Search results

Just an update: Tesla SC replaced the lateral links. On both sides the bushings were cracked.

Hmm but shouldn't the noise be there also while driving then? These clicking sounds only happen while turning the wheel. Driving forward or backwards does not produce any clicking.

Hi there. I got this clicking noise from behind the front wheels when I turn left or right. Is this normal and has anyone here seen this before on their Model Y?

Just like a bad tattoo the regret will sink in after a while.

Hi there So a while back I did a couple of hard brakes on an empty road to clean the rotors and pads since we never use them. Nothing new and I do it every month at least. Last time I did it the car went over a small dent in the road while I applied the brakes at max. The car went over the...

Only way to find out is to test an older version from here, I would suggedt going back at least 12-15 months and try from there: https://m.apkpure.com/hbo-max-stream-tv-movies/com.hbo.hbonow/versions https://m.apkpure.com/disney/com.disney.disneyplus/versions You can either transfer the APK...

Yeah they use that system because most times people don't ship back the broken goods and just give up. A friend of mine went through his bank and they refunded the entire purchase and not just the screen. He got all the money back for everything. And that just shows how stupid HS are, he warned...

Just avoid Hansshow. Call or email PimpmyEV. They reply fast and their service is really good. Hansshow is a joke.

Well I got off the panels without issues the first 4 times. When it broke of it was also about -8 celsius. Plastic breaks much easier at such a cold enviroment. Also I simply took a clip from the other side. I want to believe that it is more important that every clip holds the panel near the...

Just to update the final solution for this mess: There is now a new harness that connects to the rear connector where the OBD2 adapter goes. Much easier to connect and it does work as intended. Anyone who got the screen should get the new harness from Hansshow or PimpmyEV. Even with the new...

Well thats the thing... The small white clips that goes on the top part of the side panel covering the subwoofer aren't availible online in bulk like almost every other clip for Tesla for some reason. Tesla wants almost 30 dollars for a couple of them. They look like this And they go along...

Hi again I have located it to the panels themselves that hides the subwoofer. If I press on the panel it stops. It is where the panels meet. To anyone who wants to remove the side panels I can say it is quite simple, first time it is a bit scary but gets easier for every time you do it. Whats...

If you buy from them use Paypal. They can help you much faster than the support from Hansshow. Their support is like a chatbot, but it's even more stupid.

Yes you can't download the latest versions since they are not supported. I first downloaded Chrome. Then I started to download older Netflix versions in APK format and tried them out. In the end I found a version that was like 1 year old that worked fine. Some versions didn't start at all...

Hey thanks for the tip, will check it out! So I just came in from laying in the trunk while my daughter played some music from the drivers seat. I located it to the lower panel thats covering the subwoofer side. The part that is at the outer area is where it comes from. Once the rattle starts...

Hi there, I love the sound from our Model Y. And i happen to love the bass so it is maxed out (the two levers to the left in the EQ are at max). Many songs that has a clear hard bass produces a rattle coming from the subwoofer side. It's really hard to locate. I have removed the panels on the...

Yeah well it looks clean I guess nothing obvious that obstructs it. I have a theory that it's always the right one because all the lights and road is on the left side, the right side is on the dark side and because of that the car believes it can't see much when it is in reality nothing to see...

Yeah then I might have the same issues with them because since day one I get errors on my right rear camera saying that it is obstructed and that I should clean the surface. This only happens in the dark and almost never in daylight when using autopilot. I have googled my issue and it seems...

Yeah that's scary stuff. I have the Amptech powerfunk and kicksensor. Amptech is considered being "the best/safest" but that won't help me. May I ask what issues you had with the car and how did it get resolved considering your mods? I've also seen that screen and while it looks more integrated...

Yeah I agree. In my case if I have any issues ever and they claim that the screen is causing it I can simply unplugg it from the 12v outlet and show them that it's not related at all. But if they see a harness going to the computer.. well that could be trickier to explain and remove to...

Well I hope it works better. I still wouldn't get a system that could at any time brick itself or the car because of an update to the car or screen itself. Then you have to ask and hope for the Chinese to release another update to fix it. And for how long will they release updates before they...

Lets hope it works for you. For many of us it just went black and we did exactly what they said. I am never messing with the ports in the computer again. At least here in EU Tesla can claim that the mod caused a future error and void your warranty. They told me that over the phone that they've...

Yeah well that's Hansshow service right there. They barely know anything about what they sell. And often the info you get is just wrong. You can imagine as I was the first to notice that the rear screen caused update errors, how hard it was for me to get them to understand what was going on. At...

Update from Tesla regarding failed software updates. I have disconnected everything that has to do with the screen. Yet the car gives internal autopilot errors. These errors are not visible to me as a fault with the car but they could see them at their end. My AP works great with zero errors...

Positive update! My engineer buddy managed to start the screen from 12v DC power. The problem is the protocol box that did not send a 3.8V CAN BUS signal to start the screen after the update. So the RED cable is the signal and the screen needs 3.8v from the red to turn on. We will put a 12v...

