Search results

I wonder if it is because you are not currently subscribed. I am subscribed monthly and have the annual option. Or rather, let's you "Switch to Annual Plan."

Any pics on the car?

This video should help.

Thank you! I am on Eibach's. Supposed to be 1" front and 1.4" back I had 5 fingers front and 4 back. Pretty even at 2 fingers now. Front gap still feels a smidge bigger than rear to me.

A buddy of mine who is looking into a Model Y was sending me a bunch of questions and asked if I knew anything about this product. SentrySync - Tesla Dashcam / Sentry WiFi Sync SentrySync is an external smart USB drive that allows Tesla vehicles to sync dashcam and sentry videos to the cloud...

I think it works really well with stealth wraps versus glossy paint.

It was DIY. I bought a large sheet of 3M Dark Satin Gray and cut it out myself. I didn't use any of the kits otherwise I'd help you out. I do wish it was a bit darker to match the wheels. In the sun it kinda does look like a dark chrome. I think if I went with a Matte, it might look darker...

IMG_6739 by slade037 posted Jul 8, 2020 at 9:52 PM Here's mine in Dark Satin Grey. I'm still 50/50 on it.

I don't think those will fit a P3D if you have the performance upgrades.. The hub is too small. They should fit other Model 3s though.

Does Lexan improve in soundproofing vs Glass?

It's really easy. I used Gyeon Syncro on my Suntek PPF for the front bumper and hood. I would use a heat gun on the ppf or leave it out in the sun to remove any light scratches you might have on the PPF. Then just apply the coating as instructed on the bottle.

I bought a 3in Griots polisher and borrowed a friends 6in polisher. They are probably around $150 each. Decon with Ironx and a clay bar will be around $40. Polish/Compound probably around $25. You'll need a handful of pads if you're trying to do it all in one day and thats around $60. CK UK...

I used Griots Boss Fast Correcting Cream with a different combination of pads depending on state of the paint. My P was an inventory car so there were some decent swirls on mine. I suggest getting a strong flashlight like Scangrip Matchpen Light to assess your paint and then make your...

I did a wash, clay, and quick one step correction. Then used Gyeon Syncro and never looked back.

I've seen these on Amazon. They look better than any other covers I've seen. Unfortunately, I do not have any experience with them. https://www.amazon.com/dp/B086HJ39KF/?coliid=I7UPEQUSH3G5K&colid=R7S8X63F10HJ&psc=0&ref_=lv_ov_lig_dp_it

You could try these which look nicer than some other covers I've seen. I do not have any experience with them though. https://www.amazon.com/Weishine-Caliper-2017-2019-18-inch-callipers/dp/B086HG69N3/ref=sr_1_5?dchild=1&keywords=weishine&qid=1593710769&sr=8-5

IMG_5788 by slade037 posted Nov 13, 2019 at 10:59 PM All 4 20's in the backseat. Let's go!

This is what mine looks like...IMG_6749 by slade037 posted Jun 30, 2020 at 10:54 AM

I think I found it. Definitely not as good as the Electrified Garage one. That 8 min mark though .... :eek:

Bout to watch this now. The 8 min mark ... :eek:

So it sounds like I can install the trunk without plugging in the Canbus and it will still work? I never got a response from them and was planning on installing this weekend. I suppose I should wait for their video anyway.

So is this a universal canbus adapter? Teslaoffer asks for model year because i believe the canbus for 2018-older and 2019-newer are different? Shot them a note, so we'll see.

My wheels are darker plastidip'd anthracite grey which is darker the satin dark grey chrome delete. I think if the chrome delete was darker, I'd like it more.

Started my Dark Satin Grey chome delete project. I'll have to see what it looks like in the sun. It's definitely better than chrome but I'm not sure if I am 100% on it yet. I might go back to Satin Black. What do you think?Dark Satin Grey by slade037 posted Jun 14, 2020 at 8:35 PM

What did you do with your Vorsteiners?

That's pretty bad IMO. The seams should be touching and is barely noticeable. My front bumper was done in 2 pieces. I would get a refund and go to another shop

You can pull the carpet from the driver and passenger sides the same way. I did not brake any clips. If they fell out, out just attached them back in. I did not break any. I think it would be difficult to break them. Can't imagine them being very expensive to replace if you had to.

I plan on routing the cables through the bumper described in this video to avoid drilling into metal.

For the carpet wall up front, I used a plastic pry tool. Squeeze it into any seam and pull. It is connected by plastic clips.

You can pull the side trim of the center console. You can also use a pry tool to pull the carpet piece in the front side console. Accelerate and stop quickly and hope the change moves forward? :p

I plastidip'd mine. Anthracite grey and some glossifier.

I went to LA Tint in Manassas and am happy with it. The quote was pinnacle is $589 and stratos is $889. This included one piece rear and sunroof. The front windshield in Air 80 is $160. The Stratos is $239. I went with 35% Pinnacle all around. Air 80 on the windshield and sunroof. If...

I bought tire totes from Amazon. https://www.amazon.com/gp/product/B00QRVJ7XM/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 I had new tires mounted on my 19s. The 20s went into the toes and then into the backseat. Added a towel to the bottom of the backseat just in case. IMG_5787 by...

Yes. I've seen 20x10.5 et 45.

I think that is the package weight. From a vendor post: VS Forged VS08 20X9.5 22 lbs

Winter setup is mounted. Forgestar F14 19x9 et 35 on 245/40/19 Pilot Sport AS3+. Unfortunately, no weight savings. Didn't realize how much heavier these tires (5lbs+) are to the stock PS4S tires. F14 by slade037 posted Nov 14, 2019 at 11:04 AM Now, just need to figure out on how I'm gonna...

You can definitely have 4 wheels with tires in the back seat. I had 4 19 inch rims with 245/40/19 tires on them in the back seat. IMG_5788 by slade037 posted Nov 13, 2019 at 10:59 PMIMG_5787 by slade037 posted Nov 13, 2019 at 10:59 PM

I meant to keep it at "stock" ish size. 245/40/19

Dear Tesla wheel gurus. I am about to order my first set of aftermarket wheels (ever) for the winter for my P3D+. I found a set of Forgestar F14s that were made for a Ford Mustang. As far as I can tell everything should fit. 19x9 et 35 5x114.3 Bore 70.5 will need to get hub rings 70.5 ->...

What was your wh/mi before and after the wheel change?

You will likely need the SC order you a new bracket that connects the bumper to the car. My P3D has the same issue and I am waiting for the parts to make that gap flush. First they ordered just a new bumper but the issue was still there.