Search results

Thanks for the information. I assumed that it would be OK, but you know what they say about assuming. Yup. It's on a 60amp breaker here and will be there as well. I had not considered that but as it turns out it will not be an issue.

I will be moving my current Wall Charger into my new home prior to the activation of the internet/wifi. The internet service and associated routers and AP's will happen a couple of later. Can I still use the Wall Charger prior to the availability of internet? It does not appear so but I...

Stopped by today (Oct 25) and they are busy removing a section of the parking lot next to the chargers. I have no idea why.

Stopped by today (7/24/23) and the construction screens were down and it appears to be close to completion. There are 8 stations but two of them have a new configuration I have not seen before.

Interesting. So when I do a back-up and restore, what is being backed up?

What happens to the data that is collected while the car is not connected to my network for extended periods of time? In my case the car will be gone from home for about 3 weeks. Once the car is back on my network should I expect the data for the last three weeks to be present or will there be...

I was planning on doing the upgrade to my Pi 4 this Sunday. I may want to rethink that plan, and if I do it won't be headless.

Just completed a "Test Case". Charging: No Temp Data Post Charging: No Temp Data Post 5 mi drive: No Temp Data. "Drives" shows Driver/Passenger & Inside temp

Great idea..... But the Pi time is correct and Teslamate is set to the correct TZ. The charge display shows the same time as the Pi. (UTC-8)

Thanks for your efforts. BUT if I check the overview after returning home all the stats are correct EXCEPT temperature which is still showing No Data. Where is this data stored? Is it in a human readable format? What about the the scripts that run to create the dashboards. I tried finding...

Not exactly sure what you are wanting me to do. The Teslamate page is able to display the temps, current software version, status (sleep, online etc) and status of the windows (vent) accurately.

Thanks for your effort(s). As a foot note, The temps were showing correctly until about a week ago when I update the SW to 2021.44.30.5. About that time they disappeared along with any and all data (charge, temp, SW revision, mileage etc. I first noticed that he SW version was not shown...

From the Teslamate Home page (4000) ---------------------------------------- Lucille Model Y LR AWD Status falling asleep for 2 min Range (rated) 181.1 mi Range (est.) 169.1 mi State of Charge 56% (57%) Outside Temperature 58.1 °F Inside Temperature 60.3 °F Mileage 4413 mi...

BB King, ya betcha. It's not a guitar, but it is blue.

And the temperature curves.

I have not made any changes to the data base. I have driven the car but the temperature is still missing. The temperature is shown on the Teslamate page 4000. I have attached the Log file. Not sure what it all means though.

Here ya go.

Should have mentioned that the Teslamate Home screen "4000") shows both the Inside and Outside temperatures.

All three "Dials" are the same. "No Data" no matter what time period I have the display set to.

I just did as you suggested and it seemed to "mostly" work. I was having a problem with the dashboard not updating since last Sunday so I did the following: - shut down docker -- docker-compose down - edited the YML file to use 1.25.0 - pulled the updates -- docker-compose pull - Started docker...

Mine also seemed to have expired. I was blaming the latest SW download (2021.44.30.5) which was loaded Jan 12th but maybe you are correct. My Pi 4 isn't exposed to the WWW world so it should be secure. I can only access it from my home network. What are my next steps to get Teslamate back...

That is a valid place to look, assuming that you receive every update. I went from 2021.4.21 to 2021.32.22 earlier this year. I assumed that the release notes would only cover the changes from the previous released version. Thus I need to review the release notes for (major releases only)...

But doesn't that listing only show the changes from the previous release of that version of the software? How do I determine what changed when I upgraded from version 2021.32.22 to version 2021.36.5.1?

Worked great. Thanks for posting. I did the full uninstall of the teslamate database (as you've shown above), modified the docker-compose.yml (database: section) as suggested and reloaded teslamate. Bumped into the Recaptcha error but I finally found a token generator that worked so I'm in...

Can you share what you learned about getting the API token? I made it past the Teslamate WEB failure and now I'm fighting the Recaptcha error. Tried a couple of different Token Generators, they failed saying that Tesla did not respond properly. Going to the Tesla web site and logging into my...

What was the problem and solution? I hope to be testing the solution later today and thought I would ask, just in case.

Thanks for the pointer and information. I'll give it a try later today do to family obligations :-} .

