Search results

Is there a solution to this yet?

FYI, I just had the rear alignment looked at. The Hardrace lop links were adjusted to 290mm which put the wheel camber close to 0,0mm. The toe , however, is at 6mm toe in. The cams are max'd out. I'll be buying some adjustable toe links today.

Well... I decided to check out the link I was going to manufacture........ I apologise for wasting everybodys time by insisting that all was as it should be. I was in too much of a hurry. The car must have been soooo confused. For those who cant see it, the actuator arm of the sensor should...

That's exactly what I'm aiming at. The ball linkages are similar to the ones in Hydraulic actuator links. I'm planning to make my own to add about 30mm to the rear, when in standard height. I found this on a Lowering linkage listing "Rule of thumb, a 5mm longer length for the front represent a...

I agree, I've fixed the camber problem, now I just want standard height to work. I can set the suspension to high... the back is now standard height and the front is high...tesla wont touch it, and I cant get a subscription to Toolbox, in Oz. Now , I'm looking at fooling the sensor, I'm a bit...

well....Tesla wont touch it...bugger. ok, Have any of you guru's seen an adjustable version of the little plastic ball to ball rod? Which is on the adjustment sensor. I think I've seen something somewhere..

Yep, mines looks just like this....

thanks for the reply, yep my install is the same as the pix in the posts. I ddnt touch the sensor, just unbolted from the link. bugger. I guess you meani need a toolbox calibration?.....tesla service...

Hi All, I've just finished installing my hardrace links at 290mm. They're the right way up (curve Down), the adjuster is outboard, I tensioned the bolts with suspension on the ground at STD height. And the back suspension is now about 40mm lower than the front.... I drove the suspenion up and...

Hi All, I've just finished installing my hardrace links at 290mm. They're the right way up (curve Down), the adjuster is outboard, I tensioned the bolts with suspension on the ground at STD height. And the back suspension is now about 40mm lower than the front.... I drove the suspenion up and...