Search results

Yes, if feasible, it should always be done right. They weren't asking for right though, they were asking for decent and cheap.

Depends on your definition of easy. I would say it isn't difficult.

If the fender wasn't damaged I would say just buy a bumper off ebay for less than $1000. A really good piantless dent repair guy might be able to get the fender looking decent for a couple hundred. If you could live with that then you could DIY replace the bumper with the ebay bumper and maybe...

I have two sets of these two items (four items total): Model 3/Y Soft Closing Doors (MARK 3.0) Model: Model Y Model 3/Y Auto Present Door Handles Model: Model Y Finish: Matte Black Light: Blue I would like to sell them as sets, including both items. These are new in box. I purchased them a...

I had a model S loaner for free while it was being done, so it didn't really matter.

My wife and I each have a model y both on fsdb. Mine has the update this morning, her's does not. Don't know if it matters but I use fsd a lot more than she does.

Bump in case anybody is looking for a Christmas present for themselves.

Sorry, no. I will keep them at this price until I have time to install them at which point I will take the ad down. No idea how long that will be, but if I end up taking the doors apart to install I want to install both for my troubles.

My experience with them has always been that they will go above and beyond to correct issues even if they are not responsible for them, oftentimes providing multiple options.

Bump for price drop. $850 per set (soft closing doors and auto present door handles) shipped $800 per set if we meet locally in the Seattle/Tacoma area.

I have two sets of these two items (four items total): Model 3/Y Soft Closing Doors (MARK 3.0) Model: Model Y Model 3/Y Auto Present Door Handles Model: Model Y Finish: Matte Black Light: Blue I would like to sell them as sets including both items. These are new in box. I purchased them...

When I was living in a neighborhood it was nice to have the garage door opening without doing anything, keep my focus on the road and sidewalks for kids and pets. Now that I am no longer in a neighborhood I don't see the value anymore, I probably would not have paid for the homelink living...

I looked, nothing to change. The car will crank the wheel and start the turn and then disengage 1/3-1/2 way through the turn. It is also not smooth about transitioning into the turn and seem to end up wide somehow despite cranking the wheel early. By that point I am concentrating too much on...

Got the FSD Beta on my Model Y today. Not sure what my safety score was, just saw a firmware update and installed it without checking my score assuming it was just another standard update. My wife has a safety score in the low 80s on her Model Y (both purchased at the same time) and hasn't...

Was waiting for them to release for the Model Y. Ordered last night, they have 20% off right now.

I ordered some parts from Tesla Offer and they got hung up in customs. Apparently I have to fill out DOT form "Importation of Motor Vehicles and Motor Vehicle Equipment Subject to Federal Motor Vehicle Safety, Bumper and Theft Prevention Standards". I purchased the Frunk kit from Tesla Offer...

Sorry for the bump a few months later, but I figured this way people in this thread who were interested get notified. Tesla Offer is going to start shipping their soft close door kits (and also auto present door handle kits) for the MY in March. I have 2 on pre-order. I also have 2 of their...

Probably some federal guidelines that must be met for a horn that boombox horn doesn't meet (or Tesla can't guarantee that it meets) requiring the regular horn to honk when in gear.

Both of my vins are around 558xx

Only difference between version 3 and 4 was a latching sensor to make sure the hood loop is seated in the latch before pulling down. There were also inconsistencies in the manufacturing on Tesla's part. My two MYs are identical build and less than 50 apart for VIN and the lower threaded...

Thanks for making the trip up to Olympia. Hope you get your y delivered soon.

Use one of the scroll wheel buttons on the steering wheel to creep forward or back in tight parking situations.

I talked to them already about this bug. When the controller wakes from sleep it assumes it is closed. It is a bug they are aware of. I would think it would be fairly easily resolved on the MARK 4 opener with its sensor to detect where the loop on the hood is. Also the struts have two sets...

