Search results

Same question. I'm wondering if anyone has tried the OEM snow chains on this setup. Thanks!

Has anyone tried snow chains with this setup (using DSW06 Plus 255/45R20 on Inductions)?

Ok, the deal is sweeter now (with Plaid costing $5k more) if someone can figure out how to get this reservation over to them.

I ordered a Model X with local Bay Area delivery using my referral code when the referral discount was $1000 (instead of the current $250). I have since decided not to buy it. My question - is there is a way to pass this reservation on to someone else? If yes, how can that be done, and where...

A custom app I created a few years ago. Here are the latest figures, just FYI...

Pictures would be great. :) Did you use the insulation from the old part or the new one?

This is not based on the "estimated range" which changes based on how efficiently you drove the last 5-15-30 miles but rather based on the rated range which should not be impacted by factors other than degradation or BMS calibration (I guess what you are calling the guess-o-meter).

I understand that degradation is normal during the first 5-10k miles but just curious if others saw a similar trend. Until about 6.5k miles, the range was around 326 miles, and only in a couple of weeks following that, it went down to 312 miles. I recall three things that happened right around...

Interesting. Will do that if the noise returns. It’s funny that this happened during CA heat wave in 100F+ temperature on a 6 month old car. :-)

Similar to this video (which is not mine), my rear passenger side door handle also makes a noise that disappears slowly after pressing it a few times. Does anyone know what this could be? It is not always reproducible and not worth taking into a service center. 2022 Model Y delivered in March.

Thanks, I got the package yesterday with an "I + A" sticker. I assume that means Intel + AMD and is the AMD version of the module.

I am getting my data module in the mail today from AliExpress. I have MY with an AMD processor. How can I tell if they sent me the module compatible with AMD or Intel? Thanks!

this

Even if you don’t buy tires from them?

Do the mobile techs lift the side of the car using a single floor jack or two?

I believe the OP... My MYLR's (delivered in March 2022) build quality is not the greatest (and I have been a member for a long time for those "checking" the post counts, etc.) I am not surprised that someone does not want to deal with taking their brand new car in to fix production issues...

I have a vin since they canceled my hold request. Please let me know if anyone is interested.

I will try Topfit. Just fyi, I got Hansshow from Amazon twice but both of them had imperfections and the tape was already coming off at the edges. Ended up returning both of them.

I still have a few rattles/vibrations that I cannot seems to figure out. In the meantime, the driver seat has started making a clicking sound when it is in the furthest back position... :rolleyes:

Hello all - Thinking about installing a rear spoiler (for aesthetics and low garage clearance) and wondering which you guys recommend based on fit and finish. I would like it to be real carbon fiber in matt finish, matching the OEM one that comes with MYP. My search is pointing to RPM, Topfit...

This fixed the most prominent rattle/buzzing I had. Car is MUCH BETTER now. However, there are still a few other minor rattles present which is pretty annoying.

I think I found what was causing the mystery rattle that I hear coming from the rear of my 1 month old car. I tried adjusting hatch stops, applying grease between seats to prevent rubbing noise, took out rear headrests to rule that out, applied felt tape to few trims inside including license...

Did you ever figure this out?

Could you please zoom out to show which part is this? I have a similar rattle and cannot tell from this picture which part you wrapped. Thanks!

No. Edd still April 30-May 28

A few updates: * (minor) I updated the configuration to remove the tow hitch. The configuration is as basic as it gets now. * I can think about account transfer (after I transfer my cars out temporarily) if the buyer can transfer the account back to me after the transaction is done. * The FSD is...

I have an LR reservation at $58,990 base price (4k cheaper than the current price). It is white with a tow hitch option added. Some other relevant info: * I have a Tesla account that I can NOT transfer since I have other cars (current and past) * I have already entered the registration...

With appointment

Just FYI - I took my car to Fremont SC post-delivery for wheel alignment and panel adjustments and mentioned there that I had already installed Homelink and just need it to be activated. The Homelink was activated, and the invoice showed a $39 charge and a ($39) Adjustment. YMMV.

You may be in a different situation, but if you have children or pets, it's not a good idea to place garage door sensors too high. I think the code (or general rule) is no more than 6 inches.

Cool, thanks for the tip

Having the same issue. March 22 delivery. Tempted to fix myself…

I got AMD on LR with tow hitch delivered on March 22. 410xxx

I had to get the windshield replaced on my S in 2018. 4 years later, my new Y delivered in March 2022 has the same issue.

Installed the Homelink today. It was a pretty easy DIY. Now need to find an opportunity to get the config enabled. Secured using double-sided tape.

Hello all - I just wanted to say that my Service Advisor at Tesla who was assigned to my Model Y order placed in September 2021 has been nothing but a rockstar. He has been very very prompt with responding to my questions via emails (within minutes), made changes to the order when needed, told...

Just fyi… if you’re financing with third party like DCU, Tesla will deliver the car to you with an image of the check and a tracking number. I could have received the car today if I had not asked DCU to mail the check to me instead of Tesla. Now I have to wait 2 more days 😂

Just fyi… if you’re financing with third party like DCU, Tesla will deliver the car to you with an image of the check and a tracking number. I could have received the car today if I had not asked DCU to mail the check to me instead of Tesla. Now I have to wait 2 more days 😂

Good luck!

Thanks. Sept 21 profile completion, on hold until Jan 1. Then EDD changed many times and varied between Jan and July. Recently it was stuck at June 1-29. Got a text on the 16th to confirm March delivery - which I did. On 18th, EDD changed to March 20-Apr 2. This morning it changed to March 22 -...

Finally, got my VIN this morning - 410xxx! EDD now March 22 - 25. :)

Got my VIN this morning. EDD March 22 - 25. 410xxx

Seems like a long time. Hope you get the delivery soon. Good luck!

Did you have a hold ever?

DCU rates went up by 0.5% (as expected)

I got the March delivery text on 3/16, EDD was June 1-29 that changed to March 20-Apr 2 this morning. OD: Sept 21 that was on hold until Jan 1.

Hey that’s my car. lol

Not sure if it means much. I got same text and my date is still at 6/1-6/29.

No change yet for me. It’s been about 3.5 hours since the text. Lol.

Got the same text. Yay! :)