Update from Shiva Sapkota on the messed up update that killed the screen and bricked my car: "I haven't heard back from Hansshow. I have another subscriber in the same situation and he is waiting for response as well. At this point, I would say the best course of action is to remove the wiring...

We have now at least two confirmed cases where the screen goes dark after update, and the wire modification does not help. The other user had just like me to disconnect the entire harness and restore the connection to stock from factory.

The sync to the front screen is like that and cant be fixed. Simply put the small screen cant change and control data on the Tesla screen. That would be too invasive on the system. So you have to live with that. Regarding adjustment of the heating that part worked great on mine until it bricked...

No everything was connected and worked, plugged in different USB stick that worked. Updated the screen and after update was complete screen went black and the car went crazy. After that I disconnected the screen and box, did the cutting and connecting of the cables with no chsnge. Removed...

HUGE WARNING!!!! Updated the screen, everything went black! The car got bricked HVAC stopped working speakers also. Car went into limp mode. Rear screen is dead. Did everything with the wires and it did not help. Unplugged box and screen from the harness and it did not help. I was forced to...

I'm fed up with this screen. I will attempt to do a mod where we disconnect it from the car, find out what voltage it needs and make a 12v plug adapter that runs the screen without the HVAC functions that I can live without. Auto On/Off should work as the 12v plug turns on and off as the car...

Has anyone been able to update the software in the screen? I've plugged in an USB via a USB C OTG adapter to the screen with the update file on it but nothing happens. Then I go through the menu and try to update that way nothing happens there either it just says "no update detected" or...

Regarding who makes them... Probably a Chinese manufacturer who produce noname products for the market. Hansshow seems to be the "ambassador" for the screens as every reseller I've spoken to the last week have said "We will reach out to Hansshow regarding these issues". Unfortunately Hansshow...

Yeah it looks like this issue is isolated to that protocol box. Good to know that at least. Today I will try to update the screen and after that cut and connect the wires. After that theres nothing more to do than waiting for Tesla to push me an update.

Now to the next worry: Will Tesla push out new updates to us again or have they "caught" us and now locked us out from the software updates? Long story short: A good friend of mine installed a Hansshow display in his M3 back in 2019. The screen did something so that he had no errors but Tesla...

The update can be downloaded from PimpMyEVs site it's already there.

Here is the update and what needs to be done (scroll down) https://pimpmyev.com/collections/new-arrivals/products/rear-entertainment-climate-control-screen-for-tesla-model-3-y-2017-2022

HUGE UPDATE! Shiva Sapkota just emailed me! "I just heard back from PimpMyEV and they found a solution. It requires cutting some wires and performing a software update on the small screen. I will send you instructions when I get them." This is amazing! Can't wait for it! I will report it here...

Glad to hear that for me they won't even answer regarding a return. They do answer sometimes other questions but the info is always wrong. I know way more than them about this screen right now.

Well thats the million dollar question. What do we do? Shall we go ahead and remove it and pray to any god you can think of that updates will work or do we keep our heads cool and try to update with the screen connected again? As I mentioned we have one more chance and that is disconnecting it...

Interesting if the issue was the harness itself. I guess the people who created these products checked for errors and function without thinking about the update issue (it's quite a curveball). I mean, now when I step back and look at this mess: I go and buy a 75 000 dollar car only to...

To everyone here reading I would like to inform you that I've spoken to Shiva Sapkota. He is an Youtuber that loves Tesla mods and his video was the one that made me buy the screen. He is not happy with Hansshow and is contacting them among other vendors. He is trying to make them reach out to...

Yeah this has nothing to do with the update version but more with the entire update process being bricked. Im stuck on 36.6 as long as it is connected I guess.

The one question I have is why the little screen can connect to the rear port and the large needs to go in the main computer? Perhaps a power issue where the front connection can give enough power for the larger screen/processor? Perhaps the rear connection is safer but someone needs to test it...

I would dare to say that this will affect it, because it sends signals to the car what to do. Same thing different place of connection. On the other hand the rear connection is known for having less issues but is also known for issues after updates when Tesla changes the code. I would say don't...

Update regarding disconnecting the protocol box: DO NOT disconnect it! The main screen of the car started to flash, HVAC system stopped working and Autopilot features were disabled. The rear screen went black also, totally dead. So our hope in removing the little box is gone I am afraid...

The scariest part of this is if this darn screen has permanently blocked updates to our cars? What if some type of security in the software has kicked in that is blocking the updates and the only way to unlock it is to take it to Tesla where they will find out what we've done? That's the scary...

Hansshow replied and said "I think it's better not to updateThe reason has already been told you, the more updates, the more code modifications, which are not friendly to adding accessories, which will cause problems with upgrading accessories". So they said "So what?" more or less. They don't...

He will disconnect the protocol box ASAP before he gets the chance to update the car again. He got error on 40.1 just like me. Three failed attempts to install (I had one fail this far). Will you also disconnect the box before updating?