Search results

If only people knew the amount of dings and dents that cars (non-Teslas) get while being transported to their final destination by truck/trailer, fixed by the dealer (key here is dealer, as Tesla do not have nor specialize in body repair) and then sold on lots. It sucks, but you have 2 legit...

If you read down, they were cut out and solved...

My installer actually had some device (think like a grommet kit with a cutter that is the appropiate size [Amazon.com : grommet cutter]) that cut it perfectly. I don't think I would do it by hand cause if you catch an edge and cause a tear it will collect dirt and likely expand. I'd find a...

Battery health is unfortunately going to be tough to test -- some things I would check are the battery pack part numbers (check against the "bad" or "problematic" ones that have been in market), compared original miles vs today (then you back into a curve of degradation although its best guess...

Same problem here -- have been fighting this since 2017 and I leave warranty this Sept and it's aggravating/worrisome I'll be coming out of pocket for this. They've replaced almost my entire AC system (except for compressor) at this point. I get random, extremely hot/warm air, when the AC is...

Which inverter did you get, if you don't mind me asking?

I've done Pearl Blossom a few times, and each time I get stuck behind slow trucks, I regret not taking the "normal" 118/210/15. Plus it's littered with amenities and chargers if needed. I'm over in Calabasas and take that route all the time.

I usually burn 20-30 "miles" going up the grade for the 6 or so miles it really is...but on the backside (Santa Clarita side), I maybe only use 5-6 miles for the next actual 20 miles. It evens out somewhat. But don't speed...65-70mph seems to keep the car the happiest. It will be 400-700wh/m...

I made a reservation for Mid-Nov for this and will see if it holds...they'll usually review a week beforehand and tell me go/no go.

For me, it's actually more distracting. Not necessary at all.

Just had a bolt hit my roof glass -- I have a glass deductible of $100 for Tesla genuine replacement, but the process was interesting. First off, Safelite wouldn't touch it out here in CA. They also referred me to "Sunroof Express" which also won't touch it. They then sent me to Tesla to get...

Sold

Bump!

Bump! $440 shipped or PM your offer. Shipping on me.

Bump!

Bump! $495 delivered. boom boom!

Not correct. Got the upgrade and I had to call them back (mobile service) to take the film off the new IC screen they didn't remove before putting the dashboard back on.

bump! $550 OBO

bump!

Pictures

I have a used (but brand new front cam replaced new under warranty, only used rear) DR900S-2CH setup. I took this out of my MS so the only thing missing is the video coax cable that you will need from front to back and can be acquired from Blackvue for at most $35 I believe. This includes...

Here in CA Tesla outsources all wheel repairs to mobile repair guys.

I see now, thank you!

I got it - same notes as before.

Hi all, the Etsy shop that used to make these is no longer a thing. Anyone know where to find the replacement logos (or could make them??) for the Maxspider mats? Thx a lot!

Which Xbox controllers were recommended for the arcade games? (Wireless I hope)

Yeah, the performance improvement is simply night and day. I only noticed the film cause I saw some surface scratches on the IC while driving yesterday and then a super tiny bubble...which then when cleaning it I noticed it was just film, not the actual glass. Mobile service is coming on...

I got mine done last week. Just realizing now they left the protective screen plastic on the IC! I also will admit, it was the first install the Agoura Hills SC in Los Angeles had ever done. They explained they had to remove the A/B pillars and even the top of the dash to do the work too...

Just thought I'd drop back in here and say thank you...they removed my labour charge and saved me $200+, thanks for your help! Car should be ready for pickup today. Cheers

Awesome, thank you! Saving a few hundreds bucks is worth the argument ;)

Thanks a lot @Robotpedlr

Can anyone share their invoice with their personal info stricken/removed? And if possible, if you're in CA? I am still being charged for labor and tax on mine here next Monday and wondering why no one else seems to have the same. PM if better! Thanks a lot

As I said, price is not $2500 flat anymore...at least in CA. They must've recoded the products/services, so that the $2500 is taxed (likely a mistake as I've seen northern california invoices without it previously) and now includes $214.50 of labor. See attached screenshot of my appt/accepted...

It was: $2500 for the upgrade $210 for labor $250 for tax on the upgrade (no tax on labor) not charging for labor on first set of owners was likely a mistake.

Can you link the store pages? The one on Etsy only has one color available...hoping there's more out there. :)

I got an appt for Monday but unsure if I will go given the nature of things...perhaps just push a week. Also, my quote was different than most. It included (cant do a screenshot now) the $2500 fee, $210 and change for labor, and then the $2500 itself was taxed. The all-in cost was $2900 and...

Awesome review, thanks for that! Put a request in for next Monday, hopefully it sticks.

Anyone actually been invited yet?

I have a MCU1 and would caution that...very doubtful. Also, AP2.5 has nothing to do with MCU versions. Good luck.

I would only swap for a MCU2 at this point -- if that was included, then I would say yes

Reach out to @TonyT

If you're interested in a kit, I have one from the 2nd run. PM me...

Hi there, For those of that follow some of the mods in the Model S forum, this kit is largely discussed in here: 2nd run of camera switch that show a front image on the touch screen I used this for only a month before I realized I didn't use it much and just kept the HDMI portion. The full...

I have a full kit available -- front cam switcher w/ remotes, front camera, all cables and the panda CANBUS/giraffe piece as well. PM me if interested.

Awesome, I'll purchase them tonight. I'll PM you to share info.

If by chance you're up to doing a 2nd install once you get yours done, I'd be happy to meetup in the LA area and pay you for your services! Let me know and I can PM you. Very cool OP!

Thanks for the note! OC is no big deal for me for an afternoon -- can you let me know if you'd like another test guinea pig?? :) I'll PM you with my information. Keep me posted!

@Rockwell by any chance did you get your kit/find someone in the Los Angeles or nearby area to do it for you?

It shows delivery to the US by 10/2, yikes! Shipping is also $75. I like those brackets...but it seems like now teslaoffer and this seller are likely the same. What kind of confirms is the expensive shipping for about $200 to the states which makes it almost the same price as teslaoffer too...

Awesome. Do you have a link to that? Did you end up purchasing that one?