Search results

I did the $2k upgrade. Both screens are replaced with the MCU2 upgrade (as noted on the invoice as well).

Time for a lowering kit now!!!

WOW! What a difference!! Looks great!!

It may be your battery contactors and pyro fuse. That's what mine needed with those codes.

I see that the inner FOB and battery are about 1/3 the height of the actual plastic fob. The buttons are tall to mimic the car shape and just overall design makes it much thicker than required. I have searched for alternative cases that would be slimmer or half the height maybe but have seen...

It was a package that could be added back in the day by Tesla. It consisted of a new upgraded pyro fuse and software upgrade. They dont offer the upgrade anymore.

I wish I had an opportunity to ask for the Ludi+ pyro fuse while they were replacing the fuse (and then found someone to enable it in the software). I am assuming the fuse they used in the replacement is not the higher amperage fuse?

My car only has 50k km on it and that was the remedy so it cant be directly correlated to cycles? 95% AC charging.

wait.. isnt the screen the same size but just sideways? It's not totally outrageous to think that the new screen/mcu could be fitted into our 'legacy' cars in a portrait mount?

Nice.. My 12v battery still seems to be ok (not complaining)even though its at %16 health when I put it on a tester. I guess the CCA is low and the DC-DC must be working extra to keep it happy. I am ok waiting if they are soon going to replace them with lion batteries instead of agm. 2015 with...

I just had this (look for my post to see same error codes).. Removed and replaced high voltage contactors and pyro fuse. Parts included were.. COVER, FUSE, TOP PANEL(6010488-00-D) 1.0 FIELD KIT PYRO FUSE PACK 1.0 1.5(1089619-00-D) 1.0 FIELD CTR KIT W/O FUSE PACK 1.0 1.5(1084515-00-E)...

For those that want to know.. Well.. Vehicle is back. Removed and replaced high voltage contactors and pyro fuse which required battery removal. Parts included were.. COVER, FUSE, TOP PANEL(6010488-00-D) 1.0 FIELD KIT PYRO FUSE PACK 1.0 1.5(1089619-00-D) 1.0 FIELD CTR KIT W/O FUSE...

Maybe but the weather has been warmer, no long trips, and the car has rarely been supercharged (it's been months since the last supercharge). I just drove around the block and it's limited in power but drivable. Could they remotely diagnose yours or did you have to bring it to the service centre?

Car was driving perfect earlier in the day. Ran the radio for a while when cleaning the inside and polishing etc. The errors popped up when nobody was in the car but the doors were open and the car was not 'on' (in park, no key fob around). I only saw the errors 2 hours later when I got in the...

I dont think there is anything better than CKwraps. You can drive west or north (locations in TO and Ottawa). TONS of stuff on YouTube for ckwraps.

I was not expecting them to come out with a bit more gloss so that was a nice surprise. I also feel like I can clean them easier with the limited brake dust that our cars produce. Since yours are close to gloss already I wouldn't go through too much effort or cost to do it TBH. If you are...

The only time they rub is in the front when in reverse with the wheel turned all the way. It rubs on the front plastic fins in the front of the wheel well. I took a wire wheel to shave the non-functional fins down a few mm's to eliminate the rub. Even when I have it really low with the lowering...

Awesome!! I did 50% matte 50% gloss knowing that I would get them ceramic coated which increases the gloss. So happy with the way it turns out.

These ones!! The prices are USD so its not cheep but the quality is outstanding (you dont want to cheep out on these). Dont forget. I also used BLOX lowering links to get the car to sit lower as well to make it look that way.

WOW WOW WOW.. This looks just amazing!!! Did you use Union Rim Repair as well? They did an amazing job doing mine black.

I know its early March and yes I know there will still be another dump of snow. But I really really really want to put my summer 21's, lowering links, and spacers back on my car!! I also picked up the Maxton front lip for my car too so I feel like a kid waiting for xmas to come. It looks like...

How much $$? I have a 2015 but the sunroof was replaced with the newer revision so your newer hardware should fit?

I will tell you that Velocity Auto Body is stellar and Tesla Certified. I have had them do my front bumper refresh and insisted my car goes there for an insurance claim. I kid you not that It comes out better than factory and the paint is MUCH harder and resistant to stone chips than the very...

One thing I can say.. as soon as I upgraded to MCU2 I received 2 updates within 3 days and got 2021.4.3 the day it came out. Last one fixed the dark rear camera. Upgrade took 3.5 hours and only had to re-pair phone and garage/homelink. Confirmed that they replaced the centre screen on the...

Thanks for pic comment!! And yes.. mine has a metal ball on my sensor (unlike your plastic one). Odd that they would move to plastic. I would order the part and replace it yourself. I wouldnt want the SC to know that you had it lowered as they may decline any suspension warrantee work in the...

