Separate names with a comma.
Links do not work. Caution advised?
I apologize for the "disagree", click was inadvertently done. Darn fat fingers!
Only one Roadster?
There are other differences between Gen 1 & 2 HPWCs. I have a Gen 1 for our ☰ and a Gen 2 for our Roadie. Both work flawlessly on 50A breakers....
Model 3 Owners manual Page 186
Waypoints would probably do the same but, what I am inquiring about is somehow changing the car's preferred route to one I would rather follow....
One question I have for those with the FSD beta (and I did not go through all 21 pages of this thread so I apologize if it's been asked...
Phasers or at least short range photon torpedos
@DerbyDave - this is a Roadster forum. We don't have no "Joe Mode".
Yup, HW3.
Just got this update. We haven't had chance to test it. [ATTACH] [ATTACH] [ATTACH]
I'm glad @markwj is picking this up. Let's see what you both find. Dumb question - could your JdeMo modification have any effect on this TPMS issue?
ok, my thoughts 1. Car can read temps from sensors. - yes 2. OVMS reads temps from sensors - yes 3. OVMS TPMS "read" command does NOT return...
It depends on how much you will use it and how much you want to spend. Fluke are real nice but if it's going to sit in the toolbox after being...
PM Sent! bob
@Roadster Your soldering looks ok to me but I would do continuity checks from the db9 pin#1 to the da26 pin#21, 20, & 22 just to make sure that...
Turn the key to the "on" position (so the instrument panel lights are on) and then try your read command. If it comes back with the same result, ....
Before soldering I noticed the surface of the OVMS module was "shiny" due to the clear surface applied to it. I took a very small piece of 330...
@markwj - We received the TPMS board last week and installed/configured it today. Our OVMS did require a jumper. Installation was fairly straight...
@nicky _cwt are there any other Roadster owners in Hong Kong that can assist you with replacing the connectors or the harness? The last time you...
@nicky _cwt, I continued to have issues with the fan side connectors so I just rebuilt the entire harness from the PEM to the fan connector....
Thanks Mark! It's up on Fasttech already. Looking forward to using this!! Thanks again to all who made this happen!!
the LCD will "fade" when left in the direct sunlight or heat but will return a little later. At least mine does.
Count us in & also let us know what the "donation" will be.
Last March (2019), we drove our 3 from Carson City, Nv. to Vero Beach, Fl and back (~6500 miles). We used evtripplanner, plugshare, and the car's...
Our little Roadie is alive & well! Just got back from her annual checkup. #1256
Steve - PM sent. From the service invoice: "Concern: The customer authorized diagnostic for date and time reset/malfunction Confirmed the...
They needed the Magnavolt theft deterrent system!
The tech did not mention any cost so my "assumption" would be there is a cost (especially on a ten or more year old car).
A couple of months ago we noticed the GPS issue with the time & date. It doesn't affect the operation of the car so we ignored it. Our Roadster is...
Looking forward to this! Thanks Mark and all who worked on this!
We had the original PPF on our car and it was beginning to yellow. Last summer/fall we had it replaced with Xpel Ultimate and ceramic. The...
Not flat matte, more like muted satin.
We put the CrossClimates+'s on our ☰ a couple of months ago (Costco) and have been pretty satisfied with them. With this virus thing we haven't...
@markwj Let me know what you find on @Rotarypower's car. Ours is doing the same thing. I will shoot you an email also.
The Heatshield we used on our 2005 Prius fits on our Model 3. Not perfectly but it works just fine for us.
Last March we drove from Carson City to southern Florida to visit my dad, about 6100 miles round trip. We planned out the trip, used the...
Had our 3.0 update done today in Reno, took about 2-2.5 hours. Lost our profile settings, Wifi, and Homelink but they were easy enough to set back...
We applied Dynamat to our Roadster a couple years back and have been happy with it. Dynamat
Does this still work?
I'll take some of that! We had both our Model 3 and our Roadster done with XPEL. We went with XPEL Stealth on our 3 and XPEL Ultimate Plus on our...
Sterling Silver with Stealth Xpel.
We replaced our pads and rotors with those from @titaniumdave because of the situation we had. Read about it here. We have been extremely happy...
Yes, stock 18" rims with Aeros. No issues putting them on and they stay on unless you hit a curb.
Long spade drill bit extension worked for us.
tuxmat from their website. Tuxmat on Amazon.
We have a 2.5 and began getting some 1144 errors. We verified that the fans were operating properly but continued getting the same errors. At the...
Range anxiety? Nope. In April, we did 6300 miles (Carson City, Nv to Vero Beach, Fla and back) using the Nav to find Superchargers and PlugShare...
Adams Polishes Waterless Wash is what we use on both our Roadster and our Model 3. Never had a problem with the product.