Search results

This marketplace listing has been re-listed.

This marketplace listing has expired and has been removed.

This thread is for the general discussion of the marketplace listing Wanted: 18" Aero Wheels or Photon Wheels (2021+). Please add to the discussion here.

I'l take the trunk storage bin if it's still available. Send me a PM

What year Model 3 did these come off of?

Bumping this up, now in Cedar Rapids, Iowa instead of Milwaukee, WI.

This marketplace listing has expired and has been removed.

If you are using the mobile connector for level 2 and the 14-50 you'll need a GFCI breaker. I have a 50A Homeline Square D for sale if you are interested. https://teslamotorsclub.com/tmc/marketplace/fs-square-d-homeline-hom250gfic-50-amp-2-pole-gfci-circuit-breaker.844/ However, as the OP of...

Can someone clear this up for me— If the wire I had wasn’t in Romex and was in MC to would be fine? The wire insulation is good to 90c, the romex sheath is the limiter at 60c which bumps down the amperage allowance in this case to 55a compared to 75a in MC?

price reduction and ready to ship!

Thanks Team, 50A installed and adjusted on the Wall Connector too.

50A Breaker it is. Thanks team

So the wire I bought is temp rated for 90 C, does that change anything above?

So I read a few things beforehand knowing 48A would be the max it would ever pull: 1.) NM-b works on 60 amp breaker if the operating load falls over 50 but not over 55 amps. If it falls on 56 amps you cannot use 6/3 G nm-b and a 60 amp breaker. 2.) 6/3 is normally protected with a 60-amp...

We recently moved to a new house and the Main Panel had plenty of room and a fairly short run to where I wanted to put a Wall Connector. I was initially going to install a level 2 NEMA 14-50 Outlet and use my spare mobile charger, already purchased Homeline 50A GFCI breaker, and Hubbel 9450...

Bump, will to part this out.

This thread is for the general discussion of the marketplace listing FS: Tesla Mobile Connector (Gen 2), Hubbell 9450A 50A, and Square D Homeline HOM250GFIC 50 Amp 2-Pole GFCI Circuit Breaker. Please add to the discussion here.

This thread is for the general discussion of the marketplace listing FS: 52ft of 6 AWG Wire. Please add to the discussion here.

Thank you, I thought I provided enough context in my original request "New Work Box, In wall." but I ended up finding what I needed anyway. I also had a heck of a time trying to use the forum search to find it. Anyway, found it now, ordered and on the way to Level 2.

This is what I was looking for: https://www.amazon.com/gp/product/B002FYJ758/ref=ox_sc_act_title_4?smid=A3V9R9BV19MQT8&th=1 In wall (old work box) cover for Hubbell HBL9450A This is not what I was looking for: https://www.zoro.com/raco-electrical-box-cover-30-60a-receptacle-888/i/G3275903/...

Figured this would be the place to ask. I'm installing a Hubbell HBL9450A and for the life of me can't find a wall plate to cover it. New Work Box, In wall. HELP!

My Model 3 Long Range got a Stealth Hitch upgrade last weekend. Really like it with minimal if any hit to range so far. 3 hour install and totally worth it with no ground clearance issues either.

3 phantom braking instances today on interstate 75->60mph brakes, luckily nobody too close behind. Absolutely nobody in front of me and I wish you could check the log or something of the car to see what it saw or what triggered it. 2021 M3 long range, just updated firmware tonight so we'll see...

Apologies for the delay, we've had a few snow storms and I haven't got around to pulling the wire yet. As of now I have the 6ga Wire, 50A GFCI breaker, and Hubbell 14-50 outlet waiting for a nice warm spring day to be installed.

Sold 2013 Subaru Impreza Wagon with 115k for $10k and put it towards my 2021 M3 LR

Front, Rear, and Dual Motor. All clean, original adhesive removed and ready for your DIY repurpose. For those wondering, everything is metal with the exception of the Rear 'T' Asking: $40 shipped

Black emblems now on a Blue Model 3. I went with with these from Teslamaize (ABS T's and Metal Dual Motor) https://www.teslamize.com/product-page/combo-set-2 Better pics when its not so crappy out and I can get a proper wash in too. Overall, about an hour to do the whole process of remove...

I didn't see a thread for specific colors so I figured I would start one. This thread can be repurposed for others with Blue Model 3's to see what different wheels/badges look like before they buy. Here's my 21 Model 3 Long Range with 19" Sport wheels PlastiDipped (Black base...

Looks like Brick reflection not cheetah print.

New to me: 2021 Model 3 Long Range, Acceleration Boost, 19" sport wheels plastidipped at the moment. Just installed some PPF and mudflaps, still need to get the drivers window tint fixed as there is a chip on the inside from something.

Currently looking to get my 2021 Model 3 long range back to stock configuration (18"/Aero Covers) and would like to trade my 19" Sport Wheels (currently plasti dipped) with Pro Contact tires mounted. Located in Milwaukee, WI

Well I can tell you this, whoever installed the existing sub panel in the detached garage ran Romex from our basement, underground in schedule 40 conduit to our garage. If Romex in conduit to a detached garage is a no-no then that's even more reason for me to pull it out and put in the bigger...

Here's my '21 M3LR, plasti dip wheels are base coat- black, metalizer - graphite pearl next with final top coat of glossifier.

Hi Dave, To halfway wrap this up-- I ordered 52 feet of 6awg TNNH and 52 feet of 10ga ground to go with my 50A GFCI breaker I got a screaming deal on as well... I figured that gives me a few options, all future proof. Option A: Run the 6a to a new sub panel in the garage and place the 50A GFCI...

Thanks for the info. My only hesitation on not dong the HPWC is that we will likely only be in this house for 1-2 more years.

(1) 30A Breaker in main panel feeds (2) 15A circuits in the garage with what looks like 8ga wire. That is the only wire running in the 1.5" conduit at the moment. As for space in the main panel, there is an unused 50A in the main panel that used to power an electric range/oven. I would replace...

Currently wall charging my model 3 on 120V 12A and looking to add a Nema 14-50 plug. We are in Milwaukee, WI - 1950's house, detached garage ~40 feet away from main panel. Main Panel: 100A Service Garage: Load Center with (2) 15A circuits for receptacles & garage door opener. Now, the...

SOLD to the local above^

I have you next in line if ^^ doesn't take it.

Firm on price, Ships from Milwaukee, WI

Thank you so much for posting this, just did it on my 2021 Model 3 and its perfect.

Tesla Blue Interior Lights and Tesla Logo Puddle Lights (4) I have (4) blue interior lights (front footwells & trunk) paired with (4) Tesla logo puddle lights and (1) stock glove box light. I will also include (2) pigtails to make the light installation easier if your Tesla has short cables...