Search results

Will these fit model 3?

I’m just looking for 1 piece not to have the line in the middle and something to cover the side door wood trim they added in 2021 model

Is there something nicer that the wood trim can be covered with? Also the side wood trim pieces. I’m looking for 1 piece and prefer not to pay over $150

I got my vin and my delivery says aug 13-15. When will i be able to schedule pickup?

How is your range before and after? Which 20x9 did you install?

How much range loss is there with tst rims over aero rims?

I’m thinking of replacing the standard model 3 rims with 19 inch or 20 inch TST rims. How much range will I lose? How rough will the ride be?

How do you get the 44k SR?

They did not want to talk to me at all until pto

Yes just flip the breaker off and back on, no need to wait a minute

Reset the inverter during peak production around 1pm and then connect to the interface and you will likely see the following error when it resets again. Usually for me it happened every 15-30 min.

This has nothing to do with the CTs, this is a production issue which is caused by a bad inverter. I had the exact same issue, you will need to have the inverter replaced. Unfortunately they will likely not help you until you get PTO.

You have a bad inverter. I had the same issue and its due to the inverter over heating

I have only tesla solar panels and no battery. What happens if there is a power outage in the middle of the day? Will I still be able to use whatever amount the panels can cover?

Mine has SSID starting with pwr. Are you able to see the neurio wifi SSID on your phone when you are next to the tesla inverter?

Yes it is but I don’t see any security concerns with that. Worst case someone will have access to my electricity usage

Neurio broadcasts its SSID when intially powered ON and has no wifi passcode. During that time period the wifi extender is able to connect to the neurio wifi network and then extend it.

I bought a tp link range extender and extended the range of the neurio and now it seems to work well. I originally tried extending the inverter wifi range but that didn’t work. When I setup the tp link it shows all the wifi signals in range including the neurio and inverter

I was thinking the wifi extender could broadcast either the tesla wifi or the neurio wifi signal, not sure if that will work. Another option might be to run a long extension cable but the antenna to get it inside the garage where the inverter is located. The garage door has insulation and maybe...

I did that as well but still the connection is poor. Can a wifi extender be used with this?

Does anyone have any suggestions how to improve the wifi signal when the neurio and tesla inverter and far away from each other?

Thanks for the tip, this seems to be working

My third tesla inverter is finally working, this is a sunny day. Seems to be clipping a bit

I also tried this

This is how mine looks now. I also tried flipping them both 180 degrees.

If possuble can one of you take a picture of your CTs

When I tried rotating one and moving ct2 to ct4, I saw negative number even though it was night time and solar was generating nothing. I tried to rotate the other one also and swapping ct1 and ct4. I asked the tesla tech when he came to replace my inverter and he said he didn’t hear of any issues

Got my third tesla inverter and finally its working. Looks like the system is clipping a bit but today was clouds on and off so hard to tell

Do you mind sharing a picture of your setup? I couldn’t get it working

Elon should hire the people on this forum to do the support

I can tell you that my tesla inverter sounds very loud when it runs and raises the temp of the garage by several degrees.

This is how my CTs look. Do I rotate one of them 180 degrees to make it “backwards” as you mentioned

I use turbotax so don’t have a tax guy

Both

If I recently got solar and trim a few trees to improve production, can I claim 26% fed rebate on the amount spent?

Not yet, will wait for my new inverter first. Don’t want to touch the system and then have them blame me it

I have this issue as well. Called tesla but they had no clue. Will try the fix. Do you turn off any breakers when rotating the CTs

It shuts down due to over heating usually when its producing over 4kw. This will be my 3rd inverter in 2 months once they replace it. About 3 weeks wait each time its inside the garage. I can hear the fan running, the metal part inside the inverter feels very hot. Its a 450 sqft garage with 8...

It shuts down due to over heating usually when its producing over 4kw. This will be my 3rd inverter in 2 months once they replace it. About 3 weeks wait each time

Mine can’t even handle 78 degrees

Tesla tier 2 support thinks its a cooling issue with my inverter. Really strange that its two inverters in a row with same issue. if they want to keep spending money giving me new inverters every month and having to pay the service tech to keep coming here that’s fine but I’m skeptical that’s...

Yes I had it enabled and then it disappeared after I got the new inverter. Will call them

Where is the service option in the app? I think its not enabled for my account

For those of you with a neurio device do you an option in the app to request a service tech? I used to see it on the page with solar production graph but now its gone

Can you expand on that. All the strings seem to be producing something, I assume if they were not wired probably they would not produce?

I have a thermostat in the garage and it reached max of 78 today. I left the inverter door open but still the issue happened. I also tried leaving the garage door open. Fan turns on. Yes second inverter

Looks like the issue happened even with string 3 disconnected but took longer. I don’t know how tesla will figure this out. I kinda wish i didn’t go with them now

So I disconnected string 3 and now the issue is not happening. How to troubleshoot this further? I’m assuming its due to the high voltage on string 3. Is 12 panels on 1 string too much?

I have shading on string 3 until about 11am