Search results

My guess would be it's disconnecting the USB found in the glove box. But I think you have a newer car than mine and can't verify this.

Gen 2 installed with ease and I used the gen 1 cable as expected. Love this replacement.

Just wrapped up. Can't believe how easy that was. I used the USB cable from the original console and it fits as expected. I was a little scared when my teslausb wasn't immediately recognized and thought I had to go back to a regular USB, but I guess it took a little longer to sync with my server...

Nice, looks simple enough. Also the cable looks like it's a simple micro usb cable too. Nothing too special. I just swapped out the module, but TESLA doesn't provide you with the removal tool so I just used an alan key ... did the trick. Well tomorrow I'll attempt the swap and see how she...

Ah cool! I have the quote for the cable already so should be quick enough to order worst case. I just would hate to take everything apart to have to put it back in only to take it all apart after the cable comes in. Fingers crossed the original one fits from ver. 1.0 :)

It was 1/3 the cost that other are asking for. And I paid Canadian! If the original console has that cable I'll reuse it. If it doesn't fit, I guess I'll order one ... I think I priced that cable out ( 1100827-00-C) but since the numbers don't match yours, I guess I have the wrong part number.

Thank you for this Adam. I did have full intention of swapping out the card reader as per the instructions on this site. I just didn't know if others got new cards or not. I guess it doesn't really matter. As for the data module, I was able to order one directly from TESLA. I picked it up...

When you received your upgraded concole, did it comes with new keys? I just received mine and it came with cards. Also, I haven't looked yet but are the two storage usb ports data also?

Thanks for the reply. I'm getting quotes from Tesla for the part numbers you mentioned. Once they confirm the delivery times, I'll place an order for the 2.0 console, the data module and the data cable. Once all arrive, I'll see what I'm missing if anything and if needed, order additional parts...

Hello and thanks for this information. I'm going to be swapping g out a Gen 1 center console for the Gen 2 and understand that I'll lose the Data on the new console. My question is, did you order all parts from Tesla direct? I found that module on Amazon, but if it's the same price or cheaper...

Figured I would pile on here ... when I set my departure time, my car starts charging right away regardless if it needs the time or not. For example, I want to be at 100% tomorrow at 10am to start my road trip. The car starts charging right away and says it will be reached in 7hours on a 15amp...

You can check here also VIN Recall Search | Tesla Service

I think it[s powered until it goes to sleep. I have a raspberry pi in my conso0le and when the car goes to sleep, it powers off the pi. I think the only way around this would be to have a battery charge off the port and have your device plug in to that battery. Won't go forever, but will give...

Yep, my kids bikes are smaller, so don't look THAT bad, but essentially yes.

Ya I have the kids keep an eye on the bikes when we take them and it's been fine for the few short trips we've taken. I didn't want to move them in closer to center either because the MY is taller than say a M3 and I'm not so tall, so moving them in would be a PITA. I'm using the rail gutter so...

I have 2 1UP roof bike racks sitting on OEM roof racks on my Model Y. Because of the curve of the OEM rails, the bikes each lean out slightly. Has anyone added spacers to wedge the bikes straight or is this a real bad idea depending on how much it needs to be spaced to make straight? Attached...

No not yet. I tried to go in on an angle like others have suggested, but can't get it to work. Interesting that they're coming out with a proper model Y lock though ... I'm definitely interested. Thanks for sharing.

2121.4.12

Do all your features work? Mine did this after a reboot this afternoon. I started to have nav issues and ALL my personal settings were set to stock again. Also my FSD was disabled due to region. https://teslamotorsclub.com/tmc/threads/ui-change-after-a-manual-reboot.224783/#post-5435705 A...

Oh and since everything was reset, I was logged out of YouTube that was working until this point. Now won't log in :( I tried the plex trick but that's not working now either.

The map was showing as the correct location although I was getting an error saying the navigation needed Wi-Fi to update. A reboot solved both of those problems, but also changed the UI back to looking normal. The only thing I can think of is the last update Hung somewhere but didn't affect...

Maybe, but if you look at the writing below the toggles it says it's not available in my region.

I do have.

I think I got lucky. It got here fast (a week) and no extra fees at the door. For the platform rack it was a great experience. I also ordered two roof racks after I got the platform rack and those seem to be taking forever (ordered on March 12th and still no tracking number).

