Search results

Anyone got any for sale?! :)

Hi, I am looking to see if anyone is looking to part ways with Unplugged Model S shocks to suit 2016.5 P90D. Ideally shipped complete with bags installed (given you can buy whole struts for a reasonable price). Located in Melbourne Australia. Thanks!

Can confirm the mod works with back to back dragy ;)

I have been having a bit of trouble with it, and can only seem to get the follow solar charging working a few times before it stops. I have used both my modified code, and the code from ngardiner/TWCManager Essentially a reboot fixes it, and then it stops again. Also have trouble now signining...

Have a mate who wants to use my referral code for a new m3p Went looking for it on app via loot box - no loot box Reinstalled app - still gone. Checked online account - missing. I called tesla, and their email response is as my current MS P90D was via private sale, I am not eligible. My last...

Theres a thread floating around, basically based on the serial number on battery, I believe you can see this tag via one of the wheel-wells.

Same, no Luda on p90d 2016.5. V3 battery too so the hardware is there... Its still feels lfaster than my insane p85d, but hard to find online actual real world comparisons of the p90d facelift non Luda vs. luda. 0-100km/h, qtr mile etc

By this thought, you could force a firmware upgrade to a p90d already equipped with the luda pack? (V3)? Rooting would affect software updates and service I'm guessing?

Any idea of spoiler postage cost to Australia?

Thanks will try

Thank you. I notice this doesn't seem to occur on mine, or the temperature is so low its in-perceivable.

Bump, anyone able to shed some light?

Hi Brains trust, Question re heated seats (tried searching and google to no avail) Are the seat back supports on the drivers/passenger seats meant to be heated? 2016 Facelift SP90D with the ventilated seats, no subzero package. I might be going mad, but I am pretty sure my old 2015 SP85D with...

Bump on this!!!

If you're actually keen on it, PM me. There are few in Aus, and with the exchange rate, are over $1000 landed. I checked the price when ad was posted, and the site was showing USD$530.

Hi All, Did a quick search and came up with nothing. Anyone had experience with steinbauer p90d upgrade? 50kW plus extra regen sounds pretty nice, but unsure on warranty (tesla), how it actually works (is it like a resistor mod, or changing power output curve?)...

EVAnnex tan/cream centre console insert, piano black, with second cupbolder. Finishes off the car nicely...

Perhaps slightly O.T. Is it possible to convert an existing non L p90d to p90dl, facelift with V3 battery? My understanding is it might be software only? And if yes, can it be remotely done or must be in person?

See attached code. To work on your system, you should just need to change the IP address, but this is always at your own risk. Issues noted: 1) Scheduling sometimes fails 2) Car charges when not required at 6A. 3) Stop issues sometimes (restarts not long after). I would be grateful for anyone...

EVAnnex tan/cream centre console insert, piano black, with second cupbolder. Finishes off the car nicely, especially for the pre-2016 cars with the boat floor centre console. https://evannex.com/…/center-console-insert-cci-tesla-model… Used for 1 year. WIth current USD/AUD and delivery these...

Much better than the 19's. And better than my 21's in the P85D I had, but hard to tell as that has the perf. suspension. I now wish for a set of UP shocks and lowering kit as it has changed the car into a really fun one to drive. No loss of grip either

I've got 20"x9" front and 20x10" rear.

Bump!

Update: Fairly vague responses from Tesla so far, and received this today, which strangely said 17.5A. "Hi Nick, Our Technician has looked further into your charger firmware unlock and has raised the work request required to increase your charge capacity to a max of 17.5A Please find the...

Found the switcher, now just need IRO AP2 Dashcam!

I'll see if I can get a better answer during service next week

Well that would explain a lot. Typical tesla fashion, limited information in regards to this being standard or an option. Cheers Nick Edit: Found this also: [Europe] 16.5 kW AC charging now standard for Model S and X ordered after 30th June 2017 - What will happen to all the existing...