To be clear on my comments on the $250 install price point, while I wouldn't do the install for somebody else for $250 I also wouldn't pay somebody to do the install for me $250. Most of not doing the install for $250 is how beat up my forearms and hand are. Even with experience doing the...

Everybody is saying it is a 3 hour job because it is their first time installing it too, and likely anybody installing it themselves will be doing it for the first time. The second one I installed went much faster.

I put it on top of the wiper fill tube. The reason being, if something goes wrong and the frunk won't open I can easily get to it from the wheel well.

Agree, that would be fair. That being said I wouldn't do it for only $250.

Update the firmware. The first kit I installed closed during the initialization and wouldn't open due to the firmware that shipped with the unit being buggy.

Both sets are pending sale.

Another tip that made things go faster with the second set I installed. Remove the bottom ball bolt with the original strut still attached using an open-end wrench (after popping the top socket off.) Plenty of room to rotate the wrench and the bolt turns very easily after loosened. It was...

You put the file on a micro sd card (they say 32gb or less, I partitioned a 128 to 32gb) rename the file to update.yst and pop it in the control box when it is active (red light flashing.) The red light will flash fast while flashing new firmware and then go solid. Took like 10 seconds on...

Make sure you update it before closing the first time. I installed the first one yesterday evening. Followed the instructions including latch test and pushing the button to close. Closed perfectly and then would not open. After trying multiple things (one of which resulted in a paint chip...

I highly recommend this one: ThatGrin.com | Slipstream Bracket No Drilling Front License Plate Mounting Solution for Tesla Model Y Very high quality, easy to install and very secure. Thatgrin is also very good with customer service.

Yes, we have 2 MYs

Confirmed with Tesla Offer, just use Mark 3.0 instructions. One extra wire to the lock is the only difference for installation.

I could meet you in Olympia on the 17th in the evening. I will be driving through Olympia already at that time (the furthest point south I will be that day.)

Just realized that neither set I ordered came with install instructions. Guess I will follow the MARK 3 instructions online.

Mine got delivered. I only opened one of the two but everything inside looks new. Not sure if I will get a chance to install tonight or not.

Pictures attached per several requests.

This set: 2020-2021 Tesla Model Y Floor Mats Full Set Special , Save 19%

Haven't received email from TO yet, but did get an email from DHL today saying I have a shipment on the way from Hong Kong. I haven't ordered anything else that would ship from Hong Kong so I think it is likely the MY Power Frunks I odered from TO. Edit to add: Just chatted with TO and they...

Two full sets of the TESMANIAN Model Y floor mats. Practically new, each was used about a month and were also in the cars when they got detailed 2 weeks ago. $100 each. Just too slick feeling for me, so switch to the Maxpider mats. Willing to meet somewhere in the Kent/Auburn area. Cash only.

Pictures attached. It slides into where the bottom shelf slides in and then the bottom shelf slides into it. The top is pocketed and the bottom clips extend below the bottom of the spacer to match what the shelf itself is like. I printed it upside down with supports only from the bed using...

The charging coils on the Tesla pad are pretty low and the groove in the bottom ledge is too narrow for big phones with big cases. The result is the phone sits too high to initiate charging. I designed a spacer that clips in between the ledge and the charging platform allowing my phone to drop...

That is actually buy more save less (percentage wise) after the second tier.

Thank you for coming back to provide what you learned. I will have to give the Hornady safe a look.

Mine was badly off-center at delivery. The tech said they had to disassemble the screen and dashboard entirely to repair. They had my car a week.

Just to add more, I just picked up my MY form the first service visit. They didn't argue any of the items I listed for delivery defects, did excellent work, and even allowed me to add the HomeLink module to the service visit when it showed up 2 days later (they had my car for a week because the...

Just curious what date you ordered to get an idea where they are. I ordered on Oct 6th and no email for me.

There are also multiple Pi projects out there the will provide most of what Roadie does for free, plus some things it doesn't and the ability to more easily add functionality yourself. One of them: cimryan/teslausb