Search results

One more of the new VTForged setup!! Cannot wait to get these on our acid green X Plaid!

Little sneak peak of the VTForged GT-S/RS 22's coming for my wifes X Plaid build! Went really aggressive on these, 22x9.5 +15 / 22x10.5 +20 Follow the build on IG @vipertoad @VTForged

Hey guys, so trying to solve all the little issues we're having with the 22 Model X Plaid. Seems like every time we get in our 22 MXP, the streaming radio says "Unable to log in. Please try again later". So annoying as that's 99% of what we listen to in the Tesla, and when you don't have music...

Those are pretty cool, good to know that they work well with my guards!

My guards work great for lowered cars! Mine is pretty low at -10/-11: Untitled by Toad, on Flickr

Lmao this ^

I believe it's a LiftMaster 8550 (it's less than a year old, has the MyQ WiFi stuff and all the new garage door tech)

The rear window on the X is 11%. We just put 50% over it and it's perfect. We did 5% on all the door windows, and 50% on entire windshield.

Hey guys, I searched and found a few older threads on this, but couldn't quite get an answer on this. We just took delivery of our 22 X Plaid and can't get our garage door opener to connect to the homelink. I tried the tricks like open the frunk and hold the remote in the frunk, point it at...

Same here, that 3rd row vent is basically null, barely any air comes out

Here's a photo I took of thiers at an March meet 🤣 cool color but you guys weren't the first unfortunately lol. Maybe change the video title to world's second Celestial Unicorn X Plaid?

Lol wrong...OzBraz was the first, they wrapped their X Plaid Celestial Unicorn months ago, can see it on their IG @OzBraz

I prefer old headlights with the LED (no projector), and rear is way too small of a difference to even tell lol

That's childs play 😂

Zero issues, zero rubbing, always drive it in low just as shown in photos.

Couple shots of my Miami Blue Plaid sitting on VTForged GT-R/FS 21x10/21x11 wrapped in 295/30/21 and 315/30/21 Michelin PS4S. Matte black face, gloss black lips, black hardware. N2itive Links set at -10/-11 Untitled by Toad, on Flickr Untitled by Toad, on Flickr Untitled by Toad, on Flickr...

Couple shots of my Miami Blue Plaid sitting on VTForged GT-R/FS 21x10/21x11 wrapped in 295/30/21 and 315/30/21 Michelin PS4S. Matte black face, gloss black lips, black hardware. N2itive Links set at -10/-11 Untitled by Toad, on Flickr Untitled by Toad, on Flickr Untitled by Toad, on Flickr...

I see most aftermarket 22s in 9.5/10.5, does 10/11 not fit normal body with correct offset?

Thank you for the review! I don't include tape with them to keep cost down, and to quicken production time from my manufacturer in California who dropships these for me. I figure very many already have 3M VHB double sided tape in their toolbox / shed, and could appreciate saving say $25-$30 vs...

Yeah the Tsportline ones being so dinky is the reason I made mine! Beautiful, lots of coverage, and no drilling required. Super simple and easy install! Also made mine because, no offense to him, but the M4H4X flaps were super ugly in shape. Remind me of the Rally Armor flaps all the tuners put...

Love it! 295/30/21 square?

I have these dropshipped from my manufacturer, so no way to have him include tape in the packages, he is only making/shipping the guards for me. If I included tape I'd have to up the cost about $20-$25, figured most already have double sided 3M around the house and would appreciate the cost...

The flaps do not come with double sided tape attached, you can use as much or as little as you want on your personal vehicle. I recommend 1/2" 3M VHB tape, and to mount the tape onto the car (not the flap) so you know every possible surface of the car that can grip the flap is indeed gripping...

Guessing negative as he stated he's doing widebody on his..

I'll work on rear sets now, as of now fronts are completely done and available for ordering :)...

Are you putting these on a widebody X? That's really aggressive fitment!

Yes, that's just matte carbon wrap so you can peel it off if you don't like it and it will expose the satin/semi-gloss black underneath.

