Search results

PM'd

Hi, I have another pair of the same to offer if someone needs a set of 4 - same price. Might be easier to buy 4 at once. PM me if anymone needs another set of 25s. Thanks.

Have no idea - I never touched them. Left them on. Sold by the way.

OK, so I got my camber and toe arms installed. Here's what ive found ou 1) they don't seem to impact ride quality to a noticeable level, which is great! They MIGHT impact noise coming through to the cabin when on rough/grooved interstate highways. Not 100% sure on that, but car tire noise...

ALL SOLD

Ok, I finally am done futzing with the lowering links and have it set to where I want it. Hopefully by Tuesday I will have the Camber and Toe arms installed, big thanks to @Russell for posting the specs here and @Dannietjoh for all the advice. Here is where I came out. I went with keeping a...

OK, I finally have the toe arms, camber arms and adjustable lowering links (bloxsport) in my possession and an appt at a shop next week for the install and alignment. Now I just need to set the rise height I want before going in and figure out desired alignment settings. I’m still planning to...

SOLD

OK, thank you. What is the pickup address so I can estimate the drive distance/time?

Still available

OK, have never heard of that. Here's a link to a better explanation of S/X typical shudder and camber related issues: Alignment Kit 1 - Acceleration Shudder & Inner Tire Wear - Tesla Model X & S

Is this a Model X you have? I believe that shudder is actually at the front and the remedy is lowering the car. BUT after lowering, you most likely will wear out rear tires super quickly and these parts WILL help that tire wear. You might already have excessive wear - it’s a problem for me...

Yes they will. See this thread for information: Rear Camber arms option - Hardrace They are not as elaborate of a design as the other ones, but built very solidly and do the same thing

Still available - these are less than half of what Unplugged or N2itive cost.

Bump

PM'd back

Bump

Bump

Glad to hear that...between you and the other guy who had said he had to drill new holes (then realized he was talking about the front...) you guys are scaring me! Anyone in the US need a set of Camber Arms??? If so, go here.

Bump bring offers!

Price reduction - $195. come get them in socal!

Hi there, I have one rear Gray Turbine wheel for a Model S in perfect condition. No curb rash, can't find much in the way of dings - It's Minty. 290 obo. Located in Southern Cal, but will also ship.

Hi there, I have a set of Brembo Model S Brake Calipers for sale. Taken off my own car by me personally and worked perfectly - swapped for a set of powercoated calipers. These are a great starting point if you want to have them powder coated or even just do a nice DIY job. Much better than...

Down to just the near perfect wheel. $290. Anybody need one?

Yeah, I feel ya - too much expense and effort for what is really just getting the alignment so it doesn't eat tires. In my case I'm going lower for looks and hopefully some performance, so it at least gets me something else. Good point on the adjusters - those do look easier. Oh ok, this...

Are you sure about that? I haven't seen anyone else have that problem. Are you puttiting the adjuster out toward the wheel or inboard near the subframe mount? Bummer, was hoping you'd get away without them. I just bought a set of hardrace toe and camber arms. What is the problem with the...

Anyone need a set of Hardrace Camber Arms? I just got a shipment in and bought an extra set for a buddy, but they decided not to use them. Add is posted in the classifieds here: https://teslamotorsclub.com/tmc/threads/hardrace-camber-arms-nib-model-s-x.283202/

Love the pano love on here! For those of you who had a gen 1 pano roof replaced with a gen 2, were there any differences? Advantages/disadvantages? Thanks - about to have mine upgraded.

Sorry about the damage! How is the V2 sunroof working? Any differences/benefits/minuses from the swap?

Hi there, I have a set of Hardrace Camber Arms for Model S / X. Brand new in box, never used, comes in original packaging with sticker. $290 plus cost of shipping. Parts located in Orange County, CA. PM me.

Well done Gimpster! So glad to hear of another success story. 👍 I think I'm going to jump in with both camber arms and toe arms as i plan to run the car in low mode plus lower it another .75-1". My question at this point is what my ideal alignment settings should be? I plan to do some...

The dinged up wheel is sol, the perfect wheel is still available.

Bump - nobody needs rear turbines?

OK, I've ordered both camber and toe arms for my car so I can lower it. Parts will be shipping from NL and hopefully i don't get assessed a bunch of duties - we will see. I only plan to lower it .75-1 inch, but I don't want to chance any alignment problems or have to do the job twice. If it...

Hi there, has anyone had any failures or mechanical problems due to these? I know how the suspension works and just wondering if the 3d printed ones are failing on anyone. Thanks.

Bump, need these gone.

So has anyone else put the hardrace arms on and run any miles besides gearcruncher? Ride quality?

Bump

I do like it slightly lower in the back - kinda like a classic Alfa. Unfortunately I think the boatiness is from the air suspension and no hard bushing will improve it. I have an early car and it’s ride is already more brittle than later ones, so don’t want to add to it.

I’ve decided my goal is to get the car to match the design rendering in the center display. Looks so good! Notice everything is low and pretty flush, but the front still sits a smidge higher. Must be how Franz intended it.

see this link from hardrace: Knowledge: Harden Rubber or Pillow-ball - Hardrace Europe Someone near me just had both installed - I’m hoping they can give some feedback and perhaps give me a ride.

Thanks for the update! I’m in OC as well so might have to use that shop. How has the ride been? Notice any additional noise or harshness? Would love to get a ride sometime if you are up for meeting.

SOLD

Just curious which car you use this in and where does it fit? Thanks.

Hey there, I have one VERY good condition Conitsportcontact Tire for a tesla Model S. Located in SoCal/OC. See my CL post for more info: Continental 245/35r21 Tesla Model S ContiSportContact Contisilent...

Hi there, I have a pair of staggrered rear turbines in grey for sale. Prefer to sell locally due to weight - I'm in SoCal/OC. See my CL post for more info: Tesla Model S Turbine Wheels - 21 x 9 - rear Staggered Grey Gray -...

Thanks. Yes, was considering trying something like this but not sure if it would be accurate enough. Was also considering putting screws into a large part of the trad, measuring in the front, then rolling backwards so measuring off the same “pins” if you will. Trick will be having a good...

Thanks! Darn, I wish you had installed them already. I’m really worried about the harshness added since these have solid bushings. They’re more affordable, but the only ones that don’t have rubber bushings. I’m going to contact hardrace Europe in NL and see if they can order them from the...

Hey @Dannietjoh - Did you have to install camber arms in the rear to avoid wearing the inside of your tires too quickly? I discovered the inside of my tires were on the cords as I have been running in low mode. Can't see you getting away with such extra lowering on the stock camber arms, but...