wife's...
Mine will make that noise when sitting in the garage waking up as the spoiler stretches and yawns, but becomes more pronounced when I hit 45 mph...
Received a note from Tesla SC rep that Tesla is aware of the issues: "I have put a note in your file regarding the windshield ghosting. Tesla is...
Should be coming mid July for a Veterans ceremony at the local VA.
Hey...it worked yesterday. Slightly more acceleration, but not enough to do it often.
All black...& carbon fiber interior.
Tip...it should be done where you live. Not a fan of shopping just on price. What if you have an issue or problem?
Hmmm have tried it three times on my non-Lud-P with no indication of 'LAUNCH MODE'. Not that I care a lot as there is so much instantaneous...
My new 90% has dropped to 226. Interestingly it did the 1:00 a.m. charge and then started up again at 2:00 a.m. to charge again. Hmmm....
@RossRAllen...the initial and replacement rivets were metal but not strong and almost all will fail in my opinion. The third try was a local...
The three tested pressure were on 1, 2 and 3 settings. It is an independent fan and not part of the AC.
K-MTG....that of course is a rhetorical question and probably not answerable by anyone other than the design team for that element of the X....
If the skin feels air movement, and evaporation from said skin occurs, cooling is the result and resulting perception. Obviously if there is a...
7.9 Pascals = 0.0317 WC". That is why HVAC engineers use Pascals as PSI is meaningless as it is too high a range and WC" is appropriate for more...
No, polarity will not change the direction of airflow. IMO. This is all DC electrical.
If someone can tell me how to change the "POLL" options, I will add it. I have never done a poll before.
Today I finally have my MX back and time to set up a digital manometer which measures in Pascals down to tenths of Pascals. I tested all three fan...
Can't see how to delete?....
OOps...
Today I finally have my MX back and time to set up a digital manometer which measures in Pascals down to tenths of Pascals. I tested all three...
No...did not know. I carry quite a few car detail items such as power adapters, tire repair kit, rags, cleaning tools ... so will have to move...
@Ross......I will be looking at it more closely tomorrow as there are some issues with the new seats. I will be meeting with a Tesla supplier of...
Yes, I got it again today but have learned to ignore it. Only once did it fail to start and I clicked the top of the FOB once and stepped on the...
Agree with @blu...etc. Seven is even high.
Beware of such inexpensive pricing. Even the high volume shops in Seattle using non-certified applicators charge almost double that price for...