Silly question but you did remove the locking pin right? And yes.. I would try to spray some lube in there before doing the others. I use grease in mine before I installed them (and I remove/re-install every winter/summer tire changeover).

You can absolutely use your phone as a hotspot for your car when driving. My recent roadtrip didnt have LTE in the car when in the middle of nowhere (which uses Telus in Canada) and my iPhone had full bars on Rogers (confirmed as my friend had a telus phone what replicated my cars reception). My...

I did the MCU2 upgrade this week. Took about 4 hours at Railside and the visit & service was once again flawless for me. I was on the fence with an AP1 car and an MCU1 that didnt have any issues and the browser still worked a bit (slow but teslawaze worked). I can confirm that they did replace...

Wow. When I remove the locking pin on my BLOX links they come off extremely easy and almost by hand (compared to the factory links). I also put some lube in the sockets as per the manufacturers suggestion.

Thanks for the review!! Which version light did you install? I see they have a few night breaker models . What Kelvin are they rated at? Is it 6000k? I wish we could have the brightness from those with a bit of a whiter light (just a slight blue).

Yep. Tesla replaced both my front door handles (2015 p85d) with the rev 2 door handle. The rubber seal typically goes and comes loose (as well as the microswitch) on the originals. Mine was leaving black streaks all down my windows.

Seeing as I have taken on and off my front bumper more than once and can do it with my eyes closed.. This will be my approach (I replaced my bumper with the Tsportline bumper). I may also do the black painted housing on the headlights as I think that would look great on a black car with chrome...

I have 20mm spacers on all 4 of my factory 21's and lowered. Mine rub when backing up and cranking the wheel in the same place as yours. Everyone with spacers has the same issue so I suspect your aftermarket rims have a 20mm+ offset on top of the factory offset. I used a wire wheel to grind down...

Please let us know what the lasers look like!!

Sorry for the confusion.. I pull the car onto the driveway for the actual wash and then back in for the drying.

I am still under extended warrantee for another 10 months. My MCU1 seems to work pretty well. Rarely crashes or reboots and the browser even works from time to time (I use it for tesalwaze). The voice commands work after failing the first time. I wonder if the EMMC fix makes the browser much...

I picked up an $85 (on sale) 1500 PSI electric pressure washer from Amazon (with included foam canon) that stays in my garage (never gets below 5c) and fill a bucket with warm water and some higher end soap. Takes about 12-15 min (more if I dry it). There isn't much to celebrate these days but...

It was reduced in UK as well. I suspect we will soon get the price reduction as well. I wasnt going to do it with an AP1 car at >$3k but I may bite at $2k.

well.. after starting this thread I was ready to jump on the Lasers.. Now I see Osram has an 'unlimited' version with higher numbers than the laser next gen but wasn't rated the best?? wtf?? And there is also a laser Xenarc which isn't in any of those charts which some youtube videos say are the...

I have seen a few videos stating these are quite a bit brighter than the standard Xenon HID's (pre LED headlights). They are not 'laser' like the product says but they do throw quite a bit more light than the stock ones based on the youtube vidoes I have seen. They seem quite expensive for...

It seems that some of the older 85's etc that have gone with the MCU 2 upgrade may be getting updates earlier than the MCU 1's. This is purely based on some observations of others posting their software updates and not teslafi, etc..

You need to add the energy buffer to get the total battery size (but also know its not all usable). This is the math to get my battery size on my S (which accurately shows the same as what the car says it has).

I think its 48.25 with the small fonts. I am on 48.12 and my time and battery are still in the bottom left corner (the posts of the MCU2 with 48.25 have them smaller in the bottom right). check here for the difference...

Weird.. similar P85D with 50km (30k miles'ish) and it never 'hums' after a charge. Only hums (like a jet plane) when in Insane+ mode or after a ton of launches.

Velocity Autobody in Markham. They are Tesla certified (not many are). I had my front bumper refresh done there and was amazed. Its all high-end cars there and tons of teslas. I had a small fender bender a while ago and insisted the insurance company sends me there. EXCELLENT work and better...

Booked Blue for Mon Ski and overnight stay at the village for a night of heavy drinking and a planned massive hangover!!

I just put this high into my options list!! Thank so much for the offer!

blah.. was considering going skiing next week. I guess its still best (from Toronto) to drive right to Blue and then stop in Barrie on the way home? With this cold weather I am already at about 60-65% efficiency. Time to start parking the car in the garage.

This is my P85D. As you can see.. I have very minimal DC charging. Maybe thats why it still stays over 100 for a while? It will eventually drop below 100 after 50% or so though. I also received 40.9.2 last night (haven't charged on it yet).

Some people like to know some details on how the internals of their car is performing (e.g. why I run Scan My Tesla). Is my battery at 5C or 17C. Is my stator warming up my battery or am I using battery power to warm it up? Its the same as a computer.. Some people never use task manager or use...