Separate names with a comma.
We got ours yesterday and they look great. Thank you so much for doing this!!
I recently had my dash apart and swapped in a single slot unit from pioneer with a large 8” screen. I’d say anyone with decent interior trim...
Thank you - that’s what happened for me as well. It seems indeed moisture related.
Sorry for reviving an old thread. My 1.5 just started producing error 19s (isolation warning). This happened after I had my roadster parked...
I'll take 2 as well
I'd be in for a group buy as well
I'm 6'5" and 250 lbs and drive my Roadster daily, around 50-100 miles per day (well, before the pandemic and working from home I did). Getting in...
Thank you for the correction! I looked at it pretty hard and in the end figured it would collide by more than that. Great to hear it worked out...
I installed the Pioneer DMH-WT7800 NEX recently. It’s similar to the Alpine Halo unit but has wireless car play, higher resolution, and I...
Got it - that would make sense. Still seems one of the lower CACs around - it appears there are a number of us (myself included) who are still in...
I'm surprised by the facts about the battery. They state the battery was "replaced by Tesla in May 2019", but that CAC is only 113Ah. Either...
to clarify - I fully agree and I modified both cables. I was just responding to the question how to handle the “downstream” part of modification....
That should work. What I did was get a new male DA26 connector and shell and replaced the molded end of the OBD2 cable. I can look up the past...
Your cable connects/ exposes can3 from the extension port (the 26 pin connector) to the OBD2 connector. The issue is, as @gregd points out, that...
@coolVariable I would be interested in one of possibly two of those. I don't have access to a 3D printer, but would love a way to prevent my...
this shouldn’t be too hard. Once you remove the dash and have the switch pack in front of you it’s easy to locate +12V, turn signal trigger, and...
Yes, indeed it was. And @MLAUTO was spot on - it appears to be gradual leakage. I had to top it off again in May, so it seems I’m losing about...
service.tesla.com There you can find the wiring diagrams (the harness, not the PCBs inside the components), service procedures, pin outs for...
Most of the body is carbon fiber (fenders, doors, hood, trunk lid, ...), the bumpers are regular plastic. Body panels are rather hard to come by -...
I'm considering a different (and uglier) work around - I already prepared a relay that is attached to the ext_pwr of the OVMS and hidden away in...
Yes, that's correct. However, now that I have done it once I'd say it's not a big deal. Just follow this thread: Dash Removal I could probably...
I had a switch pack issue myself for the last six months - hi beams would not work and I would get a “check bulb” error. Tested wiring ask the way...
it’s in the lowest position. Also, I had to pull it out to the extended position (towards the back of the car to clear the dash), and it is...
My 1.5 doesn’t have any of that. On my 2.5 (1171) there was plenty of goo - I think I read somewhere that the half circle vents on the 2.5 have a...
Here’s a couple pictures of the Pioneer head unit [ATTACH] I used an iDatalink unit to expose car vitals from the OVMS so they can be shown on...
Tex EV definitely takes the cake! FWIW, here's my recent tinkering Added a new head unit (single DIN on the 1.5): Pioneer DMH-WT7600NEX - 9"...
there’s small screw with a Phillips head. After talking that out I used a utility knife to separate the two halves of the key (on the long edge...
Hi Kay - I’ve had the exact same issue before. It turned out one of the buttons was dirty inside the key and not making good contact. I opened...
Bill - funny enough, I might say almost the same thing point for point about why I kept my 1961 Cadillac convertible (except for the handling...
To close the loop here: I checked fluid (normal) and all the connectors (unplugged, cleaned, replugged). The error kept showing up every time the...
Just submitted my down payment - really hope this comes together!
indeed!
I’m in. Please send me the information for the down payment etc.
John - I hope the repair holds up this time. in case in doesn’t, I’ve had good success with...
Thank you Mark and Greg - now I got it. The confusion for me is that the 26 pin connector on the OVMS is labeled DIAG as well. I'll stick with...
Mark - thank you foot the detailed explanation - I think I’m starting to understand what’s going on here. One thing has me confused: How can...
Mark - Thank you for the detailed note. I'm afraid I wasn't clear in my original post and have caused some confusion. Ultimately what I am...
... and a quick update re my obd2ecu issue: I managed to cut open and resolder my OVMS-to-OBD2 cable so that the can bus pins map to can2 on the...
Thank you - that explains it. In my case the car was on (as I sat in the driver's seat experimenting) and my battery might have been cool enough....
Yep - that's how I have it set up. The crash happens independent of what I have connected to the 26 pin port (nothing / short cable / short cable...
I finally got around this week to installing my OVMS v3.1 unit (Firmware 3.2.013) in my roadster (1.5) Everything is working fine - except...
Thank you @MLAUTO for the Opcom tool, how do you connect to the roadster? The DIAG port (where the OVMS sits) seems different from a regular...
Any ideas, please? How do I start narrowing down this error?
Afraid not. Pulling the ABS fuse produces a different warning (1098: DMC FW: Lost ABS Comms (and TC) warning). Replacing the fuse brings the...
I started getting this warning (1103: ABS Error) over the weekend, along with a red FAULT indicator and a flashing BRAKE indicator. Would welcome...
Dave - Did you ever find out what caused that ABS error message? I started replacing my head unit and now I'm getting the same error message. I...
I did that one last spring with my roadster - it’s an awesome drive!
Systems engineer here (Dipl Ing from Germany)
[ATTACH] Parking in the back yard
I used 3M panel bond: https://www.amazon.com/dp/B00KSF9TCW/ref=cm_sw_r_cp_tai_z4-lEbFPQA9AC']3M 08115 Panel Adhesive & 3M 08571 Manual Applicator...