Search results

I have 2 wall connectors gen 3. On the side of my garage closest to the panel, I have #6 stranded on a 60amp breaker. The wire length is roughly 8ft. On the other side of the garage, we recently opened the walls to run a conduit inside. We used #2 stranded to future proof. it fits with no...

It seems the API myQ uses for its official connections: amazon, home bridge, Tesla - is different than the api used on their website/app. The website/app can be used through a homebridge linux plugin to pull anything from the myq website/app into apple HomeKit. I hope the devs over there...

This is 100% a myQ issue. Same exists with myQ's homebridge. I have my garage door and gate paired to the device. They both show up in the myq app but only my Garage Door shows up in my Apple Home app. It won't show the gate for some reason.

my settings are working nicely so far. my house has been grid charging at 8am. I've noticed the batteries charge up to about 50% and then the rest is charged over excess solar produced. I'm at 100% long before 4pm. then the batteries power the house and dump excess perfectly from 4-9pm. When...

Checked again today - I've now sent 90kwh back to the grid during mid peak. my Bill estimate from yesterday to today lowered from 36 to 32. I use a lot of energy in off peak and super off peak so I'm wondering how this all balances out when I eventually go over the limit. I'm going to keep...

Impressive math. I checked my usage for the week and for yesterday alone I sent 39.47kWh to the grid during mid peak. So it seems that I should maybe stick with this and once its sunny enough, turn off grid charging to allow the PowerWalls to charge up from the sun and then export everything -...

how do I view my monthly cap? where is that on the bill? this is the kind of info I wanted to know - like is there a downside to exporting so much to the grid during peak?

My last 12 months electric bill with SCE was around 1300. For that last year, I had 10.2kw solar system + 2 PW2. I was using TOU mode all year with no changes to the setup. I'm on TOU-D-PRIME. I'd like to get my bill to or make money back. I recently added 2 more PW2. So now 4 PW2 with my...

everything went offline because anything switching from wpa2 to wpa3 needs to be reconnected with the password and all. they don't just auto switch over. so if wpa3 is now working on the wall connector, we still don't know yet. but it's nice to see that wpa2/wpa3 is working.

I received I'm not eligible after trying to enroll. I have 27 sunpower panels and 2 powerwalls in SoCal.

Further testing - the channel for 5ghz matters. My Sunpower PVS6 and Powerwalls might have the same wifi chip. Neither of them like the 5ghz UNII-3 channels. I tried using channel 149 and they both went offline. Switched back to channel 36 and they picked up right away.

I've tested this quite a bit: Powerwall 2- it uses Wifi5 according to my Unifi setup. It will connect fine on any network that has 2.4 and 5ghz combined. It will prefer 5ghz. No need for band steering. It does not like DFS channels. If you have DFS on, it will not connect to 5ghz. For the...

would love to know this too. 2022 MX here.

So I've had the car for a few weeks now and I must say this - there is no way in hell this car gets 300 miles of battery range. Granted I have the 22s but my car now has 390 miles on it and I've charged it 3 times. The first time was when I bought it. It was at around 70% and I charged it to 90%...

Tint all done today at RPM Tesla. 20 front, 40 all around on the factory smoked, 70 windshield.

I’m also getting the chrome emblems changed to black and getting the headlights smoked.

I've had my Plaid for over a week now. I love it. I sold my Cayenne to Carmax and I'm done with ICE. Dropping off my car to RPM Tesla tonight for 3m crystalline tint. Doing the whole thing - 40% on the smoked windows, 20% front, 70% windshield. This car has been fantastic to drive around in...

I picked up my plaid X on Tuesday. love this car. its so much fun to drive and I'm so glad I got the plaid model. the power in everyday driving is phenomenal. the launch is nice but I'm more excited about the daily driving power. car feels like a spaceship. getting my tint done next week at...

Getting my Model X Plaid at 4pm today.

Got my vin yesterday for fully loaded plaid x. Delivery Thursday. I’m in Newport Beach.

picking up my model x plaid on Thursday! just got the text.

I needed to swap my 18 foot cable wall connector for the 24. Installed it again and noticed it has a newer firmware 21.36.5. Tested my wpa3 network and it still didn't work.

Manual clearly says: Wall Connector only supports WPA2/3-secured, 2.4 GHz, 802.11 infrastructure mode networks. NOTE: Hidden networks are supported. NOTE: WPA enterprise will be supported in a future firmware update. Has anyone tried WPA3 only? I wonder if that works.

Just installed a Wall Connector for my upcoming Plaid X. I have a Unifi network and had to create a separate SSID that uses only WPA2 because WPA2/WPA3 transition doesn't work for it. Its weird because on WPA2, I set PMF to optional just like transition mode as well as Group Key Interval - it...

I ordered a Plaid X a long time ago. It slipped from October delivery to January. Now it doesn't show a delivery date on the page.

Ordered my first Tesla last week: Model X Plaid White Black Int 6 seats 22s FSD Estimated delivery is Oct/Nov

I ordered the new Plaid Model X. Total with delivery came to about 150k. I'm in sales and use the car for traveling to client meetings so hopefully I can use section 179.