Search results

that is really reasonable!

It cost about $500 (their new V2 kit is a faster and I think is $549.) Install was really pretty easy. They have a youtube video that shows you exactly (sort of) what to do. hooking up 2 wires to the battery and plugging in a bunch of stuff. I think you need a 10mm and 12mm socket, and...

I just completed the install of the motorized Frunk mod on my model X. Install was pretty easy and the seller was super helpful. I got it from Tesla Offer in China. Here it is in action:

I used +35mm offset. 64.1 hubsize. worked great.

I spent a little over $5k for xpel stealth. he did an amazing job. it has been over 2 years and it still looks brand new.

check out lee berbs in New jersey. Did my X a few years ago and it is still perfect. I’ve sent a few people to him and they all love him. Tell him I sent you. Tony C

I just finished installing our dual destination charger at our ice cream shop in Coopersburg, PA. www.theinsidescoop.com If anybody is nearby, stop by for some free "juice"

It lights up the rear TESLA letters. moves with the blinkers, backup lights etc. Plus you can program different light patterns from you phone. works great. videos online

looks almost like a twin to mine. awesome!

yup! It really is X

i have that. it is also super cool. that is actually my matte black X on the website for the appliqué. (before my black wheels came)

Model X Front "T" - Tesla Lights i have one. easy install. looks great

I have one of the early ones installed on my X (my X is actually the car on the website). It worked awesome for a while, but I fear I had the water intrusion problem also. Probably going through "laser washes" didn't help much! I emailed Jurgen a while ago about ordering a replacement light...

just ordered a set. @EVTuning , any ballpark ETA?

nothing special. The only thing is that he wheels are sort of custom made. they mill them down to the correct offset. They sometimes put a groove in the back of the flange to keep them from seizing on the hub. For the tesla, you should specify that they make it flat. The offset is...

For wheels, I didn't want to go all the way to the harsh 22", so I compromised at a 21" flow forged MRR FS01. They only weigh 26lbs vs. Tesla's 22" 41lb, so I don't think I'll take any range hit. I also used Pirelli Verde Scorpions. wheels FS01 tires...

I am not sure. I imagine they would since there are so many plates like that. I haven't gone through a plate reader (that I know of.) Starting the lighted T install now.

@HankLloydRight , I was looking at this thread to try to find where to get 12v for the lighted T for my X that just arrived and I saw I never answered your question about the plate. Although my vanity plate looks like just and X, it is actually XLU because the 2 vertical letters on the side for...

Where to you tap power for the front T on the X?

ahh...thought this was the same one Jurgen was working on! There have been so many ev-applique website iterations, I can't seem to remember who is doing what! I'll keep watching this thread. if you need anyone to help test, let me know. tony c

did this get anywhere? I've been messaging jurgen but he has replied for a few months.

well, if it is normal to chatter, then mine is broken since it isn't chattering any more since they replaced the half shaft!

yes. adjusted the little window on the front door. they also replaced a half shaft to stop a chatter on acceleration

90% clean means that about 10% of the car is dirty (rocker panels, etc.) overall, still looks amazing and doesn't show tons of dirt.

i go through a spray only car wash every 2 weeks or so, and it looks perfect. It certainly doesn't get 100% clean, but in between washes it stays 90% clean. It is NOTHING like a black glossy car. I love it.

The gas pump/charger is almost complete! I'll be installing it at our 1950's ice cream shop, www.theinsidescoop.com in Coopersburg, PA soon! There is another charger mounted on the back also. I tried to keep it a little retro with the odl fashioned Tesla logo on the globe. tony c

I didn't have the 20's on for more than a few days, so I don't know. I don't drive slowly at all, and most of my driving is short trips around town. maybe 50 miles per day. I average around 370kw usage wheels are lighter than the 20's

Still raining

I am trying to implement a novelty sound device on the MX to simulate different sounds when the car accelerates. (yes..I will be able to turn it off because it will be very annoying)! I've tried 2 different devices that work on the MS reading the can3 high and can3 low data from the can bus...

I've confirmed the wiring is correct and I tried another device made by kufatec that doesn't need the canm8 to get the pulse signal, and it also does not work on the MX. I think you are dead on accurate that the devices I am trying that work on the S must not be reading the MX data...

It is a Lehigh University plate. And most of the special plates allow for customization. PA has hundreds of options...but you need to be affiliated with the group, I am an alum and luckily X was available.

i get more questions about the plate than i do the MX. lighted appliqué is working great. Now i just need the one for the front T!

this is the pinout I am using. Using 18 and 19

I am trying to rig up a jetsons type sound also (just for some fun every once in a while) and I have a can bus cable, but I am not sure that the Can hi and can lo pins are the same on the MX as on the MS. (I have an MX) This is the cable: Tesla Diagnostic Cable For MS/MX (Sept 2015 and up) -...

i didn't leave it out and I doubt if it would seal. 2 issues: the weatherstripping is on the tub and the hepa filter would just be exposed in the open front without the tub in place

pretty simple. I did it today. There are 20 10mm bolts that need to be taken out. After removing those, the tub lifted out and exposed the HEPA filter and ductwork.

thanks. That is an S, but maybe those 2 bolts are the same in the x. gonna check.

I took out the carpet liner in the frunk on my model x and wanted to remove the frunk tub, but there are many bolts and I don't know if they all need to be removed to take out the tub (I'll be explaining in another thread why and what I am doing)...but for now, I just need to know if anyone has...

Hello Lehigh Valley Tesla owners! Not sure if anyone was at Cars and Coffee today, but I was there with the matte black p100d X. We own www.theinsidescoop.com which is a pretty cool, retro homemade ice cream shop here in Coopersburg. I'd be happy to host a meet up here sometime if there is...

I've purchased 3 types. The long black tube models like on ebay, the snap in replacements that look like the existing led light, and these from aliexpress. By far, these solid metal ones were the best by a long shot. and they were only $22. They also work in the X as per my thread in the X...

Installation took me about 45 minutes. Cost was $22 do the led lights and $8 for a big pack of washers. $30 total

I tried 3 different door logo projectors, and finally found one that works. The direct snap in replacements are terrible. I bought them on amazon for $18, but they are $50 now. Here is a link to aliexpress, bu they suck. The logo is hardly visible, but they were easy to install: For tesla...

Has anyone confirmed that these can work on an X? I have 21" aftermarket wheels on now, but I'd like to consider the Arachnids if they work. Tesla (of course) has not really been much help. I know the offset is about 5mm difference, but my main concern is load rating and whether it is ok...

yup. They are doing some shows out near you soon. Check them out. Really fun band, and a great group of guys.

Check out my friends' new video that starts with him driving his Tesla. Davey Havok from AFI, and Tom Dumont, Tony Kanal, and Adrian Young all from No Doubt formed a new band called Dreamcar. Model S featured at the beginning.

Yes, greg and lee did a quartz coating on top to help keep it clean. I am going back to see them in april for a little touch up of the blacked out trim.

Just got mine. The workmanship is amazing. Really, really impressed.

I ordered some of these to try, which seem to be the highest quality. 2x car logo Ghost Shadow Projector Door welcome Lamp LED light for VIP Batman Tesla Iron Man Chicago Blackhawks Hockey NHL COBRA-in Interior Lights from Automobiles & Motorcycles on Aliexpress.com | Alibaba Group

I received the 2 door projector lights that I ordered on amazon for $30 (before price went up) and they are terrible. They do snap right into the space on the X with no clearance issue, but the image is so dim you can't see it. Amazon.com: LQYAUTO 2PCS For Tesla Emblem Laser LED Door Courtesy...