Search results

Interested if you still have them. Sent you a pm

Are you still selling the lift kit? How much are you asking?

Looks great! How much was the install and alignment from them?

I've noticed while driving my wife's Model Y LR, whenever a car passes me on the driver's side on the freeway, there's a noticeable cold draft. This doesn't happen in my model 3 (or any car I've driven, and I'm not sure if this is normal with the Y.

I was watching from the rear of the vehicle, but it did look like he was prying something on each side as depicted in the instructions.

Well I was actually watching him the entire time because I had forgot my keycard at home, so he needed me close by to operate the vehicle. I'm not sure what goes into adjusting camber but he did take the frunk liner out and was wrenching on both sides in addition to the rear shroud and wrenching...

Is this something worth fixing, or the amount of camber not worth the cost/hassle? I'm not that mechanically inclined and not sure what needs to be done to shift the subframe and how much it'll cost.

I just got a set of MPP comfort (non adjustable) coilovers installed and gotten alignment shortly after. Drop was about 1.4". The front left camber was a full degree different that the front right, and the alignment technician asked if the car had been in an accident. Is this something I should...

Kansei KNP 19x9.5 +35mm on Michelin Pilot Sport 4S (265/35/19) Lowered on MPP Comfort coilovers

His PC for the stop is tint and no front plate. Most agencies ask that their officers give the reason for the stop within the first sentence, but it's not required by law or anything like that.

I'm assuming that's a cover? Unfortunately that's why I'm trying to trade the wood. The dash covers (cf, painted, etc) block the vent output. So I'm looking for either the white oem or a dash replacement as opposed to just stick on cover.

Looking to trade my 22 model 3 wood pieces (dash and door trims) for 21-22 white dash and door trim. I can throw some cash on top. Located in Sacramento.

I have a set of MPP coilovers for my model 3 that I would like to have installed by a shop, as I'm not mechanically inclined when it comes to suspension. Anybody know any shows in the Sacramento area that have experience with teslas?

So I won't be able to get my car lowered for a while. Do you guys think I'll be able to mount the above configuration without rubbing? So basically stock height with 19x9.5 +35mm wheels on 265/35/19 rubber on a model 3 performance with 3mm spacers/stepped lip eliminator.

My M3P was getting it's windshield replaced so I had them check out the usb issue. Of course it works perfectly for the two days my car was at the shop. They could not replicate the issue. And of course once I get my car back, it starts up again. Doesn't matter if its an SSD, factory samsung...

My M3P was getting it's windshield replaced so I had them check out the usb issue. Of course it works perfectly for the two days my car was at the shop. They could not replicate the issue. And of course once I get my car back, it starts up again. Doesn't matter if its an SSD, factory samsung...

The long burnt rainbow ones

Any idea when the pentalug set will be back in stock?

I just purchased some Kansei KNP 19x9.5 +35mm wheels for my M3P. I should be running 265/35/19 tires correct? Should I run spacers at all if I'm trying to go for a nice flush look? (plan on lowering about 1.5-1.75" on MPP comfort coils. I already have the Performance Hub Stepped Lip Delete Kit...

I want to do the same, but had a hard time finding examples

I'll take them if they are still available

How much for the foglight trim if purchased seperatly?

Wow that IS cheap. How is ground clearance? Do you know how much it lowers the front end by? That's my biggest concern since I'll be dropping mine pretty soon.

Do you have a link?

It's funny I initially bought the focals because i thought they would be the easier install vs the dash speakers, but it sounds like it's just as equally annoying. Too bad about the single infinity driver, as I had just purchased the brackets for the other recommended alternative for the dash...

Just get from Aliexpress or Ebay. Nearly all of the ones out there are just chinese ones significantly marked up.

Lol was hoping for some non-bagged testimonials. Love the Kansei wheels btw. I'd probably be rolling on some if they made them in bronze for the 19" size.

I actually disliked MSM initially, but thought it would be the best color if I decide to wrap my car later on (wasn't gonna get another black car). I've actually grown to like MSM the longer I own it, and will probably skip a wrap. I personally think Tesla's white is their best looking color...

Anyone running 19x9.5 +30mm on an M3P? Lowered or stock height? Wondering if i'll be running into any issues.

Great idea, I didn't think of the meter!

So I have to park my Model 3 outdoors for the next few months, and I have a Tesla Wall Connector that is installed on the interior of the garage. I'm currently running the cable under the garage door to charge my M3 each night. I was getting tired of having to open/close the garage each time, so...

Can you send shipped prices for each item and for both to 95757?

So I went ahead and bought some Focal ISU 200 components and the NVX subwoofer kit, but have not installed them. Was going to install them first, and maybe consider the dash speakers, but now I'm thinking of getting infinity/faital dash speakers and just doing it all at once. I'm wondering if...

Curious if you ran into any issues with the power trunk. I want to get a cf trunk for my model 3 but I'm afraid of possible issues with the power trunk.

Just picked up my m3p today and my car did not have usb c ports in the center console

Good to know, as I have an incoming 2022

I plan on installing coilovers on my incoming m3p, but won't know when that'll be. If I was to get wheels first in anticipation of a lowered fitment (19×9.0 et30-33 with 245/40R19 tires), Will I have any issues running them on stock height until I am able to be lowered? Or should I lower the car...

Do you have a link? I'm having a hell of a time finding them. Most want you to email them to inquire about a heated function.

Yes, I said until at least Nov. 1st

Haha I'm from Sacramento CA so probably not mines. I got notification to get ready for delivery in early October

Lol I am one of those people. That was my configuration. Decided to try to hold off my delivery until the 2022s are rolled out.

I changed to the performance but have not taken delivery. I delayed my order because I need to make some space in my garage, so I have not taken delivery yet. Good to know about the ride quality, as I was pretty sure that I was going to get aftermarket 19s, but may just stick with 20s if there...

Any updated pics? I'm looking to change my order to blue, and that's the same kit I want to get. You may push me over the top.

I'm in California so I don't need a set for winter.

Your point about the boot upgrade pushed me over the edge. Just changed my order :D

So I've ordered a LR AWD in August, and while I haven't received a VIN yet, the delivery date shows September 15-30. I went with the LR AWD because I had initially felt that the Performance wasn't worth it because I'll be changing out the wheels and spoiler anyways. However I'm doing the math...

I've used G2 paint on my previous car (2015 Mustang GT) and had great results. Looks pretty good 6 years later. I too am curious if cheaper alternatives look just as good.

I haven't received my vin yet, and I was thinking about making some changes. Currently have white on white, but I'm debating switching to black or blue on black. I ordered on July 16th, before the price increase. Would that mean if I made any changes now, I would have to pay the higher updated...