Search results

Menu adjustable - basically need day time runnings lights on atleast. They’re powered through the break light wiring loom in boot

What you have is a post about model S foggies. I’ve installed model 3 (SR+ / RWD) where there 1. Wasn’t any (was only the plastic covers) 2. No wiring at all so installed a full harness which plugs into the rear break lights & work even in menu. If you need anything more private message me for...

Anyone know if the processor is upgradeable through Tesla similar to how early model S owners upgrade their MCU’s ?

Still avail?

I have Slipstreams but their painted white & 19” - on run flat tyres. Lmk if you’re interested

Any idea of cost of shipping to Sydney, Australia?

I’m convinced black is the best & easiest colour to make look good. Just dark tints/lowered/spoiler/diffuser & off u go!

Game changer, adds to the fun of driving a Tesla - like a video game. Takes about 3-4 hours of driving to get 100% used to. Reverse parking & long/big corners are harder Seller: https://a.aliexpress.com/_mqCWzHe

If u have a new SR+ chances are it’s an LFP, if so, u should be charging to 100%

Mine was the same as yours. I bought stock on covers from AliExpress for next to nothing, looks perfect now. Entire cabin went from black to white for <$500

Is that 20mm? I’ve seen 5mm on my mates and it looks a lot further out.. I’ve ordered the 5mm but now worried Can u post a pic of them from front on please? If they push out far enough I’ll get them from you if you will post int. to Sydney, Australia?

Hey mate, i realise this is 1 year old now so most probably had worked it out, for anyone else in the future...heres the answer - SR+ come with plastic covers in the front bar, no lights whatsoever let alone any available wiring loom/harness either. So.. Buy fog lights cheap on AliExpress -...

Done, 4.5 hours but finally worked it all out. Found a good video on YouTube to gain access through the firewall The 2 separated wires connect via the white cable which runs along inside the boot lid, they connect to the rear break lights. Hope all this helps someone else in the future.

There is no old harness mate. I’ve installed the lights now just making sure I have an idea of what’s needed beforehand & can’t work out why they gave me these extra plugs White is obviously for indicators which I don’t need and can by-pass but these extras.. wierd.. anyone?

I’ve installed the lights just need to do the wiring now

The first thing I tried a few weeks back. They don’t have any that’s why I’m looking for help here

I have recently installed fog lights to my 2021 Model 3 SR+ (non indicator ones) which I got from AliExpress and didn’t have the wiring as RWD model 3’s don’t have it stock. I’ve since obtained the wiring through Amazon There’s no install videos online and the threads here are quite extensive...

Can someone help (ELI5) - see the pic, I need to know where exactly all those plugs go, if it’s simply marked as to where I put them in good to go & as always, thanks in advance 🤓

You are a great man, thank you.

Ive just ordered some 10mm spacers as my widebody kit goes on over the weekend, anyone here can speak from experience tell me if im doing the right/wrong thing here>? Should i go bigger than 10mm etc Apprecaited in advance as always

mine is 100% from the drivers side door as when i slam the door closed it stops, if i simply close it softly it will squeak the entirety of that drive :( :(

Same issue in my 2021 SR+ (per above), frustrating!

Ill be honest as im not sure, ive recieved the wiring loom however the seller cant give me a tutorial video on connecting them up, ive posted asking if anyone had a video, fingers crossed i find one & when i do ill be sure to let you know how they work! :)

I recently installed the standard foggies in my SR+ and only then found out there was no wiring, ive since bought the wiring from Amazon & ready to connect it to the newly installed fog lights, the seller however didnt have an install video, anyone know where i can find how to wire up an SR+...

I’ve found the harness for sale on Amazon & instructions are super easy now I’ve done all the hardwork already. Thanks 🙏 Here’s the link for anyone else that may have the issue down the track - https://www.amazon.com.au/dp/B0993D45KR/ref=cbw_us_au_dp_ags?smid=A4XRJ8S0WXSO0

The wheel shop drilled them for me in less than 5mins. As I said fit like a glove 😇 Point is you can put model S rims on your model 3..

I’ve purchased and installed a set ($210AUD) but they didn’t come with wiring as they stated my car should already have it, it turns out SR+ 2021 doesn’t have the wiring loom stock. Any ideas where I can purchase the wiring from seperate? I’ve tried sellers on AliExpress but they all will only...

They were drilled, you wouldn’t notice. Fit like a glove

More pics

Original: * Steering wheel - 2 months of use, no marks or damage, airbag cover comes with but use your own - $550 * Side mirror covers - pearl white, no damage - $80 * Break peddal cover (rubber) - $35 * Frunk spring - $25 * Trunk badge (slight crack cant be seen when fitted, see pics for...

Ill buy the ingennext if its still avail?

Yes - see attached my model 3 with Tesla original model S & X ‘Slipstream’ rims.

Model S & X Tesla original ‘slipstream’ rims on my model 3. Run perfectly, engineered and 0 issues after 6-ish months & 5,000kms - of course not a straight fit however much easier than expected

Anyone had any luck with this as yet I’m having the exact same issue as OP.. V.2 8bitdo (black) Xbox 1 controller (white) Using dashcam port for adapter.. TIA

Thanks my dude 🤓🤘 Just getting warmed up. Only done the interior & made it slightly quicker. Still have external (apart from rims) body kits & performance (breaks/Ingennext etc)

Yeah had to get them drilled, super cheap/quick/easy

Black on model 3’s is sooo easy to make look good. Drop it & put big black rims on, paint calipers red.. fully agree with the comment - the only car I’ve bought in white I’ve ever regretted

October 2021 LFP battery/908 motor Interior: Yoke Lettered TESLA airbag cover Interchangeable seat colours (B&W) Front seat massage Audio upgrade Heated steering/seats Arm rest wallet storage Cabin camera cover Noise cancelling door seals Autopilot Weight Dashboard & door inserts Pillar &...

YES! Im in the same boat, I have the same issue just on my driver door.. ive taken it to Tesla 3 times and they apparently lubed the seals up which seems to fix it for a few days, ive even tried installing extra rubber seals to no/not much avail. If anyone has a fix PLEASE help

Could I use these on my model 3 so model S rims would fit? Apparently there’s a slight offset..

Need to know the answer to the question above as well.. anyone?

I was wondering if possible to have any/all the original factory tinting from the glass roof so I can buy the sun shades so on a nice day just open up the shades and basically have wa convertible without the wind in my (almost now non-existent) hair. Has anyone tried/succeeded this or if it’s...

Is this still avail?

I only have “rear fog” option on my screen which is greyed, does this mean I can’t install front fog or does it appear once installed? Is there a way I can check the front fog situation without removing bar/wheel? I was never offered this at purchase and can’t see anything on the Tesla site...

Check ingennext’s site, basically behind your RH rear wheel there’s a label

Ill take them if they are still avail>? Ill take them if still avail>?

I have recently purchased a Model 3 and could only get black interior, I desperately want white front seats, if anyone is keen on a swap, these seats are only 10 days old and perfect condition ..?