Search results

Springs sold Thank you !

Yes it is, just received it two weeks ago...ordered 7 months ago

They are for long range rear drive Model3.

I have a set of Eibach springs for sale. They have about 5000 miles on them . Pickup only. I live in south San Jose $200 or best offer Thank you, Jeff 669-243-0199

Finished installing MPP Comfort coil overs a few days ago and man what a difference ! I had been driving with Eibach 1” drop springs with cut Back bump stops. The stock shocks were defiantly over dampened and even with cut back bump stops it often hit them. The freeway ride is so much...

Sasha Anis - Mountain Pass Performance I will attend and hope to meet you Sasha.

Once again great job setting up your car and great lap. I saw your setup video and realized why you were easy to deal with in the first practice :) , but the second :( Jeff McCabe

Moving right along ! If they keep this up, well be charging their by Halloween :) Jeff

;) Good work

Your route has to be round trip, in order to cancel out wind and elevation changes. When I test, I do my loop with device on the car, then another loop without, then to confirm any improvement , I do it again with the device reinstalled . Oh course same day doing this. :)

Here's a reason to like Aero Wheels......You can go faster on the highway and still beat energy % estimates ! I have gone to southern California several times over the last two years with my aero covers and can go 75-78 mph and still beat the % estimates. So all you people who are always...

Did you see the 30 new Superchargers at the factory :) Jeff

I thought they were mock-ups also, till I saw a closeup of the concrete bases !

They look like their on the left side of the factory, looking from Fremont blvd. Its where the service center used to be.

Sorry about that.....I'll try harder next time :)

Yes, the event was a lot of fun. I also enjoyed picking on the slow Tesla's :) Cant wait for next year ! Jeff

Yaa, saw the standing yellow in 6. It didn't really slow me down, so I was one and done Jeff

Heres a video of session 2 group one . ▶ 6:43

Thank you for doing this text ! I just wish they would show all being tested the same. Elon did clarify on Twitter they orientated the tile according to how it is installed on the roof. Jeff

" as the others have cracked over much longer lengths than the Solar Roof Tile can" This is the precise reason the others failed the way they did. They where unsupported along the entire length. The Tesla cell set sideways is supported at least 40 percent better, which didn't allow it to...

Ok, is it just me , but watching to video showing various tiles shattering is deceptive ! They hold the Tesla glass tile horizontally, with clamps much closer together. Show all samples held the same way !! Come on Tesla, your better than this :( Jeff

Ok, I'll add my two cents.... I have a Supercharger on my way to work. I use it once a week at 5am. There is never more than one other car their at that time. Who am I hurting ?

Hello from your competition :) Im real jealous with your Drive-train. It is my plan also as soon as I melt my dc motors and you and Jack Rickard fully workout the bugs :) My first track day with my Cobra was last years Refuel. Its old school, series DC GE11" . Thats as high as I ran...

Yah ! Played with the Audio USB fixes this morning. I was actually able to find the song I wanted using the Alpha list on the right side ! Yah . now back to your regularly scheduled programming :) Jeff

This is the wheel im talking about. Thanks, Jeff

Hello, I need a 19" 1st Gen wheel for a project I am working on. I don't care how damaged it is , as long as one of the five spoke segments is un effected . Thanks, Jeff McCabe

Ditto.....link please

David, I have an idea to quiet your covers down. Use nylon edge trim. It will slide without making noise. Plus It will minimize scuffing of the rim. This is from McMaster. Push On—Style 7 7/64" __ 17/64" 15/64" 21/64" __ MDS-Filled Nylon 8721K12 1.11 .85 1/8" __ 17/64" 15/64" 21/64" __ Nylon...

David, Yes this has been my results also. The faster you go the more your gain. A few months ago I took my longest trip with my Aero covers to Southern Ca. from Norhten Ca. This was with four adults in the car and I could keep the watt per mile to just under 300 at 69-70 mph. I have not...

Hadn't thought of that ? I was waiting for a call back from the service manager who was on vacation. Jeff

I tried to buy the extended this week, only to find only the original owner can do so ! This was a major surprise to since the two warranty repairs I received so far, the tech asked me to consider purchasing it. I did tell at the time I was the second owner and they told me it didn't matter ...

I didn't get power limited(series dc) , did get past the torque peak of my motor and acceleration past 80mph really slowed down. I will be going to a 2.73 final gear from the 3.08 im currently running. The motor did get really hot and im currently looking at ways to remedy this. Im already using...

Yes, it was a lot of fun and the first track day for my new conversion. It was also my first track day in two years and the Cobra was much better than me ! It will take several more track days to find its limits. Jeff

I will make a spreadsheet and see how much they would cost to reproduce. No promises though. Jeff

Here is a link to my write up. Aero wheels

First off, I really like your design. I used full moon covers on my Dodge truck and it definitely increased efficiency . Here is what I came up with. I think they solve most of your bad points.

Howdy to you right back ! Here are some links to my other conversions. Jeff's 1965 FFR 427 Cobra Roadster Jeff McCabe's 1984 Porsche 928 Im spending most of my time getting the Cobra ready for a track day in May. The NSU is a cute little micro car, should be a real light conversion. EV's...

Hello. Thanks for the Welcome ! Yes the 928 Porsche has been a lot of fun the last 10 years. Its for sale, but I still drive it on weekends.

The skinny surface is because of the four coats of clear paint.

Ok, Had some time to do the install of the wheel covers. As you can see..no wheel was injured to install covers(no drilled holes). Don't get me wrong im not against drilling the rim to anchor them, I have done it on both motorcycle wheels and my Pin Drive wheels on my Cobra. I just wanted to...

Thanks for the Hello ! Yes I will be at ReFuel with the Cobra. Ive put about 1000 street miles on it so far, just working out all the bugs. I used to race bikes at both PIR and SIR in the day, but haven't been to the new track in Medford. Jeff

Yes, its very similar to the 1000cc superbikes I used to race. Has definitely made me sharpen my driving skills :) Thanks for the Hello !

I have loved the S ever since it came out, but it was always out of my price range. I told myself I would wait until the first lease returns were available and see where the price fell. Well the end of last year they were finally a possibility. I purchased my Pearl White S85 from a retired...

With my racing background I am very familiar with the term ..... I have a general rule about adding UN-sprung weight ...don't. If I do, I will find an item that weights the same or more and remove it :) Jeff

Now your talking ! Make me a set ! Please !

I just weighed a set of five, .68 lb. for the .04" thick aluminum ones and .938 lb. for the .125" polycarb. I'll take Solution B sir :)

Yes, my initial idea was to match the body color, but once on the car, they just didn't look right. I will test with the brushed look , but I can always change them later.

Yes, I will post some more photos on how I install them. The brushing effect, was done because my Laser at work doesn't like cutting Aluminum because of the reflectivity, so I just put a swirl pattern on top in order to cut them. Turns out , it looks kind of cool !

Testing next week !

Im going to use safety wire for initial testing. The wire will join pairs from behind. Two out-most pairs , then two in in word pairs. This will require me to remove wheels to install. The smaller openings, will be left as is. They should have little effect, ill find out soon enough ?