Search results

I finished the first test drive in FSDs 12.3.4. It drives noticeably smoother and straighter. It is very aggressive after making right or left turns whether from a stop or not. It might be a little too aggressive, but it sure feels good to drive straight down the road with no steering wiggles...

I also got the second download for the 2024.3.15 update with FSDs 12.3.4. It installed! I can't wait, I'm going for night time test drive!

There is no "reinstall OTA" option under the service menu on my car. It would be a nice thing to try.

I have a 12/2016 MX with the HW3 and MCU2 upgrades. I have been on 2024.2.7 for the last 3-4 weeks. I was just offered to install the 2024.3.15 upgrade. I started the install and about a ½ hr later it gave me the dreaded "software update failed" error. I'm glad I'm not a conspiracy theorist, but...

What does this have to do with vertical screen early adopters?

Same here on my upgraded 12/2016 MX. I don't think we get the report button.

Snapshot button is gone. Many repeatable problem areas still remain.

It has nothing to do with Early Adopters. We're all waiting for Aug 20. In the name of the father, and of the son, and...

Yep, it's live. Very nice location at the Redlands train station new parking garage on the north side of the top, 4th, floor.

There is a Starbucks on the corner if that's your thing.

I have an upgraded 12/2016 MX and got FSDb last December. There was no training video requirement for me at least. You just get it and GO!

You're not alone. Some aspects of this version seem better, others seem much worse. Most are related to turns, where bizarre behavior is more often and much worse.

I am one of the early adopters who got all the upgrades and received my first beta last December. I just received beta v10.12.2 on its first day of general release which is a first. I usually receive new releases a week or more after it first becomes available. I conclude that Tesla is doing a...

Yes.

I went by today and the train depot parking structure is still not open and there is no indication when it may open. On a positive note, the trains through Redlands are doing test runs. In addition to the Tesla Superchargings on the roof, there are 7 charging stalls on the parking structure...

I too just received and installed FSD Beta 10.11.2 on my hardware upgraded 12/2016 MX90D. So it appears as though Beta uploads are again happening, at least for rhose of us that were stuck on v10.10.2. A quick several mile test loop at night seemed to work a little better at least in low traffic.

You might get it soon, or you might not. There is kind of hold right now for both new or current beta users getting the latest FSD beta release.

Just an update, I have one of the few 2016 MX with all the upgrades and am currently on FSD 10.10.2. The latest version FSD 10.11 was released about 5 days ago and I haven't gotten it yet. I am hoping 10.11 is stuck with general release problems rather than a problem with camera upgraded cars.

The parking structure at Stuart and Eureka in Redlands is to support the rejuvenated Amtrak train depot in DT Redlands. It appears to be proceeding quickly. In the Northwest corner is seen several electrical panels and lots of big conduits coming down from the upper 4th level. The first floor...

It seems to work for me up to about 4 mph and I'm usually within 1-2 feet from the ends of the lines.

Sure I don't have a reason to doubt that logic since we both have 12/2016 MX90D's. Maybe it's my Red color... it's special... haha. However, over the years, Autopark both Perpendicular and Parallel, have been intermittent at various times. I'm just pleasantly lucky it's now working OK.

I went out today and tried Autopark while on FSD 10.10.2. It worked flawlessly on right side open spaces both with no cars on either side or a car on one side. It worked everytime, so if yours doesn't work I think it's time for a SvC visit. Maybe they can recalibrate the cameras or have another...

I was on beta 10.9 which is a 2021 branch.

Heh, heh... I too just installed 10.10.2 which I'll test out tomorrow. I'm also retired so this gives me something to do too.

I didn't test it when I was on 10.8.1. I've gotten used to not using Autopark over the years since it's slow and can be intermittent. Hopefully I'll get Beta 10.10.x this weekend and I'll do more testing. I did BTW try it again this morning while still on 10.9 during an Arizona trip and it...

Software or hardware I don't know, but it's not an individual car issue. On my first set of tries Autopark started to work fine, then just stopped and further tries wouldn't get it to work again. Then a few hours later it was working correctly and I couldn't get it to fail at least 10x in a row...