Yup. A virgin build. Load OS on an SD card, boot Pi, load newest Rasbian OS. Loaded docker. Docker seems to be OK since running the Hello-world is happy. Made ~/Docker/Teslamate directory Copied docker-compose.yml (I assume this is what you refered to as the docker config file?) from the...

Thanks for pointing this one out but I am not too hopeful as there has been no response for 11 days. At least we know that there are three of us with the same problem. I doubt that we all made the same mistake so it looks like something changed in the setup files on the Teslamate site or in...

Just noticed that I entered " DATABASE_POOLSIZE=10" missed the "_" in POOL_SIZE. Looks like the same failure though. Ctrl_C'd out. from the screen database_1 | 1970-01-01 00:00:00.000 UTC [33] FATAL: database "teslamate" does not exist database_1 | 1970-01-01 00:00:00.000 UTC [34]...

I stopped (^c) the "installation" as it did not appear to be making any progress. Also I no longer have the graphics WEB page.

Lots of errors: (appears to be data base 'teslamate" does not exist) - Added "- DATABASE_POOL_SIZE=10" to the environment section of the yml file - ran "docker-compose down -v && docker-compose up" As soon as the installation process end, it seems to be in a loop...... I'll send the log files.

Like this..... :-) Lots of FATAL's

In ZIP format.

The one I used was copied from the Tesmamate Docker install | TeslaMate page. No intentional changes. Shall we take this off line. If so message me and I'll send you my email.

The first error: [[36mteslamate_1 |^[[0m waiting for postgres at database:5432 ^[[36mteslamate_1 |^[[0m 2021-10-21 18:19:45.844 [error] Postgrex.Protocol (#PID<0.166.0>) failed to connect: ** (Postgrex.Error) FATAL 3D000 (invalid_catalog_name$ ^[[36mteslamate_1 |^[[0m 2021-10-21 18:19:45.844...

Did a clean OS build and OS updates. No additions (except for the .bash_aliases file). Reboot. Completed the Docker install, no errors reported. Reboot. Completed the Teslamate install, no errors. Reboot. Open the WEB browser..... IP:3000 Grafana OK IP:4000 "This site can not be...

Removed the pi version. That also removed the yml file from the pi directory. Rebooted and now the :3000 and the :4000 are refused. Currently reformatting and rebuilding.

Ran the command and the following lines were at line ~83+ of 110,000 lines. Looks like a from scratch build is in my future. ^[[36mteslamate_1 |^[[0m * The database does not exist ^[[36mteslamate_1 |^[[0m * The "schema_migrations" table, which Ecto uses for managing ^[[36mteslamate_1...

I do not have the file "docker-compose logs teslamate". Only "docker-compose" which is a small python3 script.

docker container ls CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES d39e7725264a postgres:13 "docker-entrypoint.s…" 47 hours ago Up 47 hours...

Yup Actually I installed the Apache 2 prior to the docker install from the listed page. Is that a conflict?

I installed based on the instructions from the Teslamate (Docker install | TeslaMate) instructions and yml file. Where are the Teslamate or Docker log files located? I was unable to find any files with teslamate in their name and no obvious docker files. One docker.conf & docker-ce.conf but I...

pi@raspberrypi:~ $ df -h Filesystem Size Used Avail Use% Mounted on /dev/root 30G 11G 18G 39% / devtmpfs 1.8G 0 1.8G 0% /dev tmpfs 1.9G 9.8M 1.9G 1% /dev/shm tmpfs 1.9G 113M 1.8G 6% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock...

That is what I was referring to free memory of 3G. I have a 32G with just the standard OS. The meminfo file shows 3329784 kb in MemAvailable. I would be surprised if I am running short.

Whoops. Forgot to mention that the system is a Pi 4 with the latest Raspbian with 3GB of free memory.

I am having problems with my TESLAMATE installation. The first time I loaded it, I was getting all sorts of permission (SD card failure?) and lost file errors. Built the system from scratch (new SD card) and now I am unable to get to the TESLAMATE web page. - Reflashed the system - Reinstall...

I noticed that now even trying to update the OS (sudo apt update) I get the same errors. Something somewhere appears to have been corrupted. I don't look forward to rebuilding the system. Suggestions?

I am have issues installing the docker application. - I updated the OS on the Pi 4 B and rebooted. - entered curl -sSL https://get.docker.com | sh It begins to execute the Docker install script Then fails E: Failed to fetch https//ookla.bintry.com/debian/genertic/InRelease 403 Forbidden [IP...

Here is the installation instructions: https://www.tesla.com/support/installation-manuals-wall-connector