Search results

That will depend on your choice of shipping speed, but here's a link where you can add it to cart and it will show you the options: SnapPlate Front License Plate Holder for Tesla Model Y

If you want a plate mount you can take through a touch car wash, save your money and just use the factory adhesive mount. That's the only option that's going to be safe for the vehicle. Touch car washes have been known to take mirrors off of cars, so anything that's sticking off the car attached...

We feel pretty strongly that it's not a good idea to attach something made out of metal to something made out of plastic like the bumper and grille. When bad things happen, you're much better off having your license plate mount break or get stolen than having expensive damage to the vehicle.

The plate is in nearly the same position as Tesla's OEM mount, so if they're not concerned about the radiator, we don't think we should be either. Here's how you secure the SnapPlate to deter theft:

SnapPlate Front License Plate Holder for Tesla Cybertruck Install your front plate in seconds when you need it and easily remove it when you don't. Available at: SnapPlate Front License Plate Holder for Tesla Cybertruck

The plastic clip blocks moisture from blowing against that location on the side of filter body and developing that funk. It's not so much dependent on the slight lift from the clip.

NEW: SnapPlate➕ For Tesla Model 3 (Highland Refresh 2024+) SnapPlate➕ is our most rugged design to date. It's strength-optimized and ready to take a beating. SnapPlate➕ is available for Tesla Model S,3,X, Y, & Cybertruck. Available at: EveryAmp.com 💪Strength-Optimized Design Hardened features...

Here you go: SnapPlate Front License Plate Holder for Tesla Model 3

Unfortunately, until Tesla makes a grille that doesn't wiggle, anything that attaches to it is going to wiggle. If you're looking for rigid, the only thing I can recommend is the factory mount that is adhesive or screwed on, depending on your year. Other manufacturers like Polestar, Rivian, and...

Bummer about the accident but glad to hear the SnapPlate did it's job. Replacement parts are available on our website and in most cases the repair is only $2-$15 + shipping. Parts Catalog

Our service center in San Luis Obispo, CA has two demo Highlands. Stealth Gray and a Black.

SnapPlate Front License Plate Holder for Tesla Model Y SnapPlate front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the Tesla front end when it’s installed and leaves no unsightly hardware behind when it’s removed. The plate mount...

Your concern matches ours and that's exactly why we created SnapPlate back in 2019. We designed SnapPlate with vehicle and grille safety in mind with engineered breakaway features at the joint and rear tabs. These features keep your car safe and repairs at $2-15 vs ~$800. Dated but still...

A word of caution with those metal knock-offs of Quick Bandit's patented design, is that you're attaching a metal mount to a plastic grille. A strong enough impact will likely cause grille damage, leading to ~$800 in parts and labor to replace. We designed SnapPlate to break away as a safety...

This thread is for the general discussion of the marketplace listing Cabin Air Filter Moisture Barrier Clip (Bad Smell Preventer) for Tesla Model Y and 3. Please add to the discussion here.

Full Blog Post here: Tesla A/C Smell That Wouldn’t Go Away – Finally Fixed Highlights: After extensive testing, YouTuber Adam Davenport found that a plastic clip on the bottom of the Tesla Model 3 or Model Y cabin air filter helps keep moisture from saturating the filter and causing that foul...

Strength-Optimized Front License Plate Holder for Oct 2021-2024 Tesla Model X - SnapPlate➕ SnapPlate front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the Tesla front end when it’s installed and leaves no unsightly hardware...

Safety-Optimized Front License Plate Holder for 2017-2023 Tesla Model 3 - SnapPlate SnapPlate front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the Tesla front end when it’s installed and leaves no unsightly hardware behind when...

This thread is for the general discussion of the marketplace listing No-Drill Front License Plate Holder - SnapPlate by EveryAmp. Please add to the discussion here.

After many requests, we've updated our center console dock adapter to work with a Lightning to USB-C cable that a customer found on Amazon. It's a bit smaller than the standard Tesla USB-A cables and the 27W-capable USB-C cables we supply, so the kit now comes with a revised adapter and shims to...

I'll pass it along. Have you tried asking service for one, even to purchase? Just because its not on the website doesn't mean they are opposed to selling you one. May even just give it to you.

