Separate names with a comma.
Cobalt clocks in at $726 as well. Of course they say "never street drive on our pads" just like any other track pad manufacturer. Wonder how bad...
Because I have only been autocross! Started doing and track and immediately noticed issues...hence wanting to upgrade! Heard the same noise...
Did you ever get them for the front or just the rears?
Carbotechs are actually a little cheaper I think than those. I have been running the XT910 all around and they have been fine.
I had wanted the raybestos but yes pretty much unable to purchase. How do the cobalts/endless stack up against the carbotechs?
Unplugged pads are almost twice the price of carbotech (XP12/XP10). Do they actually perform worth the price? Any other pad the consensus for...
@MasterC17 what's the exact raybestos part number you recieved ? KNS isnt being forthcoming about availability and the pads seem to be gone from...
for the base, not the P3D. I've been asking their sales director over email, no stock
Would love to run the same but cant find any place that will sell them! KNS has no clue.
have you been able to fit a 285 wide tire on 18" or 19" wheels? (With camber arms / adjustable, highly negative camber, don't really care about a...
I have had the complete opposite, driving with crossclimate+ in blizzards in Tahoe with no difficulties or slips whatsoever (except of course a...
Nothing wrong with the material, just covid shortage onsupply
KNS reporting that Raybestos has no ETA on making more model 3apds due to material issues. Might end up with carbotech after all but going to try...
Wonder how sticky of a tire you would need to not be able to engage ABS with stock brakes. All the way to Hoosiers? 100 TW tire maybe. I could...
I was able to get about 3 track days at auto club speedway (infield, not roval) on my RE71Rs (265-35-18, ~-2.8 degrees of camber)
Anyone using quick jacks with a lowered car? if so, how lowered and how much clearance do you have? Website says <3.5 inches and I'm worried my...
Correct I'm mostly focused on dry racing. I don't care too much about 200 TW vs 100 TW, just not ready for slicks. Anyone else ran the AR-1 to...
So what kind of tires have people been using lately? Track burns through the RE71R for sure, looking at Nanking AR1 Hankook RS4 Federal RS595 RR...
Interestingthat ST47 is so aggressive yet very low on rotor wear by that chart. any idea why?
How's the rotor wear with ST43?
Anyone else have comments on the carbotechs? Waiting on KNS to get back to me on Raybestos
How low do you have the car? And what's the ET on those wheels to fit that fat! Curious on the tire too.
How much camber are people getting with MPP front arms? With a 1" drop from stock P3D my guys were only able to get -2.7 degrees I am running...
I'm runing RE71Rs, looking at Nanking AR1s in the future (eventually Hoosiers). What's the cost delta between these and Carbotechs?
I have been running XT910 since was mostly autocross focused, but geared the same complaints as you on the XT970 so was looking at carbotech....
how do they compare performance wise to the carbotechs?
When I installed them we had the shop (with an alignment) go back and forth a few times seeing how reliable it was. Toe was nailed within a few...
Heard good things about the carbotech compounds for track use, but which ones are people running? Choosing the Correct Compound – Carbotech Lots...
that's the great thing about the MPP corkscrew arm, the shims are repeatable enough where you can just align the marks on the tierods and get toe...
Any suggestions here on how to adjust the tierods with the MPP arms? To return toe to nominal after dropping in shims. not comfortable doing it...
Is a normal jack sufficient to get the car high enough to adjust the tierods? Looking to bring my toe back in line with the @MountainPass camber...
Learned that you cannot engage camp mode or sentry mode with a dying 12V Thankfully it didn't fully die (or rather it did, then after sulfur...
Got the "your 12V battery is dying" warnings, and the car actually didn't start a few times (lights flickering/refusing to have the screen go on)....
how has the Endless been holding up as a dedicated track pad that doesn't destroy the street too much? I also don't see EX90 on their website,...
Why so low on the regen?
@beastmode13 @MasterC17 did you both break the blue loctite and reapply? or simply bolt it back in without loctite. For the front seat bolt.
If it's got blue loctite is it really considered safe to take out and put back in? Unsure how critical it is for the safety of the seat.
Yea I was thinking needed to pop off the bolster panel to truly get access. Any trick there? Hah if I can just get the torq45 on the front seat...
forgot that. it's a 15mm for that one right? did you also have trouble with the torq bolt on the seat? the T45 or T50? I can't get it to move for...
The front seems to be a T45. But I just cant get it to break loose with my hand allen. Might need to get a T45 drill bit. Back but is just plain...
Also, finally got access to the front large torx bolt where it buckles too. Seems like it requires an inordinate amount of force to take off. Like...
Any tips to get the rear bolt off? Cant seem to get a wrench around it
And a real 9/16 crescent wrench not just an adjustable since that doesnt fit
The rear bolt is the one the rear seatbelt attaches too right? Not the one underneath Was able to get the front bolt more accessible but looks...
@beastmode13 did you have to bend the rear bracket on the schroth harness to have it come out at the correct angle? Also how to get access to the...
I'm assuming there aren't any 5 point harnesses you can install in a tesla without modifying the seats? Anyone with white seats experienced any...
but what makes it fit better than any of the other ones? or is that just what one person founds that fits so it's what we get. Unfortunate that...
Question, why is the BMW E90 the model to use?
Yea but the outside of my car has red highlights and I run red track wheels
Ah I see Main thing is that the webbing wont say Tesla model 3 though. Some tracks care about that. I actually asked schroth a while back and...