OK so I had a chance to do some testing today of the Perpendicular Autopark function on my 12/2016 MX with all the hdwe upgrades and running FSD Beta 10.9. The first time out autopark worked perfect for the first test with lines only. I tried it again between 2 parked cars and it started fine...

For me 10.9 takes left and especially right turns at a slower speed which are far more comfortable. However, neither is ready for prime time and I often intervene. Hopefully the testing we are all doing will hasten a truly useful experience.

I got 10.9... twice. About a week apart, go figure. No 10.10.

My invoice had the "C" triple camera listed, so after installation I inspected and found the "B" camera was actually installed. I received my first beta software 12/30/2021.

In my experience, FSD v10.9 is much better with this issue.

There were also two small screws that were holding the large plastic cover on my Model X.

As a followup, I had Tesla Mobile Service out today on an unrelated service call and I had him remove the triple camera covers and check the actual triple cam part number installed in my 12/2016 MX last November. And even though the invoice lists the"-C" camera being installed, the actual p/n...

My first drive today on 10.9 moving from 10.8.1. It seems much better at accelerating and decelerating from/to stops, lights and turns. Much more human like. Altho it still tried to aggressively make a left turn in front of an approaching car. Overall it appears much more normal.

I have received both the 10.8 and 10.8.1 FSD Betas on my 12/2016 MX90D with Nov 2021 camera upgrades. BTW they work the same IMO, i.e. they both have the same problems.

I received 2021.44.30.5 which is FSD Beta 10.8.1 and the 2nd beta update I've received since getting the camera upgrade. So I guess just be patient and when the camera upgrade comes along so will the betas. As a consolation, the 10.8.x betas are imo still pretty rough and far from where they...

I have a Dec 2016 MX90D with upgraded hdwe including cameras and no interior camera. I received FSD 10.8 on Dec 30, 2021 and it works perfect, err... well as perfect as 10.8 can.

So I used the color test screen on my MX and the Front Camera view looks identical to the pics that Mardak posted. The Red is orangish and the other colors look like the original test pattern colors except they are muted compared to the original on my iPad. So whether I received the -C triple...

Thanks Mardak I'll try the test screen.

I am one of the cars that received (apparently) the -C triple camera upgrade on Nov 18, 2021. I also received FSD Beta 10.8 on 12/30/2021. The Beta runs very well on my 12/2016 MX90D. I'm still trying to get a SvC to confirm what I have but for now it works well.

I couldn't get the second camera cover off to verify the p/n of the triple cameras. I'll try another SvC when I'm back home to verify the number. The SvC that installed the replacement cameras insisted that they installed the correct assembly and wouldn't recheck. I did have a very early Nov 18...

Great, seems easy enough with the right tool.

Can you see this by removing the first small cover or does the mirror and second big cover need to be removed?

I'm not quite sure how to get a dash cam clip, but I've attached a cellphone camera pic from my screen. The left and right portions look a little better than the Front view IMHO. So I'm not sure what I've got.

I only think I got the -C triple camera bc the invoice I received stated that. To be honest, the cameras I got display the same as the b-pillar and repeater cams I got, i.e. they are muddy looking colors although they display blues and yellows and reds in a very muted way unlike the rear camera...

So the wait is finally over, thank you Tesla. I received 2021.44.25.6/FSD BETA 10.8 this afternoon. I have a 12/2016 MX 90D with 1½ year old AP3/MCU2 upgrades and the camera upgrade from 11/18/2021. Safety Score is 98. Over on another TMC thread there are a lot of reports of the same experience...

I can hardly believe it, I just installed FSD Beta 10.8/2021.44.25.6 on my 12/2016 MX with AP3/MCU2 and camera upgrade from 11/18. It's been almost 5 years to the day since I took delivery. I just installed 2021.44.25.2 yesterday and hadn't even had a chance to drive that yet. It's only a little...

Anyone getting ANY update? I haven't.

Nice to know something positive is happening.

I have had the camera upgrade for 6 weeks. I am still on 2021.36.5.1. I have not seen anyone with a camera upgrade getting any updates, let alone an FSD update.