Single charger, as noted, car is AP2.0, built after Jun 2016, and according to the below it should have 16.5kW onboard = ~24A three phase, hence the question. Charge Your Tesla Where You Park | Tesla Australia Home Charging Installation Tesla Charging Options for Australia Maybe the 16.5kW...

Hi All, I have a model S P90D AP2.0 (Oct 2016), and recently installed a 3phase charger at work. Max the car will charge at is 16A, however I believe the cars max should be 16.5kW (tesla website and calling them directly), allowing for 24A per phase. Anyone else had a similar issue? Cheers Nick

Im after the kit (minus rear camera, already bought one). https://teslamotorsclub.com/tmc/forums/tesla-parts-for-sale.72/create-thread Shoot me a PM if anyone has one they dont want!

Hi All, After the following: 1. IRO AP2 Dashcam 2. @artsci's "Front Camera Switcher Kit". I have already purchased another rear camera, but the cables, box, etc everything else needed to get working is what I need. Need postage to Australia! Shoot me a PM if you have either. Thanks!

Anyone have an issue with the scheduler? Two issues I’ve experienced: I set schedule charge 11pm to 7am, weekdays, track green energy weekend and I get the following occur: 1.5-2hrs charging when car is connected, regardless of time. Schedule working but still operates on weekends when it...

No worries, message me if sale falls through

What would postage to Australia be? Are The driver and passenger mats the same?

Item 1: EVAnnex tan/cream centre console insert, piano black, with second cupbolder. Finishes off the car nicely. https://evannex.com/…/center-console-insert-cci-tesla-model… Used for 1 year. WIth current USD/AUD and delivery these about $1,000 landed. Asking $780 plus post. Item 2: IRO AP1...

I had my p85d by affinese, they did (not sure if any more) TOCA club discounts. I did a half wrap and full ceramic

You've probably been asked this a million times, but possible to make a P90D V3 battery ludicrous via software only? Does this lock you to the current version, void any warranties etc? (I believe, but probably wrong, that the V3 battery just needs software to unlock ludicrous). PM me if...

Ok great. Thanks! Any estimate of Shipping of wheels (no tires) to Victoria, Australia?

I heard these need air suspension calibrated to 21". Does the 19" sit lower from factory? Also what was the approx drop at high/ultra? 1"?

Any other sales coming or deals for us Aussie tesla owners? Do you do the above Matt Black 20" staggered with a tyre package at all? Shoot me a pm if you like :)

Forgot to enable email notifications!

Hi all, Mods, sorry if this is this wrong section. Seeing if any owners are looking to upgrade or change to a M3 soon and looking to move on their facelift 2016 p90dl or early p100d. Ideally white or grey. I'm in Melbourne but will consider interstate if price is right. Thanks! Nick

H Compliance, I figured this out also. By running it as python 3, modifying rc.local I got it working. In addition I also got some code working to talk to my enphase system, and now I get actual house consumption (minus current charge) to work out total available amps. Worked great yesterday...

Scratch that, it is coming up with the same errors again. I will wait until someone can shed some light on this for me. Thanks in advance for all the help!

Sorry for the spamming. It seems to be working now without any changes? very strange. As a side note, I can't log into the TWC using my username and password. It says it is incorrect, but I just used the same for my phone... Maybe something to do with needing to login to the en_Au site...

It seems to have a problem with the ":" operator, the "^" with the syntax error above should be pointing to it. If I change that 1 to a , for debugging purposes, and then jumps to line 286, where the same syntax error appears. Any help would be great!

Hi All, Thanks for the effort and time in putting all this together. I am a bit stuck at this stage. I have set up the raspberry pi. Installed everything as instructed. Getting 4 red blinking LED's on the wall charger. Logging into the Pi and typing: screen -r TWCManager gives me: “There...

Fantastic stuff here! I recently had my Enphase system installed, and would like to install the above, but I am a python noob and not sure how to get the output of my solar system correctly working on the TWC code. Here is the IP details and the output. I want to use the net-consumption wNow...