Separate names with a comma.
Hi, I’m looking for the repair manual and service manual for the model 3. Can you still provide them? Regards, Roderick
Als dit kaartje 4G ondersteund zou het moeten werken.
Die externe simkaart houder zat al in de auto. Je kan trouwens ook een simkaart in de 4G module zetten. De externe simkaart houder is een extra...
Heb 2 jaar terug zelf de 4G/LTE module (Parrot) in de MCU gezet. Deze werkte plug&play met de externe simkaart houder en de originele simkaart die...
Thanx, found this allready, seems to be a little outdated. There are at least 3 new ecu’s not in this list...
Can the CID running a older firmware redeploy ecu’s running a newer version?
CID is working, tried factory-redeploy but get a failed message after 10 min each time.
Suspension is was not effected and is untouched. So no problems there. The problem is the 12volt dying during the update...
Hallo all, I decided to buy myself a S75D, it has front end damage with airbags deployed. I’ve come a long way fixing this car but now I’m in...
Did anyone find a solution for this air suspension problem? Thinking about buying another module are swapping them, would this work?
Did you try using another crash free module (with redeploy)?
Strange thing is that the airbag module is part 1031643-00-B, the others were all 00-A. Might be a little difference in clearing the hardcodes...
Have done this before and usually the SAS error disappears after the Airbag module has been cleared correctly. I now also have a car where is...
They did test it and according to Tesla the battery is fine. I asked about the voltage limitation and the response was the battery had passed all...
Is this the only error you are getting?
Got the official statement regarding the HV battery capacity test: “ Performed a HV battery CAC, capacity and range test, this succeeded all well...
I can confirm the range loss is real and not like Tesla is saying a better calculation.
Has anyone got his full range back since firmware 2019.20.2.1?
Brought the car in today at Tesla. Got the same excuse regarding the loss of range from the representative, I’ve not lost the range (51km), it’s...
[ATTACH] Down to 348km on a full charge, bringing the car to Tesla tomorrow. Lost 51km of range so far, I’m on firmware 2019.20.1 at this time....
I challenged this email and haven’t got any response since. (2 days ago) Waiting for my OBDLink to arrive so I can measure the voltage in the...
Got a response from Tesla via email, they basically told me all is fine. Put it through Google Translate... “ A new firmware was loaded on your...
Just for reference, now down to 355km. A total loss of 45km of full range in 4 weeks.
Today my 100% charge dropped to 359km. So I officially lost 40km in 1 month, or 10% of my range. 18% from new. Anyone else with these kind of...
I would happily trade with you.:) Since yesterday I’m down to 365 kilometers at a 100% charge. I now lost 35 kilometers in 3 weeks... Waiting for...
So the thing is that FW 2019.16.2 updated the BMS firmware to “protect” and “prolong” the battery life. A consequence from this is that some...
Today I’m down to 371 kilometers on a full charge. Tesla recommended discharging and charging it to full once more. So now I lost 28 km of full...
Thanks for the advise, the initial rating of this car was 270 miles or 435 kilometer. So the loss is much more then 2%. If the loss would be...
Lost 20km of max charging within 2 weeks on my S85D. At the 12th of May I was able to charge to 399km at 100% charge. 2 days ago the max charge...
Did anyone do a temperature reading with and without the heatsink housing on the board? Got mine installed with the casing and I used thermal...
Helaas heb ik ook een probleem met de eMMC van de MCU. Éen van de partities is moeilijk leesbaar geworden waardoor de auto eigenlijk geen firmware...
Typo, 192.169.90.100 is 192.168.90.100. I'm not allowed to edit posts.
Firmware on the car is 2018.50.6
I have been stuck at the same point. Set the ip manually to 192.168.90.103 Submask 255.255.255.0 Router 192.169.90.100 Wireshark records lots...
Same here
Do you also need Toolbox for swapping a MCU0 for MCU0?
Are you willing to share your software idea? Maybe via PM?
Been looking for this, thanks!
Thank you for letting us know. Do you happen to know if a firmware redeploy is required after replacing/swapping the liftgate module? I”m pretty...
Did you get the chance to check if it works with the sensors installed?