Search results

Drove by this location on July 21st. No sign of any construction.

Its not carbon fiber look.. actually the black color blends very nicely with the blue to extent that is practically not seen from a distance away unless you were looking for the mudflaps.

I saw 135 Wh/km on my 31km way to work last week before putting the mudflaps on. Its a 50-50 mix of highway and city roads. Since i have put the mudflaps on, i got 138 and 137 wh/km. Tried to drive similarly during these 3 days so its very close based on this limited testing.

I got the bolduc mid west version. Installed it yesterday. Will watch this week if i notice any additional wind noise or big drop in range

Applied for rebate on June 1 ~ 4pm. Saw rebate in my bank account on Dec 1 .. exactly 6 months to the day. I had called them about 3 weeks earlier and they gave me canned response that they dont have a way to see what is processed etc etc. However, when I called them on Nov 30th (1 day before...

Thanks for this tip. I spoke to Max and put down deposit for the Hakka R3’s. Comes to $265 + $15 install = $280 per tire + taxes

Anyone notice issues with glove box being misaligned? It sticks out on the left edge and you can also see the misalignment in my car on the top edge near the door side. Also i noticed several times now that when playing songs from my iphone using bluetooth, the playback suddenly stops and then...

Yeah, I did not get the die-cast model either when I picked up on the 31st at the IC. Was kinda hoping I was going to get it but too excited about the real car to make a fuss about it.

Still looking for someone to exchange my USB-C for your Lightning on 31st May ~11am at international center. Less than 2 days away now. Cheers!

Congrats! I’m scheduled at 11am on 31st. My VIN’s also in the 22xxx. Looks like our cars arriving in TO at same time

Not getting into fine print. Just keeping it simple. 8 AWG wire is rated to 40 Amps. Car charging considered continuous load which means 80% of that. You will be safe with 32A. Anything beyond that requires electrician or fine print review. I would rather be extra safe than sorry.

I’m on May 31st at 11am at International Center; Looking to exchange USB-C for Lightning. Or can exchange later in Newmarket/ Aurora/ Richmond Hill/ Markham area

After seeing all the posts about scheduled delivery dates, i felt really left out.. but now I am in! Scheduled for 11am on May 31st!!

My understanding is that model 3 needs extra long since the depth of the bumper is 3.5 inches.

My VIN has disappeared too. So we seem to be in the same boat.. my profile is also fully complete. I have been assigned Denzel too but have had no contact from him. Is he from Oakville location?

Skene Design brackets are cheaper at $50. But not "no drill" technically though the holes drilled are on underside and unseen. Check it out: Skene Design No Holes Front License Plate Bracket

Yes, I am planning a DIY as well. Wash, claybar, polish and am using Gyeon MOHS for ceramic coating. Will see how it goes.

Are you sure you did not sneak in and take a pic of the one I have? Supposedly the same $10K have cut them. Cheers Are you sure you did not sneak in and take a pic of the one I have with the rest of my accessories? They have have been cut by the same $10K plotter and are identical so we have...

I ordered the same on too and was dissapointed with the cupholder cut. On contacting RPMTesla I was told quite forcefully that the cut is the way it is supposed to be since since the vinyl needs to be stretched and that i should watch the install video. Supposedly the cut was made by a $10K...

VIN 226xx Blue, Aero

Yes, depends on your model. I put 5280W for my Samsung dryer and I put it in Step 9.

I used this calculator as my starting point: Canadian Residential Electrical Service Size Calculator

Wow.. these numbers are expensive! My DIY cost me $250 in materials from Home Depot, 8 hours of my time and $90 for the ESA permit. This allows me to use my existing 100 Amp service with max 32 Amp for the car in my power consumption situation. To be fair, I should also add 0.5 man week of...

These fees are all specific to Ontario; would not apply in Tennessee if I am reading your location correctly. Cheers

I forgot to add that there is also the AC tax of $100

OMVIC fee of $10, tire stewardship fee of I believe $4.25 a tire and then your vehicle plating fee $27 (for new plates) and annual registration fee of $120(or part thereof depending on your birthdate) would be the additional costs in Ontario. Tesla does not charge any other fees besides the...

Yes, not only did i use 40A breaker as was previously on the stove circuit but also used similar 8 gauge electrical wire- rated at 40A which for electric car charging can be used to a max of 80% load or 32 A. All these details count. The only defect that the ESA found with my self-done wiring is...

ESA is Ontario wide not municipal

I had my ESA inspection done just last week and had no problems. I had the same situation as you that i use gas for cooking and no longer used the stove breaker. So I rewired to that breaker( actually got a new 40A breaker since old one was 30 years old) It seems your electrician might be...

Dont anybody waste your time. That was a wild goose chase. No Tesla’s in that location or anywhere visible on that street

I work closeby. Will check it out today as well. Fingers crossed!!

I got a pretty decent quote of $186.52/ month from Aviva for M3+ wife's Toyota Highlander with $1000 deductible and $1M liability coverage. Planning to go with them. Anyone has thoughts on Aviva?

I was told by one of the floor people at Tesla Lawrence that it would be at the International Center near YYZ

Ordered Apr 12, Metallic Blue LR PUP Aero 18" Waiting for VIN and delivery!