Search results

Received my plates two days before my temp’s expired

Bought car on 3/3/2023, still waiting for plates and registration. Temps are set to expire on 6/3/2023. Contacted DMV and they said Tesla has up to 90 days to submit paperwork. Called Tesla, they said they submitted paper work electronically and its DMVs fault for long processing. Hopefully I...

Pm’ed also

These work with the cts-v version

#teamred #usshornet

There is some rim protection with the continentals. The 21" ubers are super stretched, definitely needs larger tires than the oem stocks.

I’m running square 19 x 9.5 + 30 wheels from Aspira af-10. With the stock Gemini tires 255 45 19.

Roads are pretty bad around here due to the rains in CA. The 19s help with the suspension

They set it for 10 front and 10 rear for my car. I changed it to 8 front to see any difference. Will try 8 front and 12 rear when I have a chance to remove the rear wheels

Got the opportunity to test drive the shop car at Zevcentric. It was so nice to be able to dial in the dampening settings on the fly. They also installed the flex z’s on my car but I opted out of the edfc at the time.

SOLD

Selling my unplugged performance rear camber and toe arms for Model 3/Y. Looking for $400 as a set. Local pickup preferred and shipping on buyers expense

Sold

bump still available

SOLD

SOLD

Selling my MPP front upper control arms for $900

Selling my Mountain Pass Performance MPP.R rear big brake kit which comes with jumper harness, rotors and brembo calipers with Pagid RSL pads. Looking for $2500

Selling my MPP Adjustable Sport Coilovers for Model 3 AWD/Performance for $1500. Parting out my model 3, and upgrading to model y. These have the new composite spacers which come with the gen 2 coilovers. These have around 25k miles on it. I prefere SF Bay area pick up.

brake pads. https://www.amazon.com/gp/product/B00559PCI6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Brembo 6 Piston Front Caliper Brake Mounting Bolts x 4 CTS-V Camaro ZL1 ZR1 Z06 | eBay bolts

sold

Still have them

Went the ERA2k spray route but bought them in red so didn’t have to spray as much.

been running ever since no issues.

Sold

Need to make an adapter for the calipers and we can go get a another group buy with girodisc for 394mm rotors 🔥🔥🔥

They are black hats, the upp calipers look familiar

Price dropped to $450 OBO.

He’s probably OCD about the top hat colors since the girodisc fronts are purple compared to the mpp blue anodized top hats

Selling my OEM 2020 Model 3 Base Front and Rear Calipers and Rotors for $500 I painted these in Red with G2 Caliper paint. Selling because I just upgraded to Front and Rear BBKs and no longer needed.

Selling my 18" 2020 Aero wheels with Stock Michelin Tires and Non Bluetooth TPMS for $800. Located in Bay Area. Comes with stock center caps and lug covers. Selling since these no longer clear my BBKs Two tires have 8/32, and two have 5/32 tread Two wheels have minor curb rash.

Selling my used Mountain Pass Page Mill Street Front Brake Pads for $100 shipped. This fits non performance model 3s Page Mill Street pads Installed a few months ago, lots of pad left. Upgraded to BBK so no longer needed.

It’s pretty tight but had to angle them certain ways but no stretching issue is the boot doesn’t allow for much rotation.

Just took a pic of my lines. Since I was swapping in the pagid rsl 29 pads

Finally getting the rears in with MPP.R rear bbk

Yeah my mpp lines were a bit tight also had to rotate it to fit

I had the same issue, I ended up buying a new drill with 1/2" shank since the standard drills are 3/8" shank.

had to make two cuts for mine but mimiced the older tesla version of the dust shield

To remove the dust shield you use a T30 bit to remove the 3 bolts. My front dust shields are enclosed, so I had to also cut them with a dremel. Otherwise you will need to remove the entire hub. Refer to video from MPP.

For rears, bought M3P rear calipers and going with MPP.R rear setup. Sticking with red for calipers. Running Motul RB660 brake fluid and will change pads over to Pagid RSL29s

No issues so far

I know there are some aftermarket wheels that are 18" and will clear larger brakes than these My wheel setup is 19x9.5 +30 on Aspira AF-10 on Hankook S1 Ventus Evo2 265/35/19 Aspira AF-10

I’m running 19s but when I have a chance I’ll toss on my stock 18s and see.

Here is a side by side with stock LR ones.

Some final pics

Pads go pretty close to the hat, had to make sure it didn’t rub after first installing. 😉

So received my rotors yesterday and installed the same night. Some installation notes everything went well as of fit with the rotors and calipers. The dust shield was a pain since removing the t30 screws the dust shield can’t be removed like the MPP installation video since it encapsulates the...

This looks interesting. Can we still get in on the rotors from girodisc