Gotcha, I may roll out rear ones down the line if I get a lot of interest, for now all the interest I've had has been for the fronts. The more stuff you stick on these things, the worse the aerodynamics and range, and more wind noise, so trying to keep it at a minimum.

They work incredibly well, I get zero sling whatsoever on my Plaid with these. Nothing ever on the doors / body of the car at all, the doors and rockers stay super clean with these!!

Not at this time, rears don't seem to be a problem on these cars, these are meant to protect the quarter panel from being blasted by rocks from the front wheels due to the hourglass shape of the body.

Few more photos since I keep getting DMs about them! These are made out of 1/16" ABS plastic. The side facing the wheel is textured plastic, and exterior side facing the body is matte carbon wrap. These are cut professionally by my manufacturer in California. Each set is made to order...

Any other aftermarket wheel photos on the refresh X LR/Plaid!? Trying to nail down offset on my new wheels!

Hey guys, my rock guards are all set, and production is in place! DM me for a set, $150 for the pair of fronts. Uses the factory push pin, and just needs double sided tape going up the edge that touches the fender. You can also reach me at @vipertoad on IG. Thanks!

Lol I got the black ones and love em.

Yup, exact reason why I'm making mine, OEM ones are hysterical and look horrific.

Rear will be flush, but usually people stagger front and rear approx 5mm, so you'd want 21x10 +30 / 21x11 +35 for a flush look all around. I have 10/35 and 11/40 currently and it looks great. Going 5mm more aggressive on next setup to 10/30 and 11/35.

I'm not a fan of the headlights, taillights are ok. I think the last headlights were best looking ones they made.

Do you have to have a "Premium" account for Spotify to work? Free account doesn't want to login for me in my 22 MSP

Mine is the same :rolleyes:

To each their own, I'm good on the Rally armor / truck style square mud flaps lol, this isn't a WRX or offroad car.

My car is pretty low, sitting on N2itive lowering links, -8/-9, only drive it on low, and they have never scraped.

Hey guys, just wanted to update this thread. Since nobody seems to make nice rock guards anymore, I took it upon myself to cut my own, shape them, and put my VT twist on em. I have sent a prototype to my manufacturer in California for mass production, so should have pricing ready soon for these...

Thanks guys!! So happy with how it came together, better than I imagined for sure.

I'm working on some awesome refresh S rock guards, that actually flow with the body and don't look horrific like all the other options. Will be made from 1/16" ABS Plastic, use the factory push pin location and 3m double sided tape. One side will be rough/coarse, other side matte carbon wrap. No...

Took some photos today of the entire look in the sun, major South Beach vibes!! With the windows down it looks crazy seeing the white calipers and the white interior against the miami blue: Untitled by Toad, on Flickr by Toad, on Flickr Untitled by Toad, on Flickr Lastly, I finally...

@bigboost here are some photos of the star ceiling, they flicker and get brighter/dimmer, and I usually have them on color changing mode, so they go through the entire spectrum of colors on a loop, it's really crazy in person! The kids absolutely love it haha. Remote controls everything, and you...

UPDATE: Ok, so picked up the Plaid from the wrap shop on Thursday last week. Wrap came out incredible!! SUPERRR happy with the color. In the shop the sample swatch of Inozetek Miami Blue looked dull, but on the entire car it's super bright and poppy. Came out wayyy better than I expected it to...

LOVE your car man! I have custom 21s on order that should sit 1mm less aggressive than yours front and back, your car was the inspo behind it!! I'll take some photos of the star ceiling when I get a chance, it's insane inside haha.

First order of business was to remove that god awful front plate and wheel covers: Untitled by Toad, on Flickr Untitled by Toad, on Flickr Untitled by Toad, on Flickr Untitled by Toad, on Flickr Weekend before last, I installed the N2itive lowering links set at -7 front / -8 rears...

Hey guys, some of you may know me from IG or the FB groups, I go by Vipertoad. Scooped a 2022 MSP from a private party a few weeks ago and absolutely loving the car. This will be my new daily driver and replace my 2020 Ford Raptor I've been driving for the last two years. I have 3 kids, oldest...