Search results

A bit of a fight why? Last time it was ~$800 for pair - how did you negotiate $350?

Not anymore. By the way i misread the post, since it’s a new car highly unlikely it’s half-shaft wear&tear

It does sound like a half-shaft wear. Don't worry I'm getting used to replace them every 1(hopefully 2) years. Once cold weather comes, they start clicking... This winter it's going to be my 2nd replacement of new revision half-shafts. Last time it happen, tech said that CV joint boot was torn...

Update: it’s not fixed lol :)

Great video, thanks for doing it.

This was really a day-1 issue for me, which was mildly annoying. SC told me a year ago that it's a software defect and they are working on it lol. Looking forward for the fix. Also TIL that you can use seat controls to move seat forward/backwards =)

To give another perspective, my 2020 LR+ with 20” wheels has lifetime average of 330wh per mile. It has 100kmh battery pack but I think our usable battery size is somewhere around 95kwh or so(+ degradation). This should give you average range of 287mi. In extreme cases driving in crosswind at...

i have it as well. Except for humming noise, no other issues. I got used to it .

I had similar issue from the day 1 - driver seat moves backwards when i move rear seat forward or back, i always have to click back on my profile to restore it. SC has always told me it’s software bug and I never had enough patience to insist on fixing it.

The end of story: one half-shaft got replaced due to torn boot.

Also, should we start new thread? 😂 The shudder problem: Current status (October 2022)

The noise came back for me as well, feels that with the cold :( It doesn't rattle on the hard acceleration, but rather on the sharp left turns, again similar, when I turn out of my cul-de-sac into the main road. There's no vibration, just the common noise for worn-down half-shafts. As car is...

So 2022.36.2 brings new energy app but apparently not for vertical screen vehicles. A bit disappointing. I guess we're minority now. /end of rant

Can't say that recent, but it appeared in the last few months. Usually the trigget is the oncoming car on the two lane road with the right turn

So from which version does tesla switch to vision only? I've got lots of phantom braking due to oncoming cars, wonder if that is why. I'm on 2022.24.6 MX Raven.

I'm just used to closing the door every time i walk by, but mine is 2020, so only driver's door and only with the fob.

Thanks, that what I was thinking as well. I don't have much experience with buying used parts for Tesla, so asked Tesla service about replacement, the current price is $1140 per glass, which seems rather reasonable to me, knowing all the concerns with used parts around deteriorating seals, so I...

Well, have to admit it finally happened to me. Rolled too much forward inside the garage and hit overhanging storage when opened FWDs. From the photos, what does forum think: does it need urgent replacement or ok to wait? Also what's the current replacement price? Worth doing it through...

You haven't listed charging, I'll assume you have a solution for that but if not, you need to. It's 220v Single-phase output there, so you would need some adapters to make it work at home. Supercharging won't work.

Which SC are you talking to? Why not just drop your car there and tell them it's unsafe to drive... That's what I would do if that's really the case.

I think that warrants a check with service center. With my very limited knowledge of how battery controller works, it does seem you have quite a lot of cells out of balance (Don't trust me). What I would do it try to keep car plugged in for much longer time and see if it can reach 100%?

So does anyone actually running always-on bluetooth odb2 canner? Any photos to share? Are there better, more compact adapters in the market?

To be able to read extra parameters when needed, through ScanMyTesla mainly.

What I've learned so far is that it's always on for MS and MX.

Tried searching through forum, but no luck. I'm looking at having an always-on odb2 adapter connected to my Raven model X. So far looks like I need - Cable harness HRN-CT06A11 - Geotab GO - Geotab Adapters - GPS Fleet Tracking - ODB2 bluetooth scanner, seems OBDLink MX+ is the most universal...

There is a 2nd ac compressor in 6/7 seater (pre-refresh), not sure about 2022 models

Can you use third party app temporarily ? 🤔 I never used them, so not sure...

There's more than that. Factory hitch receiver have a rear wall, so it's limited in how deep you can push the bike rack through. For example my Lolo 4-bike vertical rack have two pin holes and they recommend to use second one. Factory Tesla hitch receiver doesn't allow that because of the back...

Agree with all above except for this, I was driving with two MTBs without any problems. 4 bikes is where I wouldn't trust that hitch receiver.

Yeah, that just confused me even more. By the way center vents in the second row for some reason controlled by front zone, don't ask me why... I finnaly got heat fron the second row side vents by setting HI on both front and rear zone and setting air direction to front, very illogical but I'll...

I'm doing quite a lot of driving to the mountains this winter with my son and noticed that rear climate zone isn't providing any heat at all, while on manual Hi setting. Before I open service ticket wanted to check that it's not expected. Can someone else on 6 or 7-seater raven try the rear zone...

Well, I caught a hex key recently :D No idea how it got in...

2021.36.5.5 my "park assist unavailable" is back. Oh well, congrats me, i guess....

Honestly these are minor issues, but so are the features which came with recent software updates. At this point if you're not experiencing anything stated above I suggest to wait out and don't update.

All the mentioned issues slowly returned by the time i got to 32.10 :( as a reminder I've got sd card replaced around a month ago, so it's not a remedy. It does look to me as the issue is related to the high cpu usage on the MCU. Gor example garage door is much likely to close, if i am in Park...

They replaced sd card for me, but i'm still intermittently see same issues. At least the doors are opening from the first touch.

Thanks, would be good to watch if you can find time uploading it.

My issue went away on it's own on friday but they ended up replacing gateway sd card today anyway and redoing software update.

I had the unresponsive screen and garage door issues since the update and magically fixed itself on last Friday. I still have monile tech coming today with gateway sd card replacement, but it may be unnecessary. This is the second sd card i'm getting replaced and the last one fixed the issues -...

Can't you make one with few power walls? Probably going to be too expensive to justify... unless you already own a trailer which have space for powerwalls...

Search forum, that seems like a known issue after one of the recent firmware updates. But it seems the main indicator is "park assist unavailable" intermittent errror.

Anyone have experience with installing it yourself? Looks like i will need to take off rear bumper, I have never done it and I'm worried about breaking clips. Is there anyone who does reasonably priced installation in Seattle area?

All I want is to look into Wyze developer eyes after they read how their product is used. Nice idea.

Tesla moved my appointment to the next week, meanwhile i got notification about the software update. Has anyone tried going 2021.12.25 and has it resolved the issue? If not i'm going to hold off update until the issue is resolved.

It does very similar, there is another post where the issue was fixed by redoing firmware, see Park Assist Unavailable So far i've scheduled mobile service for this issue and will let you know how that goes. The most annoying thing for me is falcon doors which I now have to press 3-4 times to...

I wouldn't trust sensor too much. And by the way it's just one sensor in the middle between two falcon doors. I'm riding once/twice a week during winter in WA and usually just throw skis between seats from the back and it works fine unless you need third row. I'm planning to get rear vertical...

Nice!

Everyone needs to learn the wheel size reset technique these days. Looks like it's a software issue and I guess I'll just need to wait for a fix... has anyone else complained to sc about those issues?

Yeah - that is right. Carr wasn't detecting/reacting to the brake pedal, so no other way to perform deep reboot or turn on the car.

I had the same issue, and used wheel size trick couple of times. The issue ended up somehow related to the bad micro sd card used for software update, after mobile tech replaced it, never had the issue again...