Just rebooted my car and noticed my UI changed. I also lost some features (see what's greyed out). I thought maybe it was due to my VIN being added to EAP (wishful thinking maybe). It also reset all my settings in the car. I had an error related to the navigation, so I rebooted again...

Thanks. I'll give it a try and if it's not to frustrating I'll use it as well.

In this scenario, do you have the lock face on the right or the left of the receiver? I'm guessing it's on the right (while facing the back of the car) allowing you space to get the key in to unlock it after use?

Thanks for the recommendations. Although I believe each of these (with 90' lock face) will work with the hitch receiver itself, none would work with the 1UP due to the smaller channel it has. Where a 5/8 (I believe) shaft will work with he TESLA, the 1UP will only accommodate a 10mm shaft.

Thanks for the recommendation. The angle would be right and would probably work, but a 5/8 (15.88 mm) shaft won't fit my rack. The hole in the rack is closer to 10mm. I had found one that was 12mm and that too was too big.

Has anyone purchased a trailer receiver lock for the model Y that fits in the available space? Looking for one to lock my 1UP bike carrier when on the car. The one that comes with the 1UP won't work due to the trailer wire plug. I'm guessing a 90 degree lock and a smaller shaft will be needed...

Has anyone ordered the 1UP to Canada? Just wondering if FedEX bends you over as much as UPS when bringing shipments over the border. I asked them if they could ship USPS but they said they don't.

Oh really? Interesting. Certainly makes using after market easier for sure.

Ya so if you want the car to know you're towing you need to have the SC code that in to the car. It turns off sensor and such when the trailer is plugged in. Also gives you (I think) break assist on equipped trailers. If however you're just using it for a simple bike rack, it's not needed.

Keep in mind the "hinge weight" as someone coined doesn't change. Therefore the number of bike won't change by using aftermarket. Though you will save a few bucks in you're installing it yourself. Not including the computer coding that's also needed

I just drove for about an hour to then from on FSD and noticed no real improvement or degradation to the use. Still impressed with it is what I'm saying, but this upgrade didn't have any noticeable changes.

LOL mine also. Never noticed until you mentioned it.

You have 4 speakers?

I have a model Y 15xxx and installed the update. No boombox option, I'm assuming due to the lack of speaker. I understand that all Ys came with the required plug so I have an email in to the parts counter for a price and availability on one. If not too expensive, I may retrofit. If anyone is...

I have the update but no "boombox" option. I assume because I don't have the speaker.

Us I assume ... I have an email in to the local one here for a price and availability. I'm also asking about the mounting screws listed on the epc site.

So I did the reset and recalibrated but my issue comes back from time to time. I had a Ranger) over who said a firmware update should be coming. The problem as I understand it is that in cold weather, the window drops a few mm in case the window frozen. It's meant to prevent damage by trying...

I'm guessing thereof be a lot of original model y owners looking to buy these now. We all have the wiring, just need to speaker. I'd buy one for the right price.

Mine (right rear) was doing this exact thing. The window looks closed when you look at it, but it you hit "window up" button it will move up slightly to only drop again slightly seconds later. A window recalibration seems to have remedied the situation so far. I continue to monitor.

Thanks for this! I just tried and now the window is staying closed. I'm going to monitor and if the problem stops I'll cancel my appointment. Might be worth re-calibrating all my windows in the am if this fixes my right rear window.

I just found a "how to" about this problem. They said to "- close the affected door - from the drivers seat close the affected window until it stops - from the drivers seat open the affected window until it stops" Apparently this recalibrated the window and corrects the problem. My window...

Mine (Model Y) is doing it now. I close the right rear with my app and it RE opens within 15 seconds on its own. It doesn't open fully, just a crack. I've submitted an appointment to have TESLA check it out. I'll add that this is a new activity since 2020.48.10 Update: I manually tried to...

Thanks for the link. Brian sent me this link as well. It shows how to remove it as one part but in one of his videos he actually separates the black top part from the bottom part and you can see the cross paternity of glue on the top "cap". There isn't a video where he separates that and I was...

Installing also. Not sure it's "the big one" but hey, what do I know. I'm just assuming the big one would be a version change. Probably just fixes but I'd be very happy to be wrong.

Has anyone seen a video on how to separate the piano black covers from the center console? I've seen videos on how to remove the center console, but I'm actually looking to remove the black cover(cap) from the lids ... if it's even possible. I've seen that i1TESLA did it and I've reached out...

The model Y has not such button