Separate names with a comma.
It was working a few months ago. Maybe there's a CCS charger being installed and that's the one your dad went to? Once upon a time I had a...
There is a project on another thread here about using a raspberry PI zero to act as a "master" in the gen 2 HPWC units. The PIzero then connects...
The idea of shooting the whole CT with rhinoliner is intriguing. There's details like window seals though. Maybe only do it below the midline of...
You mean like the Honda Element had?
His evse was tripped and not working. I reset it, used for a while and left him ina better state than he had been.
I’ve called Loves about their new truck stop near Summerton SC on I-95 when they broke ground. I suggested they install a DCFC and explained that...
We've got one in my town where they lowered the speed limit from 55 to 45. They put the sign about 50 feet ahead of the GPS map marker. So my MY...
Yes, the voltage drop on extension cords is an issue... but the BIGGER issue is that of a loose/corroded / poor condition receptacle on your...
if you coiled one wire, yes you are correct. But with the extension cord there are two wires and the current "coming" and "going" cancel each...
HR departments have gotten lazy... or are they simply taking the easy route to avoid potential lawsuits? I'm being brutally honest here... Did...
No problem.... quick charge power makes a J1772 extension cord with a tesla plug on one end and J1772 on the other end. I can't find it on their...
I'm a little late to the thread.... the UMC (portable charger) that comes with your car will work great. Install a 14-50 plug on the wall i nyour...
Id like to offer a different perspective here... the electric outlets used in residential and commercial are not rated for thousands of plug in...
86-304 Disconnecting means (1) A separate disconnecting means for shall be provided for each installation of electric vehicle supply equipment...
I'm sure it will be configurable by the owner. As for the suggestion that non-tesla pay and tesla free, the whole billing scheme depends on the...
I'm running 2020.44.10.1 and my car started charging last night as soon as I plugged it in despite being set for departure mode at 530am. I can...
I hear on the news about a 2nd lockdown.... We are very close to curing the disease but killing the patient.
So now if you are lucky enough to escape the labyrinth known as Ikea, you still can't get out of the parking lot?
This is a very real possibility.
Turbeville also... tickets are the only source of revenue for that town. I-95 exit 135.
I must back pedal my assertion about the camera being active. I find that the car only asks about wiggling the steering wheel on long flat smooth...
I drive with a weight on the steering wheel. For the past 18 months my car has never said a peep about having to move the steering wheel until...
This may not be the right place for this thread but here goes.... I have two Gen 2 HPWC in my garage and one failed about 5 weeks ago. I...
An issue that I've always loathed.... well, too strong.... wished was better.... the speed limit of the car only starts to drop after the speed...
Looks like interior camera is in use on 2020.44.10.1
Glove box has pin code.... aside from that, sneaky pete holster goes with me just about everywhere. When I'm not wearing it, it is in the map...
Lowes and Homedepot sell "in use outlet covers" with a clear plastic dome over them. Also, you can buy a NEMA 14-50 outlet box like what RichAZ...
So I'm one of those weighted wheel guys.... driving this morning on AP and looked to the side to see a burned up truck at a rest area to my right....
I made a sticker inside my charge port that says "Need this plug, text me at 803 622 xxxx" .
yes, but who puts it in the Navi system.... no one can preheat a battery so I think the best supercharge rate so far is like 181kw.... COME ONE...
Hotshot trailers are 5th wheel... how will we do a 5th wheel with the sides raked like they are? I used sketchup to place a gooseneck horse...
the electrical specification plates on the chargers indicate max of 500v and 350amps... these are 150kw... but photos I've seen seem to show...
Chances are if you find an RV park, they'll have both the 30amp TT plug and the NEMA 14-50.... may as well use the 14-50. I guess this is why...
No... service centers do not have them. Tesla is pretty quick with shipping but friday is not going to happen.
You can create a "notify me when in stock" notice on the tesla store site.
Yeah, I'm that smart azz too.... roles reversed I would have said the same about you!! ha!
Hate to admit it, but with the addition of supercharger in Charleston SC, my interest in CCS adapter has diminshed.
There is a trailer light converter on ebay that connects to that gray plug... but it's $400... too high for my taste. I just used the Tekonsha...
Would you believe in South Carolina the laws says “closed container”? Hmmm my wife’s purse is a closed container.
I have a pistol in the map pocket of the driver door. Sometimes in the center console. But gotta ask... isn't the entire car a "lockable container"?
In sofar as the GFCI goes.... I’m confused about the code.... code says GFCI on everything with a plug these days, but the GFCI spec for EVSE is...
I know this is silly, and I'll probably decide it is too expensive for what I wanna do... I'm a ham radio guy and I want to put a clip on antenna...
I think I found it on the site you sent me to.... Tesla model 3 automatic frunk and trunk . You can buy a kit that has power struts or just the...
I wanted a Gen2 unit for current sharing with my existing Gen 2.... just had to wait for a gen 2 to come available in the tesla shop to get one....
I don't care about power trunk... I'm just looking for soft close. Does anyone know where a person can buy only the latching mechanism? My...
My mother's MY is slow to report one tire. I'll have to check with her but I think it is rear left. 2020.36.3 is her firmware.
I just got started in Tesla about 2 years ago..... EU requires all EVs to use the Type 2 CCS charger so Tesla was compelled by law to create the...
This device has a breaker inside rated at 10k amp interrupting rating. There's a lot of math involving the impedance of the feeder from the...
It holds up very very well... the other finish that was offered was "satin" which was basically buffed with a "green meanie" scotch brite pad....
I used to work for a Crown Ltd in Savannah GA and their specialty was hand polished stainless. Looked like a mirror. It occurs to me that...