Welcome to Tesla Motors Club
Discuss Tesla's Model S, Model 3, Model X, Model Y, Cybertruck, Roadster and More.
Register
  • The final cut of the 9th episode of the Tesla Motors Club Podcast, featuring Balazs Biro, of the prominent Hungarian EV channel Villanyautósok, is now available. You can watch it now on YouTube or listen to it on all major podcast networks.

Search results

  1. S

    Experience with fixing roof leaks

    I had a new roof installed and then solar. Big leak after the solar install happened. I called and they came the same day and spend 3 hours fixing it. One of the installers didn't patch a pilot hole that was drilled. A painter came a week later to paint my ceiling where the water dripped...
  2. S

    Gateway to Backup Subpanel connection

    Ah, bingo. Cost savings. Thanks for clarifying! Did a little digging, the 200A breaker is $325 and the 125A breaker is $100 on Amazon. I was wrong about the material costs being under $100. The cost difference between 1 and 3/0 wire is about $3 per foot. Maybe 10 feet per wire, or about...
  3. S

    Gateway to Backup Subpanel connection

    I agree. I'm not sure why the design uses a backfed breaker instead of a main breaker. The panel does support 200A backfed 4 position breaker. It's a HOM2040L225PRB. The breaker they are using is HOM2125. There is a 200A version that's 4 position backfed. They are using a HOM4RK2HA...
  4. S

    Gateway to Backup Subpanel connection

    I do know the model of everything and am considering upgrading in the future if Tesla doesn't fix it. The 225A backup subpanel is being backfeeed by a 125A breaker from the Gateway 2. It should be backfeed by a 200A breaker. Just the wires and breaker need to be changed. The cost difference...
  5. S

    Gateway to Backup Subpanel connection

    The panel and breakers are all specified in the drawings and plans. Those are submitted with the permit application also. I believe that's a requirement to specify the brand / model of panel and breakers. So I know exactly which panel and breakers they are using as well as wire sizing.
  6. S

    Gateway to Backup Subpanel connection

    Tesla is installing a 12KW system with 1 PW+ and 1 PW. These are feeding a Gateway 2 via 50A and 30A breakers, along with 125A from my main panel. My main panel is an old Square D 200A panel that supports only 3 circuits, with 1 circuit at a max of 125A. I currently have 3 circuits on my main...
  7. S

    How long between inspection and PTO? [various areas]

    where do you live? I was told by my city that in the backup switch is only being approved by permitting authorities in areas of high fire danger. many cities agreed not to approve permits with backup switch for now since the pilot program with PG&E is only in high fire areas. tesla...
  8. S

    'whole home backup' confusion

    If the gateway is rated for 200A, how can it be feed by 200A from the grid and 50A X 2 for the powerwalls/solar (300A total)?
  9. S

    Does Tesla cap solar production in self consumption mode

    I'm curious about this also. I have the same design. How can 1 powerwall+ support a 12KW array? Someone correct me, but isn't the powerwall+ inverter only capable of converting 7.6KW fo AC power?
  10. S

    Discussion: "Powerwall +"

    Hi mje123 - how were you able to verify with PG&E? My city is refusing to issue a permit for my work to proceed because they say PG&E has not approved the backup switch.
  11. S

    'whole home backup' confusion

    It's crazy they put 100A source into the gateway on a home with a 200A main panel service. The gateway 2 supports 200A source input, 200A output to the backup panel, and the optional internal panel board can support 200A with 6 spaces with 125A breaker in each spot. The only reason I can think...
  12. S

    Any experience getting Tesla to "confirm" adding circuits to whole-home backup?

    Will do! Unfortunately, I'm still stuck in permit approval. My city won't approve the backup switch because they say PG&E hasn't approved it. I may want to wait a month or two to see what happens. I hate the look of the gateway and extra panels w/o the backup switch. It will make my house...
  13. S

    Any experience getting Tesla to "confirm" adding circuits to whole-home backup?

    Just ask for Tesla's load calculation submitted with the original permit for the install of the BLC. That's what I plan to do. Then when you want to add a circuit, confirm the added circuits still meets the load limits of NEC 220 based on original load calculation + added circuit. You can...
  14. S

    Any experience getting Tesla to "confirm" adding circuits to whole-home backup?

    Maybe I'm in the minority here, but what's so hard about adding a 50A circuit to the BLC for an EV that will most likely be only running at night and you can put a smart charger that can throttle the current draw if needed.
  15. S

    Any experience getting Tesla to "confirm" adding circuits to whole-home backup?

    I am not an electrician, but am installing pretty much the same system as you with Tesla right now. In the docs, it says why each warning label is present. For that label, it says "Per NEC Code 220". I believe this is a max load calculation. Adding circuits or a subpanel should be OK as long...
  16. S

    Any experience getting Tesla to "confirm" adding circuits to whole-home backup?

    I think you are mixing two separate things: space on the Tesla added panel and peak load. Both are relatively easy to figure/solve in my opinion. For peak load, just calculate what it would be for all the appliances you'd run at the same time. Note that startup and steady state load are...
  17. S

    Discussion: "Powerwall +"

    It hasn't been installed yet. I'm waiting for city permits to be issued, but yeah, I did receive the docusign on Friday afternoon regarding the backup switch. The backup switch is in my permit application drawings and I have one powerwall+ and one powerwall 2
  18. S

    Discussion: "Powerwall +"

    I got the same docusign. That's just a PG&E form. Notice there is a place for PG&E to sign. It doesn't mean anything unless PG&E signs it. The copy Tesla has on file in my account is only signed by me. I'll believe it when it is signed by PG&E
  19. S

    Please check my solar/powerwall calculations

    I would not expect to export as I would size it such that the system approximately matches my peak usage.
  20. S

    Please check my solar/powerwall calculations

    My ROI is as follows: my peak usage is about 10 kWH per day. @ ~$0.40 per kHW, that's about $4 per day X 365 = ~ $1460 per year. I can get a small solar system + 1 PW for about $15K. So about 10 year to recoup the cost. The assumption is that all the solar generated is stored in the PW and...
  21. S

    Please check my solar/powerwall calculations

    You're You're right, I added the generation and distribution charges. I should just look at the distribution charge since the generation credit offsets the generation charge for the most part. It is about $0.52 per kWh in the summer and $0.35 per kWh in the winter.
  22. S

    Please check my solar/powerwall calculations

    Hi I'm looking into if solar/powerwall makes sense and having a hard determining if my assumptions are correct. I'm in the bay area under the new EV-A rates where peak is 4pm-9pm and off peak is during most of solar operating hours. Due to this limitation, it appears I can only earn mostly...

About Us

Formed in 2006, Tesla Motors Club (TMC) was the first independent online Tesla community. Today it remains the largest and most dynamic community of Tesla enthusiasts. Learn more.

Do you value your experience at TMC? Consider becoming a Supporting Member of Tesla Motors Club. As a thank you for your contribution, you'll get nearly no ads in the Community and Groups sections. Additional perks are available depending on the level of contribution. Please visit the Account Upgrades page for more details.


SUPPORT TMC
Top