Separate names with a comma.
Nice look Robotfixr.
Hello - I've been sanding non-stop on tail lights in preparation of the test fit with Bonnie. We've been trying to get the perfect finish right...
This is not a finished set so yes I agree, it's not up to par...yet:wink:.
Test fit #2.
Would anyone in the Bay Area be available to test fit a tail light set this week? Thanks in advance.
The first left side sample came out pretty good.
Upcoming right side units, one at a time.
Thanks for bringing djp's post to my attention. They'll be mounted with VHB double sided tape; the same way as the MS trunk spoiler. For a more...
Habious, the back side of the OEM tail light housing is quite complex. I've included a pic below. To tool the back side and the front, which is...
Test fit from earlier today. The fit was spot on, we're working on the high-gloss finish.
Sample Update 5/7/2015. The progression is from left to right / worst to best in the picture with three units.
The other pictures are closeups...
Bonnie, will you be here today Tuesday or next Tuesday?
We're trying to make these self-installation friendly. If you or anyone in the Bay Area...
Please listen to our latest production update, given by our carbon fiber expert Doug. Thanks.
Tesla Roadster Carbon Fiber Tail Lights Update 5/4/2015
We're down to our last step. We anticipate shipping orders out this Monday.
Thanks for the kind words DeedWest. I'll send a PM about the carbon fiber hard top.
The finish line is in sight! We're trying to correct bunching...
Jaff, I'll definitely get to the updated tail lights once we finish the carbon fiber project.
The latest sample came out extremely good! There...
Thanks for the heads up Nigel. I think this latest sample has the correct CF placement. We're getting very close to an acceptable item.
Our second prototype has been completed. However, we are still working on perfecting it. I'll be sharing an update in the next few days regarding...
We recommend installing these on an alignment lift and adjusting camber/alignment as desired.
Model S Lowering Springs
These springs will lower the vehicle approximately 1" for a sportier look and improved handling. The front springs...
First sample pictured. The shape came out great and we're working on a better finish. We've started on the second sample.
Titanium in real life. I have a pic of the new blue also.
@jbadger the hood runs $2500. Thanks for posting the pic Sam.
We're still working on the rear spoiler, the first version needs some tweaking....
Customer submitted pics of our CF hood and charge port.
Hi spiderguy. Hopefully this week we'll have finished pics of a rear spoiler that's in progress.
I just wanted to give an update on the ETA of the tail lights. I've included my original post from 2/25:
"CF Tail Light production...
Aero wheels on a MC Red S85 I spotted in Ontario, Ca
You're all close with the X6 comparisons, but it's not what the Model X is based on. Take a look at a BMW 5-Series GT and then look at the Model...
Work in progress...
Finished Nose Cone!
Just sharing some WIP. I promise they'll be pretty once they're finished.:smile:
PM sent BartJ!
I'll have another update on tail light production this weekend.
Genuine Carbon Fiber Nose Cone
Genuine Carbon Fiber Front Nose Cone
100% Made in the U.S.A. by Koncept Cars. We use genuine high-strength...
Carbon Fiber Madness!
Carbon Fiber Parts Quote Request
We're still offering these lowering links. I'll PM you about ordering a set. Thanks!
Hellcat ordering suspended
It looks like Mopar is picking up the slack for FCA
According to reliable source oh2o, customers can no...
This morning's production: Modifying the 3D model for our production part in Rhino 3D. 5 axis milling is next! We're getting close and are trying...
We're up next for milling the tail light housing mold. We should be done by tomorrow morning or sooner. I'll update with pics of our progress....
We'd like input on which style TMC prefers. This helps us focus our R&D when we know exactly what we're building. I'd also like to ask,...
Thanks bonnie. Your install is on us! What price range is fair for the tail light redesign? This is considering an initial production run of 20...
Lowering Links - Model S
These Tesla Model S lowering links are adjustable. You can lower your ride height up to 1.5 inches for a sportier look...
Carbon Fiber Nose Cone
True Carbon Fiber Nose Cone for the Tesla Model S
Available with and without Tech Package
Finished in Satin or...
Credit to our new designer Alex Ramirez. He also finished the initial redesign.
Sam, we can finish the charge port door in CF fairly easy. We wouldn't need a minimum order on these. Kindly PM me when you can.
- - - Updated -...
Thanks all for your kind words.
bonnie, we're starting a design closer to the Model S tail lights. I'll update as soon as it's finished.
Thanks bonnie. A LA TMC member has reached out to us for test fitting. I'll definitely be in contact if we need further assistance.
19" HRE FF01 Wheels
Long a market leader in forged wheels, HRE now offers its FlowForm line of wheels for the Tesla Model S in 19". Does this...
We've received our order of carbon fiber to produce the first 20 tail light sets. The foam for the 5-axis milling is scheduled to arrive by...
I've included a link below to a gallery of Lotus pics for reference. Roadster fitments are similar.