Separate names with a comma.
Decided not to do the DIY thing and had Drawtite installed by my local independent Tesla guy in Toronto. He did a nice job getting the receptacle...
The kit from Hyperdip came with 5 cans which was enough to do six coats on four wheels with bit left over. Yes shadow black
Well we will see how well it holds up as Hyperdip is new. I plasti-dipped winter rims on my other car four years ago and they still look good...
Finally got my Drawtite delivered -was delayed a couple weeks. Going to take it to local shop to get installed. Curious if any of you attached the...
Thanks - we're super happy with it. Will likely do same for the winter tires.
Sharing pic of dipped 20” aero rims with Hyperdip shadow black dip. Took six coats but they turned out well with a very slight gloss. Prefer this...
Anybody able to source a mat for the rear cargo well?
i get a lot of dirt at bottom of FWD on both sides - when driving through snow/slush it is quite loud so was thinking of atleast adding a strip at...
I get some wind noise at highway speeds on the Model X particularly towards bottom of FWD. I saw this pretty cheap seal kit that gets rave...
Can anyone comment on difficulty of getting the bumper back on after removal? i've got my drawtite on route any any videos i have been able to...
Hi folks - looking at my wheel wheels and noticed two metal bolts with push on type washers that will need to be removed. Doesn’t look like these...
Yes if you are towing a trailer but if you are hanging a bike rack or hitch carrier it is only 120lbs
Hi Folks - i ordered the drawtite hitch since i need to support way more tongue weight for a cargo hitch carrier (transport 130lb outboard engine,...
Folks - awesome thread. I have been stressing after finding out Bosal can only do 120 lbs with a cargo hitch carrier. We use a cargo hitch carrier...
Closing loop on my camera issues. Took to SC and they diagnosed the passenger fender cam as faulty. Replaced cam and everything back to normal....
Had my car in for service to fix fender cam and asked them to change 12V battery as well. Funny enough last night the car slept and phantom drain...
I had a good experience this morning - i went back to previous SC appointment and text thread i had with SC. Texted on that thread and within 20...
yes seems firmware related - i've got appt with SC on Friday to fix repeater cams - i will mention to them as well.
I have a few nagging issues some which I think can be solved remotely (I.e post MCU2 upgrade remote app unlock of doors not working - missing...
I got a reading of 13.55 - pleasantly surprised for a battery that is 3.5 years old and done 50k+ miles
I am wondering if recent temperate drop in Toronto area (very cold nights) is causing this. The garage stays above freezing but my last temp...
over 5GB uploaded by car overnight according to my UniFi wifi access point. That is a ton of data! i realize Tesla is collecting data to improve...
I will give it a go. But if you just look at voltage and 12V battery is being constantly charged by car, wouldn’t you get misleading results?
Will loop back after SC visit and let you know what the issue was. I may get some courage in meantime and pop one out to inspect and reconnect it:).
What statistics should one look for to determine if 12V is close to done? I saw a video showing that Internal Resistance was the key statistic vs...
Anybody know what to look for in terms of figuring out the health of 12V battery? Getting a ton of phantom drain so wondering if my 12V is about...
Thanks for sharing - hopefully I can get them to push a FW install before any next steps. In addition to all this phantom drain, I lost signal to...
One failed and then the other one went offline within a couple hours. So very bizarre! Maybe car wash related? do both cameras plug separately...
Hooked up Teslafi again overnight and did see some 15 minute sleeps followed by 45 min idles. The really interesting thing is checking my UniFi...
Yes very bizarre! I upgraded to MCU2/AP3 about 4 weeks ago. Note my rear camera and windshield cameras remain warm to touch while it fails to sleep.
Did 2020.48.30 fix it?
great thread on sleeping issues.. recently after 2020.48.30 my MX doesn't seem to want to sleep and phantom drain is up. I too had the MCU2/AP3...
Great question - anything is possible! Not sure I am DIY brave enough to check for rodent damage so may need to wait for mobile sc visit. That...
Anybody have their repeater cams die under the current 2020.48.30 FW - both of mine died shortly after FW upgrade (couple days) and day after...
Yes did that last night but earliest date I could get is Jan 22. I guess I have a regular ICE mobile now that I actually have to drive - lol....
Did the hard reboots today including removing 12V terminal. Still getting weird behaviour on this update including car not sleeping properly....
re: Firmware i suspect that too but i am getting zero camera feed off the fender cams - just spinning wheel of death. if it was being blinded,...
My passenger door is swinging out with some force and hitting garage wall (drywall) and then closing again. I assumed it would detect a wall and...
Quick update - so did the above reboot and also removed 12v battery connection which also did a reboot. I was mistaken - both fender cams are out...
Never mind - it fully rebooted - forcing FSD calibration so know it worked. That said two fender cams still missing so no dice here to get fender...
Weird - I removed it and computers still working?[ATTACH]
I went through touch less car wash and since both fender cameras offline. Started with one going offline and then the other. Hmmm
I believe I had it wrong - it appears to be the two side fender cams are missing - not the pillar came.
Very weird but both pillar cams now not showing in the dash cam video or while viewing video while parking.. blank with spinning logo. seems...
very helpful!! THANK YOU! If i remove the positive terminal, assuming this hard resets/reboots all the electronics/AP system etc?
Sweet trick! is this different/deeper rest from all the other reset procedures? (scroll buttons+brakes reset or power off in menus)?
Can the 12v battery terminal be disconnected without removing the Frunk liner etc? I saw the 12V battery change procedure on YouTube and it looked...
Awesome thread - i'm looking to do a deep reset of my MX after AP cameras and such have gone on fritz. In Model 3 forums, users were disconnected...
Saw some other model 3 users with similar camera drop outs. Many report a deep sleep will reset/correct the issues. Will see what happens over...
Was originally looking forward to the new firmware but ever since I loaded 2020.48.30 I have had a few gremlins a) Parking Brake warning error...