I know you said brushed metal but I can say we are using this satin black on our white Y with SnapPlate and think it has a nice finished look. Satin Black License Plate Frames You can use coupon code "LivingTesla" for a discount as well.

I made an adapter for our Model Y that works with Tesla's lightning to USB-A cables and also some 27W-capable USB-C to USB-C cables we were able to source. It works along with Tesla's wireless pad, so should fit your and your wife's needs with one of Tesla's lightning to USB-A cables. We'd love...

Should be fine. Some people put a square of film just in that area to make it easier to remove the plate in the future.

No, but thank you! We got it all going: SnapPlate Model S Front License Plate Mount by LivingTesla

Being very familiar with all the options out there. The only one we'd recommend to go through a carwash, even touchless, is the factory OEM stick on plate holder. Even touchless have metal bars that can get very close or blowers that will pull on the plate.

LivingTesla Model Y Hitch Cover Tools by LivingTesla posted Oct 19, 2020 at 11:27 AM With the right tool its not too bad. This is with all the clips still in place. Even easier with them reduced.

LivingTesla Model Y Hitch Cover Tools by LivingTesla posted Oct 19, 2020 at 11:27 AM They do make it pretty easy.

LivingTesla Model Y Hitch Cover Tools by LivingTesla posted Oct 19, 2020 at 11:27 AM It's not too bad with the right tools. We also modified our further by removing all but four of the clips. (Optional simplification)

Our Model Y hitch cover removal tools are the right width, length, and thickness to mate right up to the hitch cover clips and make them easier and safer to remove. They come as a pair, fit well in your hands, and are small and easy to keep handy in the car.

As has been mentioned by others, don't skimp out on a quality flash drive. Not all flash drives are the same. You really want a high endurance drive, designed for the heavy abuse of dashcam use. We broke all this down plus more in our dedication TeslaCam/Sentry Cam post. Reliable...

Since we're on the subject here...:cool: We're having our biggest sale ever! SnapPlates are $20 off through Sunday 10/18. No Coupon Necessary http://LivingTesla.com/shop SnapPlate is designed, printed, and assembled in California, USA. All products are in stock and typically ships within 24...

Since we're on the subject here...:cool: We're having our biggest sale ever! SnapPlates are $20 off now through Sunday 10/18. No Coupon Necessary http://LivingTesla.com/shop SnapPlate is designed, printed, and assembled in California, USA. All products are in stock and typically ships within...

You're not the first to report that problem. We've seen it on some Model 3s as well. It doesn't affect everyone so that's odd. There must be some metallic property to the sticker or just purely selective placement. When designing the SnapPlate we had to account for where the physical metal...

Appreciate the kind words and glad to hear you've had a great experience.

Abstract Ocean has some nice OEM style emblems that you can use to put them back if you so choose.

Shoot us a DM or E-mail us ([email protected]) with a mailing address and we can double check those international rates.

We've been running with all but 4 tabs removed from our hitch cover for a few months now with no issues. Makes it much easier to remove, especially with the hitch cover removal tools. LivingTesla Model Y Hitch Cover Tools by LivingTesla posted Oct 19, 2020 at 11:27 AM

You can replace the bottom bar and turn your dock to both wireless and high speed USB C wired with our conversion kit: Wired Phone Fast-Charging Kit for Model 3/Y

Yes that is the screwdriver we provide with the SnapPlate as well as silver and black screws for optional plate mounting. SnapPlate Spare Parts

We specifically designed the SnapPlate base to only cover the area of the grille where the louvers don't open. We're actually the least intrusive option in that regard. If you look past the outer grille there are louvers that control air flow to the radiator. You are right that a metal plate...

We're personally anti front plate Tesla owners in California. In our county the front plate law is not enforced at all. But when you go to places like San Francisco or Los Angeles they are all over you. A couple years ago we were in the city and got a ticket for not having a front plate. That's...

Both SnapPlate and Quick Bandit are great options with very similar features. You can't go wrong either IMHO. Just for clarification, the SnapPlate does include an optional security screw and driver to prevent someone from removing your plate. But the way the actuator works is not obvious to...