Separate names with a comma.
You should probably try replacing the factory screen protector with a new tempered glass one. That seems to do the trick as well. (At least for me).
I had Alan from EcoHitch Niagara install mine last year, you can contact him at 905 941 3899. He did a very good job and was able to finish the...
To open anything with a key card you have to unlock the car first (assuming you don't have the Tesla app set up on your phone to work as a key)....
Valid point for those who have a Smart watch (I do have an Apple Watch), but I never use it... not sure why I even bought it lol. Guess I never...
For me I use the key fob primarily when I need to open the frunk during winter.. much easier to do this rather than opening via app.
This has happened to us Model 3 owners back during fall of 2018 when we started to switch over to winter tires. This appears to be normal behavior...
You can have PDR done without film being removed. I've had it done twice on both the driver and passenger side front doors. They will be...
2.1k for the dent repair/three-stage paint. It will be extra for re-wrapping the three panels. Right now I have a full car wrap.
Lol, none since I paid off my car last year. There's paint damage after looking at it closely, so might not be DIY-able, probably wouldn't want...
Got quotes from 2.5k to 6k all from certified body shops. Lol..
Hmmm I see. From what I've been hearing from other people is that Tesla body shops usually just replace the damage panel rather than attempt...
Hey guys, Last night my dad managed to reverse park into my red Tesla model 3 and scratched the PPF and dented driver side fender and scuffed up...
Don't think fat32 is necessary anymore in the upcoming software update, exFat will be natively supported.
Mine hasn't changed even after the HW3 upgrade, has been 438~441km at 90% consistently.
Just picked up my car after getting it upgraded with HW3. Mine was basically like a factory reset, nothing really carried over. Also gotta turn...
My previous appointment was cancelled as well due to the part not being in stock for HW3. I have an appointment tomorrow morning to get HW3...
Or during a hit & run and your car manages to catch the front plate in your sentry mode footage.
It's $77 on Amazon....
Not sure if anyone has mentioned this, but we'd likely lose 1-person HOV access if everyone drove an EV :S
I don't agree with people saying enable NOAP at the beginning of the trip. I mean, why else allow you to enable/disable NOAP while driving?...
Yes, do it same day. Don't make the same mistake as me. When I brought it in my hood was riddled with small rock chips (after a few weeks!)....
I forgot my phone at home once, and only realized it after I already got to work... since I had my keyfob with me. :( Wouldn't have happened...
That's strange, we got our cars nearly the same time (mine being May 22nd, 2018), the ranger told me that my car is highlighted on the list to be...
Have an appointment at the Oakville Center on the Feb 25th as well for HW3 installation. Have the 2018 LR RWD M3. The person who will supposedly...
I get the very same message very frequently now as well. Very rarely did it happen before. Not sure exactly which FW version it began to sprout up...
I've preheated every single time I've had this issue happen. Were you able to remove the vapour barrier, or the mobile service tech had to do it?...
https://www.amazon.ca/gp/product/B014W3D1OC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Was in one of my earlier posts.
Got the voltage reading fixed thank you for the help! Also swapped one of the other meter to be on a different circuit, since the dryer wasn’t...
Hey all, I've recently had both my b-pillars cameras replaced due to condensation happening on the glass inside on the b-pillar where the...
Awesome, will probably look into that today. Will also be swapping the one of the meters off the dryer circuit, since the usage for that is...
Haha, that works :)
It is already around the black wire, not the red wire. Do you mean to move the neutral wire connected from the meter, into the breaker where the...
I wired them like this: 1.CT Sensor cables on the first two pins on the device 2. Black wire from the car charger wired through the CT Sensor 3....
From left to right: 1. Dryer 2. Washer (& a bunch of other stuff hooked up to this circuit) 3. Furnace 4. HPWC
So my setup right now should be fine as it is, and should measure accurately?
Yes, only one (miniITX build) that is on 24/7 as my personal home server, very minimal power consumption. It was always on in my rental place as...
[ATTACH] Just got the meters hooked up today.
Yeah, I use the new scheduled departure feature, and that feature automatically adjusts amperage too, from what I can tell, it doesn't always use...
It's very sporadic, I can't pinpoint what's causing it other than the obvious EV charging, have it scheduled charging through the car interface...
Also, got a few of these in today, going to hook these up to each circuit that I believe to be the culprits. (Furnace, Washer, Dryer, EV Charger).
Home is from early 70s, wiring is mostly from that same era... it's a gas water heater. I'm getting double that in a small house :( Yes,...
Would something like this work? https://www.amazon.ca/gp/product/B014W3D1OC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Got it... lol I'm just blind. Going to go over the data, thanks!
Doesn't look like it gives you the option to see an hourly breakdown. This is the closest I can get, which is just my usage per bill. [IMG]...
Yep, preheat every morning. But I charge at work too, so that shouldn't matter. I don't preheat when going back home. Would I have to purchase a...
Hi all, I live in a fairly small home (> 1500 sqft) and have noticed lately my electricity bill has been extremely high, 1991kwh for my last bill...
That's strange, I thought it defaulted to AUTO or ON when you shifted to drive, since I believe you couldn't change it while in drive, I may be...
I'm not sure if anyone's ever spotted this before, but last Friday I was driving back home on the 403 at around 7~8pm and spotted a Model 3 with...
Also brake lights, and turn signal indicators work even if MCU is not working or rebooting... (you just won't hear the clicking sound)
Not for mine, it passed ESA inspection..